summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-dw-dma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-dw-dma.c')
-rw-r--r--drivers/spi/spi-dw-dma.c332
1 files changed, 248 insertions, 84 deletions
diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index bb390ff67d1d..a09831c62192 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -17,7 +17,6 @@
#include "spi-dw.h"
-#define WAIT_RETRIES 5
#define RX_BUSY 0
#define RX_BURST_LEVEL 16
#define TX_BUSY 1
@@ -49,6 +48,7 @@ static void dw_spi_dma_maxburst_init(struct dw_spi *dws)
max_burst = RX_BURST_LEVEL;
dws->rxburst = min(max_burst, def_burst);
+ dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1);
ret = dma_get_slave_caps(dws->txchan, &caps);
if (!ret && caps.max_burst)
@@ -56,7 +56,36 @@ static void dw_spi_dma_maxburst_init(struct dw_spi *dws)
else
max_burst = TX_BURST_LEVEL;
+ /*
+ * Having a Rx DMA channel serviced with higher priority than a Tx DMA
+ * channel might not be enough to provide a well balanced DMA-based
+ * SPI transfer interface. There might still be moments when the Tx DMA
+ * channel is occasionally handled faster than the Rx DMA channel.
+ * That in its turn will eventually cause the SPI Rx FIFO overflow if
+ * SPI bus speed is high enough to fill the SPI Rx FIFO in before it's
+ * cleared by the Rx DMA channel. In order to fix the problem the Tx
+ * DMA activity is intentionally slowed down by limiting the SPI Tx
+ * FIFO depth with a value twice bigger than the Tx burst length.
+ */
dws->txburst = min(max_burst, def_burst);
+ dw_writel(dws, DW_SPI_DMATDLR, dws->txburst);
+}
+
+static void dw_spi_dma_sg_burst_init(struct dw_spi *dws)
+{
+ struct dma_slave_caps tx = {0}, rx = {0};
+
+ dma_get_slave_caps(dws->txchan, &tx);
+ dma_get_slave_caps(dws->rxchan, &rx);
+
+ if (tx.max_sg_burst > 0 && rx.max_sg_burst > 0)
+ dws->dma_sg_burst = min(tx.max_sg_burst, rx.max_sg_burst);
+ else if (tx.max_sg_burst > 0)
+ dws->dma_sg_burst = tx.max_sg_burst;
+ else if (rx.max_sg_burst > 0)
+ dws->dma_sg_burst = rx.max_sg_burst;
+ else
+ dws->dma_sg_burst = 0;
}
static int dw_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
@@ -96,6 +125,8 @@ static int dw_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
dw_spi_dma_maxburst_init(dws);
+ dw_spi_dma_sg_burst_init(dws);
+
return 0;
free_rxchan:
@@ -125,6 +156,8 @@ static int dw_spi_dma_init_generic(struct device *dev, struct dw_spi *dws)
dw_spi_dma_maxburst_init(dws);
+ dw_spi_dma_sg_burst_init(dws);
+
return 0;
}
@@ -139,23 +172,14 @@ static void dw_spi_dma_exit(struct dw_spi *dws)
dmaengine_terminate_sync(dws->rxchan);
dma_release_channel(dws->rxchan);
}
-
- dw_writel(dws, DW_SPI_DMACR, 0);
}
static irqreturn_t dw_spi_dma_transfer_handler(struct dw_spi *dws)
{
- u16 irq_status = dw_readl(dws, DW_SPI_ISR);
-
- if (!irq_status)
- return IRQ_NONE;
-
- dw_readl(dws, DW_SPI_ICR);
- spi_reset_chip(dws);
+ dw_spi_check_status(dws, false);
- dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__);
- dws->master->cur_msg->status = -EIO;
complete(&dws->dma_completion);
+
return IRQ_HANDLED;
}
@@ -177,12 +201,12 @@ static enum dma_slave_buswidth dw_spi_dma_convert_width(u8 n_bytes)
return DMA_SLAVE_BUSWIDTH_UNDEFINED;
}
-static int dw_spi_dma_wait(struct dw_spi *dws, struct spi_transfer *xfer)
+static int dw_spi_dma_wait(struct dw_spi *dws, unsigned int len, u32 speed)
{
unsigned long long ms;
- ms = xfer->len * MSEC_PER_SEC * BITS_PER_BYTE;
- do_div(ms, xfer->effective_speed_hz);
+ ms = len * MSEC_PER_SEC * BITS_PER_BYTE;
+ do_div(ms, speed);
ms += ms + 200;
if (ms > UINT_MAX)
@@ -208,7 +232,7 @@ static inline bool dw_spi_dma_tx_busy(struct dw_spi *dws)
static int dw_spi_dma_wait_tx_done(struct dw_spi *dws,
struct spi_transfer *xfer)
{
- int retry = WAIT_RETRIES;
+ int retry = SPI_WAIT_RETRIES;
struct spi_delay delay;
u32 nents;
@@ -239,18 +263,12 @@ static void dw_spi_dma_tx_done(void *arg)
if (test_bit(RX_BUSY, &dws->dma_chan_busy))
return;
- dw_writel(dws, DW_SPI_DMACR, 0);
complete(&dws->dma_completion);
}
-static struct dma_async_tx_descriptor *
-dw_spi_dma_prepare_tx(struct dw_spi *dws, struct spi_transfer *xfer)
+static int dw_spi_dma_config_tx(struct dw_spi *dws)
{
struct dma_slave_config txconf;
- struct dma_async_tx_descriptor *txdesc;
-
- if (!xfer->tx_buf)
- return NULL;
memset(&txconf, 0, sizeof(txconf));
txconf.direction = DMA_MEM_TO_DEV;
@@ -260,20 +278,35 @@ dw_spi_dma_prepare_tx(struct dw_spi *dws, struct spi_transfer *xfer)
txconf.dst_addr_width = dw_spi_dma_convert_width(dws->n_bytes);
txconf.device_fc = false;
- dmaengine_slave_config(dws->txchan, &txconf);
+ return dmaengine_slave_config(dws->txchan, &txconf);
+}
- txdesc = dmaengine_prep_slave_sg(dws->txchan,
- xfer->tx_sg.sgl,
- xfer->tx_sg.nents,
- DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+static int dw_spi_dma_submit_tx(struct dw_spi *dws, struct scatterlist *sgl,
+ unsigned int nents)
+{
+ struct dma_async_tx_descriptor *txdesc;
+ dma_cookie_t cookie;
+ int ret;
+
+ txdesc = dmaengine_prep_slave_sg(dws->txchan, sgl, nents,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc)
- return NULL;
+ return -ENOMEM;
txdesc->callback = dw_spi_dma_tx_done;
txdesc->callback_param = dws;
- return txdesc;
+ cookie = dmaengine_submit(txdesc);
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dmaengine_terminate_sync(dws->txchan);
+ return ret;
+ }
+
+ set_bit(TX_BUSY, &dws->dma_chan_busy);
+
+ return 0;
}
static inline bool dw_spi_dma_rx_busy(struct dw_spi *dws)
@@ -283,7 +316,7 @@ static inline bool dw_spi_dma_rx_busy(struct dw_spi *dws)
static int dw_spi_dma_wait_rx_done(struct dw_spi *dws)
{
- int retry = WAIT_RETRIES;
+ int retry = SPI_WAIT_RETRIES;
struct spi_delay delay;
unsigned long ns, us;
u32 nents;
@@ -331,18 +364,12 @@ static void dw_spi_dma_rx_done(void *arg)
if (test_bit(TX_BUSY, &dws->dma_chan_busy))
return;
- dw_writel(dws, DW_SPI_DMACR, 0);
complete(&dws->dma_completion);
}
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
- struct spi_transfer *xfer)
+static int dw_spi_dma_config_rx(struct dw_spi *dws)
{
struct dma_slave_config rxconf;
- struct dma_async_tx_descriptor *rxdesc;
-
- if (!xfer->rx_buf)
- return NULL;
memset(&rxconf, 0, sizeof(rxconf));
rxconf.direction = DMA_DEV_TO_MEM;
@@ -352,50 +379,64 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
rxconf.src_addr_width = dw_spi_dma_convert_width(dws->n_bytes);
rxconf.device_fc = false;
- dmaengine_slave_config(dws->rxchan, &rxconf);
+ return dmaengine_slave_config(dws->rxchan, &rxconf);
+}
+
+static int dw_spi_dma_submit_rx(struct dw_spi *dws, struct scatterlist *sgl,
+ unsigned int nents)
+{
+ struct dma_async_tx_descriptor *rxdesc;
+ dma_cookie_t cookie;
+ int ret;
- rxdesc = dmaengine_prep_slave_sg(dws->rxchan,
- xfer->rx_sg.sgl,
- xfer->rx_sg.nents,
- DMA_DEV_TO_MEM,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ rxdesc = dmaengine_prep_slave_sg(dws->rxchan, sgl, nents,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!rxdesc)
- return NULL;
+ return -ENOMEM;
rxdesc->callback = dw_spi_dma_rx_done;
rxdesc->callback_param = dws;
- return rxdesc;
+ cookie = dmaengine_submit(rxdesc);
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dmaengine_terminate_sync(dws->rxchan);
+ return ret;
+ }
+
+ set_bit(RX_BUSY, &dws->dma_chan_busy);
+
+ return 0;
}
static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
{
- u16 imr = 0, dma_ctrl = 0;
+ u16 imr, dma_ctrl;
+ int ret;
- /*
- * Having a Rx DMA channel serviced with higher priority than a Tx DMA
- * channel might not be enough to provide a well balanced DMA-based
- * SPI transfer interface. There might still be moments when the Tx DMA
- * channel is occasionally handled faster than the Rx DMA channel.
- * That in its turn will eventually cause the SPI Rx FIFO overflow if
- * SPI bus speed is high enough to fill the SPI Rx FIFO in before it's
- * cleared by the Rx DMA channel. In order to fix the problem the Tx
- * DMA activity is intentionally slowed down by limiting the SPI Tx
- * FIFO depth with a value twice bigger than the Tx burst length
- * calculated earlier by the dw_spi_dma_maxburst_init() method.
- */
- dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1);
- dw_writel(dws, DW_SPI_DMATDLR, dws->txburst);
+ if (!xfer->tx_buf)
+ return -EINVAL;
+
+ /* Setup DMA channels */
+ ret = dw_spi_dma_config_tx(dws);
+ if (ret)
+ return ret;
- if (xfer->tx_buf)
- dma_ctrl |= SPI_DMA_TDMAE;
+ if (xfer->rx_buf) {
+ ret = dw_spi_dma_config_rx(dws);
+ if (ret)
+ return ret;
+ }
+
+ /* Set the DMA handshaking interface */
+ dma_ctrl = SPI_DMA_TDMAE;
if (xfer->rx_buf)
dma_ctrl |= SPI_DMA_RDMAE;
dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
/* Set the interrupt mask */
- if (xfer->tx_buf)
- imr |= SPI_INT_TXOI;
+ imr = SPI_INT_TXOI;
if (xfer->rx_buf)
imr |= SPI_INT_RXUI | SPI_INT_RXOI;
spi_umask_intr(dws, imr);
@@ -407,41 +448,166 @@ static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
return 0;
}
-static int dw_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
+static int dw_spi_dma_transfer_all(struct dw_spi *dws,
+ struct spi_transfer *xfer)
{
- struct dma_async_tx_descriptor *txdesc, *rxdesc;
int ret;
- /* Prepare the TX dma transfer */
- txdesc = dw_spi_dma_prepare_tx(dws, xfer);
+ /* Submit the DMA Tx transfer */
+ ret = dw_spi_dma_submit_tx(dws, xfer->tx_sg.sgl, xfer->tx_sg.nents);
+ if (ret)
+ goto err_clear_dmac;
- /* Prepare the RX dma transfer */
- rxdesc = dw_spi_dma_prepare_rx(dws, xfer);
+ /* Submit the DMA Rx transfer if required */
+ if (xfer->rx_buf) {
+ ret = dw_spi_dma_submit_rx(dws, xfer->rx_sg.sgl,
+ xfer->rx_sg.nents);
+ if (ret)
+ goto err_clear_dmac;
- /* rx must be started before tx due to spi instinct */
- if (rxdesc) {
- set_bit(RX_BUSY, &dws->dma_chan_busy);
- dmaengine_submit(rxdesc);
+ /* rx must be started before tx due to spi instinct */
dma_async_issue_pending(dws->rxchan);
}
- if (txdesc) {
- set_bit(TX_BUSY, &dws->dma_chan_busy);
- dmaengine_submit(txdesc);
+ dma_async_issue_pending(dws->txchan);
+
+ ret = dw_spi_dma_wait(dws, xfer->len, xfer->effective_speed_hz);
+
+err_clear_dmac:
+ dw_writel(dws, DW_SPI_DMACR, 0);
+
+ return ret;
+}
+
+/*
+ * In case if at least one of the requested DMA channels doesn't support the
+ * hardware accelerated SG list entries traverse, the DMA driver will most
+ * likely work that around by performing the IRQ-based SG list entries
+ * resubmission. That might and will cause a problem if the DMA Tx channel is
+ * recharged and re-executed before the Rx DMA channel. Due to
+ * non-deterministic IRQ-handler execution latency the DMA Tx channel will
+ * start pushing data to the SPI bus before the Rx DMA channel is even
+ * reinitialized with the next inbound SG list entry. By doing so the DMA Tx
+ * channel will implicitly start filling the DW APB SSI Rx FIFO up, which while
+ * the DMA Rx channel being recharged and re-executed will eventually be
+ * overflown.
+ *
+ * In order to solve the problem we have to feed the DMA engine with SG list
+ * entries one-by-one. It shall keep the DW APB SSI Tx and Rx FIFOs
+ * synchronized and prevent the Rx FIFO overflow. Since in general the tx_sg
+ * and rx_sg lists may have different number of entries of different lengths
+ * (though total length should match) let's virtually split the SG-lists to the
+ * set of DMA transfers, which length is a minimum of the ordered SG-entries
+ * lengths. An ASCII-sketch of the implemented algo is following:
+ * xfer->len
+ * |___________|
+ * tx_sg list: |___|____|__|
+ * rx_sg list: |_|____|____|
+ * DMA transfers: |_|_|__|_|__|
+ *
+ * Note in order to have this workaround solving the denoted problem the DMA
+ * engine driver should properly initialize the max_sg_burst capability and set
+ * the DMA device max segment size parameter with maximum data block size the
+ * DMA engine supports.
+ */
+
+static int dw_spi_dma_transfer_one(struct dw_spi *dws,
+ struct spi_transfer *xfer)
+{
+ struct scatterlist *tx_sg = NULL, *rx_sg = NULL, tx_tmp, rx_tmp;
+ unsigned int tx_len = 0, rx_len = 0;
+ unsigned int base, len;
+ int ret;
+
+ sg_init_table(&tx_tmp, 1);
+ sg_init_table(&rx_tmp, 1);
+
+ for (base = 0, len = 0; base < xfer->len; base += len) {
+ /* Fetch next Tx DMA data chunk */
+ if (!tx_len) {
+ tx_sg = !tx_sg ? &xfer->tx_sg.sgl[0] : sg_next(tx_sg);
+ sg_dma_address(&tx_tmp) = sg_dma_address(tx_sg);
+ tx_len = sg_dma_len(tx_sg);
+ }
+
+ /* Fetch next Rx DMA data chunk */
+ if (!rx_len) {
+ rx_sg = !rx_sg ? &xfer->rx_sg.sgl[0] : sg_next(rx_sg);
+ sg_dma_address(&rx_tmp) = sg_dma_address(rx_sg);
+ rx_len = sg_dma_len(rx_sg);
+ }
+
+ len = min(tx_len, rx_len);
+
+ sg_dma_len(&tx_tmp) = len;
+ sg_dma_len(&rx_tmp) = len;
+
+ /* Submit DMA Tx transfer */
+ ret = dw_spi_dma_submit_tx(dws, &tx_tmp, 1);
+ if (ret)
+ break;
+
+ /* Submit DMA Rx transfer */
+ ret = dw_spi_dma_submit_rx(dws, &rx_tmp, 1);
+ if (ret)
+ break;
+
+ /* Rx must be started before Tx due to SPI instinct */
+ dma_async_issue_pending(dws->rxchan);
+
dma_async_issue_pending(dws->txchan);
+
+ /*
+ * Here we only need to wait for the DMA transfer to be
+ * finished since SPI controller is kept enabled during the
+ * procedure this loop implements and there is no risk to lose
+ * data left in the Tx/Rx FIFOs.
+ */
+ ret = dw_spi_dma_wait(dws, len, xfer->effective_speed_hz);
+ if (ret)
+ break;
+
+ reinit_completion(&dws->dma_completion);
+
+ sg_dma_address(&tx_tmp) += len;
+ sg_dma_address(&rx_tmp) += len;
+ tx_len -= len;
+ rx_len -= len;
}
- ret = dw_spi_dma_wait(dws, xfer);
+ dw_writel(dws, DW_SPI_DMACR, 0);
+
+ return ret;
+}
+
+static int dw_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
+{
+ unsigned int nents;
+ int ret;
+
+ nents = max(xfer->tx_sg.nents, xfer->rx_sg.nents);
+
+ /*
+ * Execute normal DMA-based transfer (which submits the Rx and Tx SG
+ * lists directly to the DMA engine at once) if either full hardware
+ * accelerated SG list traverse is supported by both channels, or the
+ * Tx-only SPI transfer is requested, or the DMA engine is capable to
+ * handle both SG lists on hardware accelerated basis.
+ */
+ if (!dws->dma_sg_burst || !xfer->rx_buf || nents <= dws->dma_sg_burst)
+ ret = dw_spi_dma_transfer_all(dws, xfer);
+ else
+ ret = dw_spi_dma_transfer_one(dws, xfer);
if (ret)
return ret;
- if (txdesc && dws->master->cur_msg->status == -EINPROGRESS) {
+ if (dws->master->cur_msg->status == -EINPROGRESS) {
ret = dw_spi_dma_wait_tx_done(dws, xfer);
if (ret)
return ret;
}
- if (rxdesc && dws->master->cur_msg->status == -EINPROGRESS)
+ if (xfer->rx_buf && dws->master->cur_msg->status == -EINPROGRESS)
ret = dw_spi_dma_wait_rx_done(dws);
return ret;
@@ -457,8 +623,6 @@ static void dw_spi_dma_stop(struct dw_spi *dws)
dmaengine_terminate_sync(dws->rxchan);
clear_bit(RX_BUSY, &dws->dma_chan_busy);
}
-
- dw_writel(dws, DW_SPI_DMACR, 0);
}
static const struct dw_spi_dma_ops dw_spi_dma_mfld_ops = {