summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ibm/emac/core.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/ibm/emac/core.h')
-rw-r--r--drivers/net/ethernet/ibm/emac/core.h462
1 files changed, 462 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
new file mode 100644
index 000000000000..4fec0844d59d
--- /dev/null
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -0,0 +1,462 @@
+/*
+ * drivers/net/ibm_newemac/core.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller.
+ *
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * Armin Kuster <akuster@mvista.com>
+ * Johnnie Peters <jpeters@mvista.com>
+ * Copyright 2000, 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_NEWEMAC_CORE_H
+#define __IBM_NEWEMAC_CORE_H
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/dcr.h>
+
+#include "emac.h"
+#include "phy.h"
+#include "zmii.h"
+#include "rgmii.h"
+#include "mal.h"
+#include "tah.h"
+#include "debug.h"
+
+#define NUM_TX_BUFF CONFIG_IBM_NEW_EMAC_TXB
+#define NUM_RX_BUFF CONFIG_IBM_NEW_EMAC_RXB
+
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
+#endif
+
+#define EMAC_MIN_MTU 46
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+ if (mtu > ETH_DATA_LEN)
+ return MAL_MAX_RX_SIZE;
+ else
+ return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment())
+
+#define EMAC_RX_SKB_HEADROOM \
+ EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM)
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+ int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+ return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+ return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ * - normal statistics (packet count, etc)
+ * - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
+ */
+
+/* Normal TX/RX Statistics */
+struct emac_stats {
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 tx_packets;
+ u64 tx_bytes;
+ u64 rx_packets_csum;
+ u64 tx_packets_csum;
+};
+
+/* Error statistics */
+struct emac_error_stats {
+ u64 tx_undo;
+
+ /* Software RX Errors */
+ u64 rx_dropped_stack;
+ u64 rx_dropped_oom;
+ u64 rx_dropped_error;
+ u64 rx_dropped_resize;
+ u64 rx_dropped_mtu;
+ u64 rx_stopped;
+ /* BD reported RX errors */
+ u64 rx_bd_errors;
+ u64 rx_bd_overrun;
+ u64 rx_bd_bad_packet;
+ u64 rx_bd_runt_packet;
+ u64 rx_bd_short_event;
+ u64 rx_bd_alignment_error;
+ u64 rx_bd_bad_fcs;
+ u64 rx_bd_packet_too_long;
+ u64 rx_bd_out_of_range;
+ u64 rx_bd_in_range;
+ /* EMAC IRQ reported RX errors */
+ u64 rx_parity;
+ u64 rx_fifo_overrun;
+ u64 rx_overrun;
+ u64 rx_bad_packet;
+ u64 rx_runt_packet;
+ u64 rx_short_event;
+ u64 rx_alignment_error;
+ u64 rx_bad_fcs;
+ u64 rx_packet_too_long;
+ u64 rx_out_of_range;
+ u64 rx_in_range;
+
+ /* Software TX Errors */
+ u64 tx_dropped;
+ /* BD reported TX errors */
+ u64 tx_bd_errors;
+ u64 tx_bd_bad_fcs;
+ u64 tx_bd_carrier_loss;
+ u64 tx_bd_excessive_deferral;
+ u64 tx_bd_excessive_collisions;
+ u64 tx_bd_late_collision;
+ u64 tx_bd_multple_collisions;
+ u64 tx_bd_single_collision;
+ u64 tx_bd_underrun;
+ u64 tx_bd_sqe;
+ /* EMAC IRQ reported TX errors */
+ u64 tx_parity;
+ u64 tx_underrun;
+ u64 tx_sqe;
+ u64 tx_errors;
+};
+
+#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct emac_stats) + \
+ sizeof(struct emac_error_stats)) \
+ / sizeof(u64))
+
+struct emac_instance {
+ struct net_device *ndev;
+ struct resource rsrc_regs;
+ struct emac_regs __iomem *emacp;
+ struct platform_device *ofdev;
+ struct device_node **blist; /* bootlist entry */
+
+ /* MAL linkage */
+ u32 mal_ph;
+ struct platform_device *mal_dev;
+ u32 mal_rx_chan;
+ u32 mal_tx_chan;
+ struct mal_instance *mal;
+ struct mal_commac commac;
+
+ /* PHY infos */
+ u32 phy_mode;
+ u32 phy_map;
+ u32 phy_address;
+ u32 phy_feat_exc;
+ struct mii_phy phy;
+ struct mutex link_lock;
+ struct delayed_work link_work;
+ int link_polling;
+
+ /* GPCS PHY infos */
+ u32 gpcs_address;
+
+ /* Shared MDIO if any */
+ u32 mdio_ph;
+ struct platform_device *mdio_dev;
+ struct emac_instance *mdio_instance;
+ struct mutex mdio_lock;
+
+ /* ZMII infos if any */
+ u32 zmii_ph;
+ u32 zmii_port;
+ struct platform_device *zmii_dev;
+
+ /* RGMII infos if any */
+ u32 rgmii_ph;
+ u32 rgmii_port;
+ struct platform_device *rgmii_dev;
+
+ /* TAH infos if any */
+ u32 tah_ph;
+ u32 tah_port;
+ struct platform_device *tah_dev;
+
+ /* IRQs */
+ int wol_irq;
+ int emac_irq;
+
+ /* OPB bus frequency in Mhz */
+ u32 opb_bus_freq;
+
+ /* Cell index within an ASIC (for clk mgmnt) */
+ u32 cell_index;
+
+ /* Max supported MTU */
+ u32 max_mtu;
+
+ /* Feature bits (from probe table) */
+ unsigned int features;
+
+ /* Tx and Rx fifo sizes & other infos in bytes */
+ u32 tx_fifo_size;
+ u32 tx_fifo_size_gige;
+ u32 rx_fifo_size;
+ u32 rx_fifo_size_gige;
+ u32 fifo_entry_size;
+ u32 mal_burst_size; /* move to MAL ? */
+
+ /* IAHT and GAHT filter parameterization */
+ u32 xaht_slots_shift;
+ u32 xaht_width_shift;
+
+ /* Descriptor management
+ */
+ struct mal_descriptor *tx_desc;
+ int tx_cnt;
+ int tx_slot;
+ int ack_slot;
+
+ struct mal_descriptor *rx_desc;
+ int rx_slot;
+ struct sk_buff *rx_sg_skb; /* 1 */
+ int rx_skb_size;
+ int rx_sync_size;
+
+ struct sk_buff *tx_skb[NUM_TX_BUFF];
+ struct sk_buff *rx_skb[NUM_RX_BUFF];
+
+ /* Stats
+ */
+ struct emac_error_stats estats;
+ struct net_device_stats nstats;
+ struct emac_stats stats;
+
+ /* Misc
+ */
+ int reset_failed;
+ int stop_timeout; /* in us */
+ int no_mcast;
+ int mcast_pending;
+ int opened;
+ struct work_struct reset_work;
+ spinlock_t lock;
+};
+
+/*
+ * Features of various EMAC implementations
+ */
+
+/*
+ * No flow control on 40x according to the original driver
+ */
+#define EMAC_FTR_NO_FLOW_CONTROL_40x 0x00000001
+/*
+ * Cell is an EMAC4
+ */
+#define EMAC_FTR_EMAC4 0x00000002
+/*
+ * For the 440SPe, AMCC inexplicably changed the polarity of
+ * the "operation complete" bit in the MII control register.
+ */
+#define EMAC_FTR_STACR_OC_INVERT 0x00000004
+/*
+ * Set if we have a TAH.
+ */
+#define EMAC_FTR_HAS_TAH 0x00000008
+/*
+ * Set if we have a ZMII.
+ */
+#define EMAC_FTR_HAS_ZMII 0x00000010
+/*
+ * Set if we have a RGMII.
+ */
+#define EMAC_FTR_HAS_RGMII 0x00000020
+/*
+ * Set if we have new type STACR with STAOPC
+ */
+#define EMAC_FTR_HAS_NEW_STACR 0x00000040
+/*
+ * Set if we need phy clock workaround for 440gx
+ */
+#define EMAC_FTR_440GX_PHY_CLK_FIX 0x00000080
+/*
+ * Set if we need phy clock workaround for 440ep or 440gr
+ */
+#define EMAC_FTR_440EP_PHY_CLK_FIX 0x00000100
+/*
+ * The 405EX and 460EX contain the EMAC4SYNC core
+ */
+#define EMAC_FTR_EMAC4SYNC 0x00000200
+/*
+ * Set if we need phy clock workaround for 460ex or 460gt
+ */
+#define EMAC_FTR_460EX_PHY_CLK_FIX 0x00000400
+
+
+/* Right now, we don't quite handle the always/possible masks on the
+ * most optimal way as we don't have a way to say something like
+ * always EMAC4. Patches welcome.
+ */
+enum {
+ EMAC_FTRS_ALWAYS = 0,
+
+ EMAC_FTRS_POSSIBLE =
+#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
+ EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC |
+ EMAC_FTR_HAS_NEW_STACR |
+ EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_TAH
+ EMAC_FTR_HAS_TAH |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_ZMII
+ EMAC_FTR_HAS_ZMII |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_RGMII
+ EMAC_FTR_HAS_RGMII |
+#endif
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
+ EMAC_FTR_NO_FLOW_CONTROL_40x |
+#endif
+ EMAC_FTR_460EX_PHY_CLK_FIX |
+ EMAC_FTR_440EP_PHY_CLK_FIX,
+};
+
+static inline int emac_has_feature(struct emac_instance *dev,
+ unsigned long feature)
+{
+ return (EMAC_FTRS_ALWAYS & feature) ||
+ (EMAC_FTRS_POSSIBLE & dev->features & feature);
+}
+
+/*
+ * Various instances of the EMAC core have varying 1) number of
+ * address match slots, 2) width of the registers for handling address
+ * match slots, 3) number of registers for handling address match
+ * slots and 4) base offset for those registers.
+ *
+ * These macros and inlines handle these differences based on
+ * parameters supplied by the device structure which are, in turn,
+ * initialized based on the "compatible" entry in the device tree.
+ */
+
+#define EMAC4_XAHT_SLOTS_SHIFT 6
+#define EMAC4_XAHT_WIDTH_SHIFT 4
+
+#define EMAC4SYNC_XAHT_SLOTS_SHIFT 8
+#define EMAC4SYNC_XAHT_WIDTH_SHIFT 5
+
+#define EMAC_XAHT_SLOTS(dev) (1 << (dev)->xaht_slots_shift)
+#define EMAC_XAHT_WIDTH(dev) (1 << (dev)->xaht_width_shift)
+#define EMAC_XAHT_REGS(dev) (1 << ((dev)->xaht_slots_shift - \
+ (dev)->xaht_width_shift))
+
+#define EMAC_XAHT_CRC_TO_SLOT(dev, crc) \
+ ((EMAC_XAHT_SLOTS(dev) - 1) - \
+ ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) - \
+ (dev)->xaht_slots_shift)))
+
+#define EMAC_XAHT_SLOT_TO_REG(dev, slot) \
+ ((slot) >> (dev)->xaht_width_shift)
+
+#define EMAC_XAHT_SLOT_TO_MASK(dev, slot) \
+ ((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >> \
+ ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))
+
+static inline u32 *emac_xaht_base(struct emac_instance *dev)
+{
+ struct emac_regs __iomem *p = dev->emacp;
+ int offset;
+
+ /* The first IAHT entry always is the base of the block of
+ * IAHT and GAHT registers.
+ */
+ if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
+ offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
+ else
+ offset = offsetof(struct emac_regs, u0.emac4.iaht1);
+
+ return (u32 *)((ptrdiff_t)p + offset);
+}
+
+static inline u32 *emac_gaht_base(struct emac_instance *dev)
+{
+ /* GAHT registers always come after an identical number of
+ * IAHT registers.
+ */
+ return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev);
+}
+
+static inline u32 *emac_iaht_base(struct emac_instance *dev)
+{
+ /* IAHT registers always come before an identical number of
+ * GAHT registers.
+ */
+ return emac_xaht_base(dev);
+}
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
+ * when available.
+ *
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII 0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII 0x00000002
+#define EMAC_ETHTOOL_REGS_TAH 0x00000004
+
+struct emac_ethtool_regs_hdr {
+ u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+ u32 version;
+ u32 index;
+};
+
+#define EMAC_ETHTOOL_REGS_VER 0
+#define EMAC_ETHTOOL_REGS_SIZE(dev) ((dev)->rsrc_regs.end - \
+ (dev)->rsrc_regs.start + 1)
+#define EMAC4_ETHTOOL_REGS_VER 1
+#define EMAC4_ETHTOOL_REGS_SIZE(dev) ((dev)->rsrc_regs.end - \
+ (dev)->rsrc_regs.start + 1)
+
+#endif /* __IBM_NEWEMAC_CORE_H */