summaryrefslogtreecommitdiff
path: root/drivers/net/sfc/spi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/spi.h')
-rw-r--r--drivers/net/sfc/spi.h89
1 files changed, 42 insertions, 47 deletions
diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h
index 34412f3d41c9..feef61942377 100644
--- a/drivers/net/sfc/spi.h
+++ b/drivers/net/sfc/spi.h
@@ -19,53 +19,48 @@
*
*************************************************************************/
-/*
- * Commands common to all known devices.
- *
+#define SPI_WRSR 0x01 /* Write status register */
+#define SPI_WRITE 0x02 /* Write data to memory array */
+#define SPI_READ 0x03 /* Read data from memory array */
+#define SPI_WRDI 0x04 /* Reset write enable latch */
+#define SPI_RDSR 0x05 /* Read status register */
+#define SPI_WREN 0x06 /* Set write enable latch */
+
+#define SPI_STATUS_WPEN 0x80 /* Write-protect pin enabled */
+#define SPI_STATUS_BP2 0x10 /* Block protection bit 2 */
+#define SPI_STATUS_BP1 0x08 /* Block protection bit 1 */
+#define SPI_STATUS_BP0 0x04 /* Block protection bit 0 */
+#define SPI_STATUS_WEN 0x02 /* State of the write enable latch */
+#define SPI_STATUS_NRDY 0x01 /* Device busy flag */
+
+/**
+ * struct efx_spi_device - an Efx SPI (Serial Peripheral Interface) device
+ * @efx: The Efx controller that owns this device
+ * @device_id: Controller's id for the device
+ * @size: Size (in bytes)
+ * @addr_len: Number of address bytes in read/write commands
+ * @munge_address: Flag whether addresses should be munged.
+ * Some devices with 9-bit addresses (e.g. AT25040A EEPROM)
+ * use bit 3 of the command byte as address bit A8, rather
+ * than having a two-byte address. If this flag is set, then
+ * commands should be munged in this way.
+ * @block_size: Write block size (in bytes).
+ * Write commands are limited to blocks with this size and alignment.
+ * @read: Read function for the device
+ * @write: Write function for the device
*/
-
-/* Write status register */
-#define SPI_WRSR 0x01
-
-/* Write data to memory array */
-#define SPI_WRITE 0x02
-
-/* Read data from memory array */
-#define SPI_READ 0x03
-
-/* Reset write enable latch */
-#define SPI_WRDI 0x04
-
-/* Read status register */
-#define SPI_RDSR 0x05
-
-/* Set write enable latch */
-#define SPI_WREN 0x06
-
-/* SST: Enable write to status register */
-#define SPI_SST_EWSR 0x50
-
-/*
- * Status register bits. Not all bits are supported on all devices.
- *
- */
-
-/* Write-protect pin enabled */
-#define SPI_STATUS_WPEN 0x80
-
-/* Block protection bit 2 */
-#define SPI_STATUS_BP2 0x10
-
-/* Block protection bit 1 */
-#define SPI_STATUS_BP1 0x08
-
-/* Block protection bit 0 */
-#define SPI_STATUS_BP0 0x04
-
-/* State of the write enable latch */
-#define SPI_STATUS_WEN 0x02
-
-/* Device busy flag */
-#define SPI_STATUS_NRDY 0x01
+struct efx_spi_device {
+ struct efx_nic *efx;
+ int device_id;
+ unsigned int size;
+ unsigned int addr_len;
+ unsigned int munge_address:1;
+ unsigned int block_size;
+};
+
+int falcon_spi_read(const struct efx_spi_device *spi, loff_t start,
+ size_t len, size_t *retlen, u8 *buffer);
+int falcon_spi_write(const struct efx_spi_device *spi, loff_t start,
+ size_t len, size_t *retlen, const u8 *buffer);
#endif /* EFX_SPI_H */