summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/sfc/siena.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/sfc/siena.c')
-rw-r--r--drivers/net/ethernet/sfc/siena.c25
1 files changed, 24 insertions, 1 deletions
diff --git a/drivers/net/ethernet/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c
index ba40f67e4f05..51669244d154 100644
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -202,7 +202,7 @@ out:
static enum reset_type siena_map_reset_reason(enum reset_type reason)
{
- return RESET_TYPE_ALL;
+ return RESET_TYPE_RECOVER_OR_ALL;
}
static int siena_map_reset_flags(u32 *flags)
@@ -245,6 +245,22 @@ static int siena_reset_hw(struct efx_nic *efx, enum reset_type method)
return efx_mcdi_reset_port(efx);
}
+#ifdef CONFIG_EEH
+/* When a PCI device is isolated from the bus, a subsequent MMIO read is
+ * required for the kernel EEH mechanisms to notice. As the Solarflare driver
+ * was written to minimise MMIO read (for latency) then a periodic call to check
+ * the EEH status of the device is required so that device recovery can happen
+ * in a timely fashion.
+ */
+static void siena_monitor(struct efx_nic *efx)
+{
+ struct eeh_dev *eehdev =
+ of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
+
+ eeh_dev_check_failure(eehdev);
+}
+#endif
+
static int siena_probe_nvconfig(struct efx_nic *efx)
{
u32 caps = 0;
@@ -398,6 +414,8 @@ static int siena_init_nic(struct efx_nic *efx)
EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_HASH_INSRT_HDR, 1);
EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_HASH_ALG, 1);
EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_IP_HASH, 1);
+ EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_USR_BUF_SIZE,
+ EFX_RX_USR_BUF_SIZE >> 5);
efx_writeo(efx, &temp, FR_AZ_RX_CFG);
/* Set hash key for IPv4 */
@@ -665,7 +683,11 @@ const struct efx_nic_type siena_a0_nic_type = {
.init = siena_init_nic,
.dimension_resources = siena_dimension_resources,
.fini = efx_port_dummy_op_void,
+#ifdef CONFIG_EEH
+ .monitor = siena_monitor,
+#else
.monitor = NULL,
+#endif
.map_reset_reason = siena_map_reset_reason,
.map_reset_flags = siena_map_reset_flags,
.reset = siena_reset_hw,
@@ -698,6 +720,7 @@ const struct efx_nic_type siena_a0_nic_type = {
.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
.rx_buffer_hash_size = 0x10,
.rx_buffer_padding = 0,
+ .can_rx_scatter = true,
.max_interrupt_mode = EFX_INT_MODE_MSIX,
.phys_addr_channels = 32, /* Hardware limit is 64, but the legacy
* interrupt handler only supports 32