summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc')
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc272
1 files changed, 272 insertions, 0 deletions
diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
new file mode 100644
index 000000000000..d090d1884fb7
--- /dev/null
+++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc
@@ -0,0 +1,272 @@
+/*
+ * TX ucode for the Intel IXP2400 in POS-PHY mode.
+ * Copyright (C) 2004, 2005 Lennert Buytenhek
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Assumptions made in this code:
+ * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
+ * only one TBUF partition is used. This includes, for example,
+ * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This
+ * is not an exhaustive list.)
+ * - The TBUF uses 64-byte mpackets.
+ * - TX descriptors reside in SRAM, and have the following format:
+ * struct tx_desc
+ * {
+ * // to uengine
+ * u32 buf_phys_addr;
+ * u32 pkt_length;
+ * u32 channel;
+ * };
+ * - Packet data resides in DRAM.
+ * - Packet buffer addresses are 8-byte aligned.
+ * - Scratch ring 2 is tx_pending.
+ * - Scratch ring 3 is tx_done, and has status condition 'full'.
+ * - This code is run on all eight threads of the microengine it runs on.
+ */
+
+#define TX_SEQUENCE_0 0x0060
+#define TBUF_CTRL 0x1800
+
+#define PARTITION_SIZE 128
+#define PARTITION_THRESH 96
+
+
+ .sig volatile sig1
+ .sig volatile sig2
+ .sig volatile sig3
+
+ .reg @old_tx_seq_0
+ .reg @mpkts_in_flight
+ .reg @next_tbuf_mpacket
+
+ .reg @buffer_handle
+ .reg @buffer_start
+ .reg @packet_length
+ .reg @channel
+ .reg @packet_offset
+
+ .reg zero
+
+ immed[zero, 0]
+
+ /*
+ * Skip context 0 initialisation?
+ */
+ .begin
+ br!=ctx[0, mpacket_tx_loop#]
+ .end
+
+ /*
+ * Wait until all pending TBUF elements have been transmitted.
+ */
+ .begin
+ .reg read $tx
+ .sig zzz
+
+ loop_empty#:
+ msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
+ alu_shf[--, --, b, $tx, >>31]
+ beq[loop_empty#]
+
+ alu[@old_tx_seq_0, --, b, $tx]
+ .end
+
+ immed[@mpkts_in_flight, 0]
+ alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)]
+
+ immed[@buffer_handle, 0]
+
+ /*
+ * Initialise signal pipeline.
+ */
+ .begin
+ local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
+ .set_sig sig1
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
+ .set_sig sig2
+
+ local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
+ .set_sig sig3
+ .end
+
+mpacket_tx_loop#:
+ .begin
+ .reg tbuf_element_index
+ .reg buffer_handle
+ .reg sop_eop
+ .reg packet_data
+ .reg channel
+ .reg mpacket_size
+
+ /*
+ * If there is no packet currently being transmitted,
+ * dequeue the next TX descriptor, and fetch the buffer
+ * address, packet length and destination channel number.
+ */
+ .begin
+ .reg read $stemp $stemp2 $stemp3
+ .xfer_order $stemp $stemp2 $stemp3
+ .sig zzz
+
+ ctx_arb[sig1]
+
+ alu[--, --, b, @buffer_handle]
+ bne[already_got_packet#]
+
+ tx_nobufs#:
+ scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz]
+ alu[@buffer_handle, --, b, $stemp]
+ beq[tx_nobufs#]
+
+ sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz]
+ alu[@buffer_start, --, b, $stemp]
+ alu[@packet_length, --, b, $stemp2]
+ beq[zero_byte_packet#]
+ alu[@channel, --, b, $stemp3]
+ immed[@packet_offset, 0]
+
+ already_got_packet#:
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
+ .end
+
+ /*
+ * Determine tbuf element index, SOP/EOP flags, mpacket
+ * offset and mpacket size and cache buffer_handle and
+ * channel number.
+ */
+ .begin
+ alu[tbuf_element_index, --, b, @next_tbuf_mpacket]
+ alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1]
+ alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and,
+ (PARTITION_SIZE - 1)]
+
+ alu[buffer_handle, --, b, @buffer_handle]
+ immed[@buffer_handle, 0]
+
+ immed[sop_eop, 1]
+
+ alu[packet_data, --, b, @packet_offset]
+ bne[no_sop#]
+ alu[sop_eop, sop_eop, or, 2]
+ no_sop#:
+ alu[packet_data, packet_data, +, @buffer_start]
+
+ alu[channel, --, b, @channel]
+
+ alu[mpacket_size, @packet_length, -, @packet_offset]
+ alu[--, 64, -, mpacket_size]
+ bhs[eop#]
+ alu[@buffer_handle, --, b, buffer_handle]
+ immed[mpacket_size, 64]
+ alu[sop_eop, sop_eop, and, 2]
+ eop#:
+
+ alu[@packet_offset, @packet_offset, +, mpacket_size]
+ .end
+
+ /*
+ * Wait until there's enough space in the TBUF.
+ */
+ .begin
+ .reg read $tx
+ .reg temp
+ .sig zzz
+
+ ctx_arb[sig2]
+
+ br[test_space#]
+
+ loop_space#:
+ msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz]
+
+ alu[temp, $tx, -, @old_tx_seq_0]
+ alu[temp, temp, and, 0xff]
+ alu[@mpkts_in_flight, @mpkts_in_flight, -, temp]
+
+ alu[@old_tx_seq_0, --, b, $tx]
+
+ test_space#:
+ alu[--, PARTITION_THRESH, -, @mpkts_in_flight]
+ blo[loop_space#]
+
+ alu[@mpkts_in_flight, @mpkts_in_flight, +, 1]
+
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
+ .end
+
+ /*
+ * Copy the packet data to the TBUF.
+ */
+ .begin
+ .reg temp
+ .sig copy_sig
+
+ alu[temp, mpacket_size, -, 1]
+ alu_shf[temp, 0x10, or, temp, >>3]
+ alu_shf[temp, 0x10, or, temp, <<21]
+ alu_shf[temp, temp, or, tbuf_element_index, <<11]
+ alu_shf[--, temp, or, 1, <<18]
+
+ dram[tbuf_wr, --, packet_data, 0, max_8],
+ indirect_ref, sig_done[copy_sig]
+ ctx_arb[copy_sig]
+ .end
+
+ /*
+ * Mark TBUF element as ready-to-be-transmitted.
+ */
+ .begin
+ .reg write $tsw $tsw2
+ .xfer_order $tsw $tsw2
+ .reg temp
+ .sig zzz
+
+ alu_shf[temp, channel, or, mpacket_size, <<24]
+ alu_shf[$tsw, temp, or, sop_eop, <<8]
+ immed[$tsw2, 0]
+
+ immed[temp, TBUF_CTRL]
+ alu_shf[temp, temp, or, tbuf_element_index, <<3]
+ msf[write, $tsw, temp, 0, 2], ctx_swap[zzz]
+ .end
+
+ /*
+ * Resynchronise.
+ */
+ .begin
+ ctx_arb[sig3]
+ local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
+ .end
+
+ /*
+ * If this was an EOP mpacket, recycle the TX buffer
+ * and signal the host.
+ */
+ .begin
+ .reg write $stemp
+ .sig zzz
+
+ alu[--, sop_eop, and, 1]
+ beq[mpacket_tx_loop#]
+
+ tx_done_ring_full#:
+ br_inp_state[SCR_Ring3_Status, tx_done_ring_full#]
+
+ alu[$stemp, --, b, buffer_handle]
+ scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz]
+ cap[fast_wr, 0, XSCALE_INT_A]
+ br[mpacket_tx_loop#]
+ .end
+ .end
+
+
+zero_byte_packet#:
+ halt
+
+