diff options
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 94 |
1 files changed, 93 insertions, 1 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index de7692b763d8..a67cac15a724 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -558,7 +558,7 @@ mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) val |= 0x190000 << RG_COREPLL_SDM_PCW_S; mt7530_write(priv, MT7531_PLLGP_CR0, val); break; - }; + } /* Set feedback divide ratio update signal to high */ val = mt7530_read(priv, MT7531_PLLGP_CR0); @@ -870,6 +870,46 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } +static int +mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct mt7530_priv *priv = ds->priv; + unsigned int secs = msecs / 1000; + unsigned int tmp_age_count; + unsigned int error = -1; + unsigned int age_count; + unsigned int age_unit; + + /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */ + if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1)) + return -ERANGE; + + /* iterate through all possible age_count to find the closest pair */ + for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) { + unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1; + + if (tmp_age_unit <= AGE_UNIT_MAX) { + unsigned int tmp_error = secs - + (tmp_age_count + 1) * (tmp_age_unit + 1); + + /* found a closer pair */ + if (error > tmp_error) { + error = tmp_error; + age_count = tmp_age_count; + age_unit = tmp_age_unit; + } + + /* found the exact match, so break the loop */ + if (!error) + break; + } + } + + mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit)); + + return 0; +} + static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; @@ -1021,6 +1061,53 @@ mt7530_port_disable(struct dsa_switch *ds, int port) mutex_unlock(&priv->reg_mutex); } +static int +mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct mt7530_priv *priv = ds->priv; + struct mii_bus *bus = priv->bus; + int length; + u32 val; + + /* When a new MTU is set, DSA always set the CPU port's MTU to the + * largest MTU of the slave ports. Because the switch only has a global + * RX length register, only allowing CPU port here is enough. + */ + if (!dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + val = mt7530_mii_read(priv, MT7530_GMACCR); + val &= ~MAX_RX_PKT_LEN_MASK; + + /* RX length also includes Ethernet header, MTK tag, and FCS length */ + length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; + if (length <= 1522) { + val |= MAX_RX_PKT_LEN_1522; + } else if (length <= 1536) { + val |= MAX_RX_PKT_LEN_1536; + } else if (length <= 1552) { + val |= MAX_RX_PKT_LEN_1552; + } else { + val &= ~MAX_RX_JUMBO_MASK; + val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); + val |= MAX_RX_PKT_LEN_JUMBO; + } + + mt7530_mii_write(priv, MT7530_GMACCR, val); + + mutex_unlock(&bus->mdio_lock); + + return 0; +} + +static int +mt7530_port_max_mtu(struct dsa_switch *ds, int port) +{ + return MT7530_MAX_MTU; +} + static void mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) { @@ -1570,6 +1657,7 @@ mt7530_setup(struct dsa_switch *ds) */ dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; ds->configure_vlan_while_not_filtering = true; + ds->mtu_enforcement_ingress = true; if (priv->id == ID_MT7530) { regulator_set_voltage(priv->core_pwr, 1000000, 1000000); @@ -1808,6 +1896,7 @@ mt7531_setup(struct dsa_switch *ds) } ds->configure_vlan_while_not_filtering = true; + ds->mtu_enforcement_ingress = true; /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); @@ -2517,8 +2606,11 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .phy_write = mt753x_phy_write, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, + .set_ageing_time = mt7530_set_ageing_time, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, + .port_change_mtu = mt7530_port_change_mtu, + .port_max_mtu = mt7530_port_max_mtu, .port_stp_state_set = mt7530_stp_state_set, .port_bridge_join = mt7530_port_bridge_join, .port_bridge_leave = mt7530_port_bridge_leave, |