diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 97 |
1 files changed, 76 insertions, 21 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d5ab8d99739f..9a4bbccddc7f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -10,6 +10,7 @@ * Copyright (C) 2018-2020 Intel Corporation */ +#include <linux/ethtool.h> #include <linux/netdevice.h> #include <linux/debugfs.h> #include <linux/list.h> @@ -302,19 +303,6 @@ struct cfg80211_he_bss_color { }; /** - * struct ieee80211_he_bss_color - AP settings for BSS coloring - * - * @color: the current color. - * @disabled: is the feature disabled. - * @partial: define the AID equation. - */ -struct ieee80211_he_bss_color { - u8 color; - bool disabled; - bool partial; -}; - -/** * struct ieee80211_sta_ht_cap - STA's HT capabilities * * This structure describes most essential parameters needed @@ -1008,6 +996,21 @@ struct survey_info { * @sae_pwd: password for SAE authentication (for devices supporting SAE * offload) * @sae_pwd_len: length of SAE password (for devices supporting SAE offload) + * @sae_pwe: The mechanisms allowed for SAE PWE derivation: + * + * NL80211_SAE_PWE_UNSPECIFIED + * Not-specified, used to indicate userspace did not specify any + * preference. The driver should follow its internal policy in + * such a scenario. + * + * NL80211_SAE_PWE_HUNT_AND_PECK + * Allow hunting-and-pecking loop only + * + * NL80211_SAE_PWE_HASH_TO_ELEMENT + * Allow hash-to-element only + * + * NL80211_SAE_PWE_BOTH + * Allow either hunting-and-pecking loop or hash-to-element */ struct cfg80211_crypto_settings { u32 wpa_versions; @@ -1026,6 +1029,7 @@ struct cfg80211_crypto_settings { const u8 *psk; const u8 *sae_pwd; u8 sae_pwd_len; + enum nl80211_sae_pwe_mechanism sae_pwe; }; /** @@ -1170,6 +1174,7 @@ enum cfg80211_ap_settings_flags { * @vht_required: stations must support VHT * @twt_responder: Enable Target Wait Time * @he_required: stations must support HE + * @sae_h2e_required: stations must support direct H2E technique in SAE * @flags: flags, as defined in enum cfg80211_ap_settings_flags * @he_obss_pd: OBSS Packet Detection settings * @he_bss_color: BSS Color settings @@ -1201,7 +1206,7 @@ struct cfg80211_ap_settings { const struct ieee80211_vht_cap *vht_cap; const struct ieee80211_he_cap_elem *he_cap; const struct ieee80211_he_operation *he_oper; - bool ht_required, vht_required, he_required; + bool ht_required, vht_required, he_required, sae_h2e_required; bool twt_responder; u32 flags; struct ieee80211_he_obss_pd he_obss_pd; @@ -1727,6 +1732,54 @@ struct station_info { u8 connected_to_as; }; +/** + * struct cfg80211_sar_sub_specs - sub specs limit + * @power: power limitation in 0.25dbm + * @freq_range_index: index the power limitation applies to + */ +struct cfg80211_sar_sub_specs { + s32 power; + u32 freq_range_index; +}; + +/** + * struct cfg80211_sar_specs - sar limit specs + * @type: it's set with power in 0.25dbm or other types + * @num_sub_specs: number of sar sub specs + * @sub_specs: memory to hold the sar sub specs + */ +struct cfg80211_sar_specs { + enum nl80211_sar_type type; + u32 num_sub_specs; + struct cfg80211_sar_sub_specs sub_specs[]; +}; + + +/** + * @struct cfg80211_sar_chan_ranges - sar frequency ranges + * @start_freq: start range edge frequency + * @end_freq: end range edge frequency + */ +struct cfg80211_sar_freq_ranges { + u32 start_freq; + u32 end_freq; +}; + +/** + * struct cfg80211_sar_capa - sar limit capability + * @type: it's set via power in 0.25dbm or other types + * @num_freq_ranges: number of frequency ranges + * @freq_ranges: memory to hold the freq ranges. + * + * Note: WLAN driver may append new ranges or split an existing + * range to small ones and then append them. + */ +struct cfg80211_sar_capa { + enum nl80211_sar_type type; + u32 num_freq_ranges; + const struct cfg80211_sar_freq_ranges *freq_ranges; +}; + #if IS_ENABLED(CONFIG_CFG80211) /** * cfg80211_get_station - retrieve information about a given station @@ -3736,8 +3789,6 @@ struct mgmt_frame_regs { * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful * - * @set_wds_peer: set the WDS peer for a WDS interface - * * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting * functions to adjust rfkill hw state * @@ -4058,9 +4109,6 @@ struct cfg80211_ops { int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, int *dbm); - int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, - const u8 *addr); - void (*rfkill_poll)(struct wiphy *wiphy); #ifdef CONFIG_NL80211_TESTMODE @@ -4249,6 +4297,8 @@ struct cfg80211_ops { struct cfg80211_tid_config *tid_conf); int (*reset_tid_config)(struct wiphy *wiphy, struct net_device *dev, const u8 *peer, u8 tids); + int (*set_sar_specs)(struct wiphy *wiphy, + struct cfg80211_sar_specs *sar); }; /* @@ -5017,6 +5067,8 @@ struct wiphy { u8 max_data_retry_count; + const struct cfg80211_sar_capa *sar_capa; + char priv[] __aligned(NETDEV_ALIGN); }; @@ -6406,13 +6458,15 @@ void cfg80211_abandon_assoc(struct net_device *dev, struct cfg80211_bss *bss); * @dev: network device * @buf: 802.11 frame (header + body) * @len: length of the frame data + * @reconnect: immediate reconnect is desired (include the nl80211 attribute) * * This function is called whenever deauthentication has been processed in * station mode. This includes both received deauthentication frames and * locally generated ones. This function may sleep. The caller must hold the * corresponding wdev's mutex. */ -void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); +void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len, + bool reconnect); /** * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame @@ -7519,6 +7573,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev, * @dev: the device on which the channel switch started * @chandef: the future channel definition * @count: the number of TBTTs until the channel switch happens + * @quiet: whether or not immediate quiet was requested by the AP * * Inform the userspace about the channel switch that has just * started, so that it can take appropriate actions (eg. starting @@ -7526,7 +7581,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev, */ void cfg80211_ch_switch_started_notify(struct net_device *dev, struct cfg80211_chan_def *chandef, - u8 count); + u8 count, bool quiet); /** * ieee80211_operating_class_to_band - convert operating class to band |