summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/bpf/test_xsk.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/bpf/test_xsk.sh')
-rwxr-xr-xtools/testing/selftests/bpf/test_xsk.sh259
1 files changed, 259 insertions, 0 deletions
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
new file mode 100755
index 000000000000..88a7483eaae4
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -0,0 +1,259 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 Intel Corporation, Weqaar Janjua <weqaar.a.janjua@intel.com>
+
+# AF_XDP selftests based on veth
+#
+# End-to-end AF_XDP over Veth test
+#
+# Topology:
+# ---------
+# -----------
+# _ | Process | _
+# / ----------- \
+# / | \
+# / | \
+# ----------- | -----------
+# | Thread1 | | | Thread2 |
+# ----------- | -----------
+# | | |
+# ----------- | -----------
+# | xskX | | | xskY |
+# ----------- | -----------
+# | | |
+# ----------- | ----------
+# | vethX | --------- | vethY |
+# ----------- peer ----------
+# | | |
+# namespaceX | namespaceY
+#
+# AF_XDP is an address family optimized for high performance packet processing,
+# it is XDP’s user-space interface.
+#
+# An AF_XDP socket is linked to a single UMEM which is a region of virtual
+# contiguous memory, divided into equal-sized frames.
+#
+# Refer to AF_XDP Kernel Documentation for detailed information:
+# https://www.kernel.org/doc/html/latest/networking/af_xdp.html
+#
+# Prerequisites setup by script:
+#
+# Set up veth interfaces as per the topology shown ^^:
+# * setup two veth interfaces and one namespace
+# ** veth<xxxx> in root namespace
+# ** veth<yyyy> in af_xdp<xxxx> namespace
+# ** namespace af_xdp<xxxx>
+# * create a spec file veth.spec that includes this run-time configuration
+# *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
+# conflict with any existing interface
+# * tests the veth and xsk layers of the topology
+#
+# See the source xdpxceiver.c for information on each test
+#
+# Kernel configuration:
+# ---------------------
+# See "config" file for recommended kernel config options.
+#
+# Turn on XDP sockets and veth support when compiling i.e.
+# Networking support -->
+# Networking options -->
+# [ * ] XDP sockets
+#
+# Executing Tests:
+# ----------------
+# Must run with CAP_NET_ADMIN capability.
+#
+# Run (full color-coded output):
+# sudo ./test_xsk.sh -c
+#
+# If running from kselftests:
+# sudo make colorconsole=1 run_tests
+#
+# Run (full output without color-coding):
+# sudo ./test_xsk.sh
+
+. xsk_prereqs.sh
+
+while getopts c flag
+do
+ case "${flag}" in
+ c) colorconsole=1;;
+ esac
+done
+
+TEST_NAME="PREREQUISITES"
+
+URANDOM=/dev/urandom
+[ ! -e "${URANDOM}" ] && { echo "${URANDOM} not found. Skipping tests."; test_exit 1 1; }
+
+VETH0_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH0=ve${VETH0_POSTFIX}
+VETH1_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH1=ve${VETH1_POSTFIX}
+NS0=root
+NS1=af_xdp${VETH1_POSTFIX}
+MTU=1500
+
+setup_vethPairs() {
+ echo "setting up ${VETH0}: namespace: ${NS0}"
+ ip netns add ${NS1}
+ ip link add ${VETH0} type veth peer name ${VETH1}
+ if [ -f /proc/net/if_inet6 ]; then
+ echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6
+ fi
+ echo "setting up ${VETH1}: namespace: ${NS1}"
+ ip link set ${VETH1} netns ${NS1}
+ ip netns exec ${NS1} ip link set ${VETH1} mtu ${MTU}
+ ip link set ${VETH0} mtu ${MTU}
+ ip netns exec ${NS1} ip link set ${VETH1} up
+ ip link set ${VETH0} up
+}
+
+validate_root_exec
+validate_veth_support ${VETH0}
+validate_ip_utility
+setup_vethPairs
+
+retval=$?
+if [ $retval -ne 0 ]; then
+ test_status $retval "${TEST_NAME}"
+ cleanup_exit ${VETH0} ${VETH1} ${NS1}
+ exit $retval
+fi
+
+echo "${VETH0}:${VETH1},${NS1}" > ${SPECFILE}
+
+validate_veth_spec_file
+
+echo "Spec file created: ${SPECFILE}"
+
+test_status $retval "${TEST_NAME}"
+
+## START TESTS
+
+statusList=()
+
+### TEST 1
+TEST_NAME="XSK KSELFTEST FRAMEWORK"
+
+echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Generic mode"
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+retval=$?
+if [ $retval -eq 0 ]; then
+ echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Native mode"
+ vethXDPnative ${VETH0} ${VETH1} ${NS1}
+fi
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 2
+TEST_NAME="SKB NOPOLL"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 3
+TEST_NAME="SKB POLL"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-p")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 4
+TEST_NAME="DRV NOPOLL"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 5
+TEST_NAME="DRV POLL"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-p")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 6
+TEST_NAME="SKB SOCKET TEARDOWN"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-T")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 7
+TEST_NAME="DRV SOCKET TEARDOWN"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-T")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 8
+TEST_NAME="SKB BIDIRECTIONAL SOCKETS"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-B")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 9
+TEST_NAME="DRV BIDIRECTIONAL SOCKETS"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-B")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+## END TESTS
+
+cleanup_exit ${VETH0} ${VETH1} ${NS1}
+
+for _status in "${statusList[@]}"
+do
+ if [ $_status -ne 0 ]; then
+ test_exit $ksft_fail 0
+ fi
+done
+
+test_exit $ksft_pass 0