diff options
Diffstat (limited to 'drivers/misc/habanalabs/gaudi/gaudi.c')
| -rw-r--r-- | drivers/misc/habanalabs/gaudi/gaudi.c | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index bd711c8d3874..03d3fb643e79 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -6175,6 +6175,164 @@ static int gaudi_debugfs_write64(struct hl_device *hdev, u64 addr, return rc; } +static int gaudi_dma_core_transfer(struct hl_device *hdev, int dma_id, u64 addr, + u32 size_to_dma, dma_addr_t dma_addr) +{ + u32 err_cause, val; + u64 dma_offset; + int rc; + + dma_offset = dma_id * DMA_CORE_OFFSET; + + WREG32(mmDMA0_CORE_SRC_BASE_LO + dma_offset, lower_32_bits(addr)); + WREG32(mmDMA0_CORE_SRC_BASE_HI + dma_offset, upper_32_bits(addr)); + WREG32(mmDMA0_CORE_DST_BASE_LO + dma_offset, lower_32_bits(dma_addr)); + WREG32(mmDMA0_CORE_DST_BASE_HI + dma_offset, upper_32_bits(dma_addr)); + WREG32(mmDMA0_CORE_DST_TSIZE_0 + dma_offset, size_to_dma); + WREG32(mmDMA0_CORE_COMMIT + dma_offset, + (1 << DMA0_CORE_COMMIT_LIN_SHIFT)); + + rc = hl_poll_timeout( + hdev, + mmDMA0_CORE_STS0 + dma_offset, + val, + ((val & DMA0_CORE_STS0_BUSY_MASK) == 0), + 0, + 1000000); + + if (rc) { + dev_err(hdev->dev, + "DMA %d timed-out during reading of 0x%llx\n", + dma_id, addr); + return -EIO; + } + + /* Verify DMA is OK */ + err_cause = RREG32(mmDMA0_CORE_ERR_CAUSE + dma_offset); + if (err_cause) { + dev_err(hdev->dev, "DMA Failed, cause 0x%x\n", err_cause); + dev_dbg(hdev->dev, + "Clearing DMA0 engine from errors (cause 0x%x)\n", + err_cause); + WREG32(mmDMA0_CORE_ERR_CAUSE + dma_offset, err_cause); + + return -EIO; + } + + return 0; +} + +static int gaudi_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size, + void *blob_addr) +{ + u32 dma_core_sts0, err_cause, cfg1, size_left, pos, size_to_dma; + struct gaudi_device *gaudi = hdev->asic_specific; + u64 dma_offset, qm_offset; + dma_addr_t dma_addr; + void *kernel_addr; + bool is_eng_idle; + int rc, dma_id; + + kernel_addr = hdev->asic_funcs->asic_dma_alloc_coherent( + hdev, SZ_2M, + &dma_addr, + GFP_KERNEL | __GFP_ZERO); + + if (!kernel_addr) + return -ENOMEM; + + mutex_lock(&gaudi->clk_gate_mutex); + + hdev->asic_funcs->disable_clock_gating(hdev); + + hdev->asic_funcs->hw_queues_lock(hdev); + + dma_id = gaudi_dma_assignment[GAUDI_PCI_DMA_1]; + dma_offset = dma_id * DMA_CORE_OFFSET; + qm_offset = dma_id * DMA_QMAN_OFFSET; + dma_core_sts0 = RREG32(mmDMA0_CORE_STS0 + dma_offset); + is_eng_idle = IS_DMA_IDLE(dma_core_sts0); + + if (!is_eng_idle) { + dma_id = gaudi_dma_assignment[GAUDI_PCI_DMA_2]; + dma_offset = dma_id * DMA_CORE_OFFSET; + qm_offset = dma_id * DMA_QMAN_OFFSET; + dma_core_sts0 = RREG32(mmDMA0_CORE_STS0 + dma_offset); + is_eng_idle = IS_DMA_IDLE(dma_core_sts0); + + if (!is_eng_idle) { + dev_err_ratelimited(hdev->dev, + "Can't read via DMA because it is BUSY\n"); + rc = -EAGAIN; + goto out; + } + } + + cfg1 = RREG32(mmDMA0_QM_GLBL_CFG1 + qm_offset); + WREG32(mmDMA0_QM_GLBL_CFG1 + qm_offset, + 0xF << DMA0_QM_GLBL_CFG1_CP_STOP_SHIFT); + + /* TODO: remove this by mapping the DMA temporary buffer to the MMU + * using the compute ctx ASID, if exists. If not, use the kernel ctx + * ASID + */ + WREG32_OR(mmDMA0_CORE_PROT + dma_offset, BIT(DMA0_CORE_PROT_VAL_SHIFT)); + + /* Verify DMA is OK */ + err_cause = RREG32(mmDMA0_CORE_ERR_CAUSE + dma_offset); + if (err_cause) { + dev_dbg(hdev->dev, + "Clearing DMA0 engine from errors (cause 0x%x)\n", + err_cause); + WREG32(mmDMA0_CORE_ERR_CAUSE + dma_offset, err_cause); + } + + pos = 0; + size_left = size; + size_to_dma = SZ_2M; + + while (size_left > 0) { + + if (size_left < SZ_2M) + size_to_dma = size_left; + + rc = gaudi_dma_core_transfer(hdev, dma_id, addr, size_to_dma, + dma_addr); + if (rc) + break; + + memcpy(blob_addr + pos, kernel_addr, size_to_dma); + + if (size_left <= SZ_2M) + break; + + pos += SZ_2M; + addr += SZ_2M; + size_left -= SZ_2M; + } + + /* TODO: remove this by mapping the DMA temporary buffer to the MMU + * using the compute ctx ASID, if exists. If not, use the kernel ctx + * ASID + */ + WREG32_AND(mmDMA0_CORE_PROT + dma_offset, + ~BIT(DMA0_CORE_PROT_VAL_SHIFT)); + + WREG32(mmDMA0_QM_GLBL_CFG1 + qm_offset, cfg1); + +out: + hdev->asic_funcs->hw_queues_unlock(hdev); + + hdev->asic_funcs->set_clock_gating(hdev); + + mutex_unlock(&gaudi->clk_gate_mutex); + + hdev->asic_funcs->asic_dma_free_coherent(hdev, SZ_2M, kernel_addr, + dma_addr); + + return rc; +} + static u64 gaudi_read_pte(struct hl_device *hdev, u64 addr) { struct gaudi_device *gaudi = hdev->asic_specific; @@ -8639,6 +8797,7 @@ static const struct hl_asic_funcs gaudi_funcs = { .debugfs_write32 = gaudi_debugfs_write32, .debugfs_read64 = gaudi_debugfs_read64, .debugfs_write64 = gaudi_debugfs_write64, + .debugfs_read_dma = gaudi_debugfs_read_dma, .add_device_attr = gaudi_add_device_attr, .handle_eqe = gaudi_handle_eqe, .set_pll_profile = gaudi_set_pll_profile, |