diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/hyperbus/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/mtd/maps/sa1100-flash.c | 1 | ||||
| -rw-r--r-- | drivers/mtd/nand/onenand/onenand_base.c | 1 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_micron.c | 14 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 5 |
5 files changed, 19 insertions, 6 deletions
diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig index cff6bbd226f5..a4d8968d133d 100644 --- a/drivers/mtd/hyperbus/Kconfig +++ b/drivers/mtd/hyperbus/Kconfig @@ -1,5 +1,6 @@ menuconfig MTD_HYPERBUS tristate "HyperBus support" + depends on HAS_IOMEM select MTD_CFI select MTD_MAP_BANK_WIDTH_2 select MTD_CFI_AMDSTD @@ -14,8 +15,9 @@ if MTD_HYPERBUS config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" + depends on ARM64 || COMPILE_TEST select MULTIPLEXER - select MUX_MMIO + imply MUX_MMIO help This is the driver for HyperBus controller on TI's AM65x and other SoCs diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 895510d40ce4..47602af4ee34 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -81,6 +81,7 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r default: printk(KERN_WARNING "SA1100 flash: unknown base address " "0x%08lx, assuming CS0\n", phys); + /* Fall through */ case SA1100_CS0_PHYS: subdev->map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4; diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c index a1f8fe1abb10..e082d632fb74 100644 --- a/drivers/mtd/nand/onenand/onenand_base.c +++ b/drivers/mtd/nand/onenand/onenand_base.c @@ -3259,6 +3259,7 @@ static void onenand_check_features(struct mtd_info *mtd) switch (density) { case ONENAND_DEVICE_DENSITY_8Gb: this->options |= ONENAND_HAS_NOP_1; + /* fall through */ case ONENAND_DEVICE_DENSITY_4Gb: if (ONENAND_IS_DDP(this)) this->options |= ONENAND_HAS_2PLANE; diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index 1622d3145587..8ca9fad6e6ad 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -390,6 +390,14 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip) (chip->id.data[4] & MICRON_ID_INTERNAL_ECC_MASK) != 0x2) return MICRON_ON_DIE_UNSUPPORTED; + /* + * It seems that there are devices which do not support ECC officially. + * At least the MT29F2G08ABAGA / MT29F2G08ABBGA devices supports + * enabling the ECC feature but don't reflect that to the READ_ID table. + * So we have to guarantee that we disable the ECC feature directly + * after we did the READ_ID table command. Later we can evaluate the + * ECC_ENABLE support. + */ ret = micron_nand_on_die_ecc_setup(chip, true); if (ret) return MICRON_ON_DIE_UNSUPPORTED; @@ -398,13 +406,13 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip) if (ret) return MICRON_ON_DIE_UNSUPPORTED; - if (!(id[4] & MICRON_ID_ECC_ENABLED)) - return MICRON_ON_DIE_UNSUPPORTED; - ret = micron_nand_on_die_ecc_setup(chip, false); if (ret) return MICRON_ON_DIE_UNSUPPORTED; + if (!(id[4] & MICRON_ID_ECC_ENABLED)) + return MICRON_ON_DIE_UNSUPPORTED; + ret = nand_readid_op(chip, 0, id, sizeof(id)); if (ret) return MICRON_ON_DIE_UNSUPPORTED; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 03cc788511d5..654bdc41fc99 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -3780,8 +3780,6 @@ static int spi_nor_init_params(struct spi_nor *nor, default: /* Kept only for backward compatibility purpose. */ params->quad_enable = spansion_quad_enable; - if (nor->clear_sr_bp) - nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp; break; } @@ -4035,6 +4033,9 @@ static int spi_nor_init(struct spi_nor *nor) int err; if (nor->clear_sr_bp) { + if (nor->quad_enable == spansion_quad_enable) + nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp; + err = nor->clear_sr_bp(nor); if (err) { dev_err(nor->dev, |