summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26Merge tag 'qcom-arm64-fixes-for-5.15-2' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DTS one more fix for 5.15 This reverts a clock change in the Qualcomm RB5 devicetree which in some combinations of firmware and configuration causes the device to crash during boot. Data on an adjacent platform indicates that this is probably not be the root cause of the problem, but this resolves the regression seen on RB5 and will allow the SM8250 platform to boot v5.15. * tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" Link: https://lore.kernel.org/r/20211025201213.1145348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-25Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for ↵Amit Pundir1-1/+2
sm8250 target" This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4. This upstream commit broke AOSP (post Android 12 merge) build on RB5. The device either silently crashes into USB crash mode after android boot animation or we see a blank blue screen with following dpu errors in dmesg: [ T444] hw recovery is not complete for ctl:3 [ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22 [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 [ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
2021-10-20Merge tag 'sunxi-fixes-for-5.15-1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Two patches to fix the GMAC PHY mode on some boards. * tag 'sunxi-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node Link: https://lore.kernel.org/r/d4c41c71-f1ff-4464-a26f-1bfd4b52fd78.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'imx-fixes-5.15-4' of ↵Arnd Bergmann2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.15, round 4: - A series from Frieder Schrempf to fix i.MX8MM Kontron N801x board on various aspects, voltage settings, GPIO polarity, SPI clock frequency and Ethernet PHY type. * tag 'imx-fixes-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2 arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct Link: https://lore.kernel.org/r/20211018000958.GC25810@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-16arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHYFrieder Schrempf1-1/+1
Previously we falsely relied on the PHY driver to unconditionally enable the internal RX delay. Since the following fix for the PHY driver this is not the case anymore: commit 7b005a1742be ("net: phy: mscc: configure both RX and TX internal delays for RGMII") In order to enable the delay we need to set the connection type to "rgmii-rxid". Without the RX delay the ethernet is not functional at all. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequencyFrieder Schrempf1-1/+1
The MCP2515 can be used with an SPI clock of up to 10 MHz. Set the limit accordingly to prevent any performance issues caused by the really low clock speed of 100 kHz. This removes the arbitrarily low limit on the SPI frequency, that was caused by a typo in the original dts. Without this change, receiving CAN messages on the board beyond a certain bitrate will cause overrun errors (see 'ip -det -stat link show can0'). With this fix, receiving messages on the bus works without any overrun errors for bitrates up to 1 MBit. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2Frieder Schrempf1-1/+3
The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet adapter deasserted anytime. Fix the polarity and mark it as always-on. Anyway, using the regulator is only a workaround for the missing support of specifying a reset GPIO for USB devices in a generic way. As we don't have a solution for this at the moment, at least fix the current workaround. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mVFrieder Schrempf1-1/+1
According to the datasheet the typical value for VDD_SNVS should be 800 mV, so let's make sure that this is within the range of the regulator. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correctFrieder Schrempf1-2/+4
It looks like the voltages for the SOC and DRAM supply weren't properly validated before. The datasheet and uboot-imx code tells us that VDD_SOC should be 800 mV in suspend and 850 mV in run mode. VDD_DRAM should be 950 mV for DDR clock frequencies of up to 1.5 GHz. Let's fix these values to make sure the voltages are within the required range. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-08Merge tag 'armsoc-fixes-5.15' of ↵Linus Torvalds25-145/+122
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a larger than normal update for Arm SoC specific code, most of it in device trees, but also drivers and the omap and at91/sama7 platforms: - There are four new entries to the MAINTAINERS file: Sven Peter and Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar, and Vignesh Raghavendra for TI K3 - Build fixes to address randconfig warnings in sharpsl, dove, omap1, and qcom platforms as well as the scmi and op-tee subsystems - Regression fixes for missing CONFIG_FB and other options for several defconfigs - Several bug fixes for the newly added Microchip SAMA7 platform, mostly regarding power management - Missing SMP barriers to protect accesses to SCMI virtio device - Regression fixes for TI OMAP, including a boot-time hang on am335x. - Lots of bug fixes for NXP i.MX, mostly addressing incorrect settings in devicetree files, and one revert for broken suspend. - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple of schema warnings. - Regression fixes for qualcomm SoC specific drivers and devicetree files, reverting an mdt_loader change and at least pastially reverting some of the 5.15 DTS changes, plus some minor bugfixes" * tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits) MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer firmware: arm_scmi: Add proper barriers to scmi virtio device firmware: arm_scmi: Simplify spinlocks in virtio transport ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 ARM: sharpsl_param: work around -Wstringop-overread warning ARM: defconfig: gemini: Restore framebuffer ARM: dove: mark 'putc' as inline ARM: omap1: move omap15xx local bus handling to usb.c MAINTAINERS: Add Vignesh to TI K3 platform maintainership arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence arm64: dts: ls1028a: fix eSDHC2 node arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail ...
2021-10-06Merge tag 'imx-fixes-5.15-2' of ↵Arnd Bergmann10-9/+12
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.15, round 2: - A couple of fixes from Haibo Chen to update SPI NOR TX bus width for i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver starts using the setting in DT. - Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the core supply being turned off unexpectedly. - Fix eSDHC2 device tree settings for LS1028A SoC. - Disable GIC CPU interface before calling stby-poweroff sequence to fix power-off failure on i.MX6. - Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards. * tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence arm64: dts: ls1028a: fix eSDHC2 node arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 arm64: dts: imx8: change the spi-nor tx ARM: dts: imx: change the spi-nor tx Link: https://lore.kernel.org/r/20211006125734.GA10197@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05Merge tag 'qcom-arm64-fixes-for-5.15' of ↵Arnd Bergmann7-19/+80
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DTS fixes for 5.15 This starts by reverting the SC7280 CPUfreq update, which was merged before concensus about the associated drivers changes was reached. It then moves the reserved-memory changes done to get IPA working on the Lenovo Yoga C630 into the Yoga specific DTS, as changing the memory map on the platform level did break a couple of the other boards. It fixes the HDMI audio on Trogdor and add missing Aggre2 NOC qos clocks on SDM6{30,36,60} which prevented some boards from booting. Lastly it enables the PON module on SM8250/QRB5165, as the lack thereof is blocking automated testing in LKFT. * tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sdm630: Add missing a2noc qos clocks arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes arm64: dts: qcom: pm8150: specify reboot mode magics arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node" Link: https://lore.kernel.org/r/20210930025509.1091-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-05arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpioTim Harvey2-2/+2
Fix invalid M2_RST# gpio pinmux. Fixes: ef484dfcf6f7 ("arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-04arm64: dts: ls1028a: fix eSDHC2 nodeMichael Walle1-2/+2
On the LS1028A this instance of the eSDHC controller is intended for either an eMMC or eSDIO card. It doesn't provide a card detect pin and its IO voltage is fixed at 1.8V. Remove the bogus broken-cd property, instead add the non-removable property. Fix the voltage-ranges property and set it to 1.8V only. Fixes: 491d3a3fc113 ("arm64: dts: ls1028a: Add esdhc node in dts") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-04arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2Heiko Thiery1-0/+1
The buck2 output of the PMIC is the VDD core voltage of the cpu. Switching off this will poweroff the CPU. Add the 'regulator-always-on' property to avoid this. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-04arm64: dts: imx8: change the spi-nor txHaibo Chen6-5/+7
Before commit 0e30f47232ab5 ("mtd: spi-nor: add support for DTR protocol"), for all PP command, it only support 1-1-1 mode, no matter the tx setting in dts. But after the upper commit, the logic change. It will choose the best mode(fastest mode) which flash device and spi-nor host controller both support. qspi and fspi host controller do not support read 1-4-4 mode. so need to set the tx to 1, let the common code finally select read 1-1-4 mode. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-26arm: dts: vexpress: Fix motherboard bus 'interrupt-map'Rob Herring1-45/+0
Commit 078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes") broke booting on a couple of 32-bit VExpress boards. The problem is #address-cells size changed, but interrupt-map was not updated. This results in the timer interrupt (and all the other motherboard interrupts) not getting mapped. As the 'interrupt-map' properties are all just duplicates across boards, just move them into vexpress-v2m.dtsi and vexpress-v2m-rs1.dtsi. Strictly speaking, 'interrupt-map' is dependent on the parent interrupt controller, but it's not likely we'll ever have a different parent than GICv2 on these old platforms. If there was one, 'interrupt-map' can still be overridden. Link: https://lore.kernel.org/r/20210924214221.1877686-1-robh@kernel.org Fixes: 078fb7aa6a83 ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes") Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Reported-by: Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-24arm64: dts: qcom: sdm630: Add missing a2noc qos clocksShawn Guo1-2/+13
It adds the missing a2noc clocks required for QoS registers programming per downstream kernel[1]. [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-bus.dtsi?h=LA.UM.8.2.r1-04800-sdm660.0#n43 Fixes: 045547a02252 ("arm64: dts: qcom: sdm630: Add interconnect provider nodes") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210824043435.23190-4-shawn.guo@linaro.org
2021-09-24arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodesDmitry Baryshkov1-0/+10
Enable powerkey and resin nodes to let the board handle POWER and Volume- keys properly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
2021-09-24arm64: dts: qcom: pm8150: specify reboot mode magicsDmitry Baryshkov1-0/+2
Specify recovery and bootloader magic values to be programmed by the qcom-pon driver. This allows the bootloader to handle reboot-to-bootloader functionality. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
2021-09-24arm64: dts: qcom: pm8150: use qcom,pm8998-pon bindingDmitry Baryshkov1-1/+1
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon in order to pass reboot mode properly. Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
2021-09-20arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMIStephen Boyd1-5/+4
This should be the dai for display port. Without this set properly we fail to get audio routed through external displays on trogdor. It looks like we picked up v4[1] of this patch when there was a v7[2]. The v7 patch still had the wrong sound-dai but at least we can fix all this up and audio works. Cc: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Fixes: b22d313e1772 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI") Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com [1] Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org
2021-09-20arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappingsAmit Pundir2-8/+47
Upstream commit 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") shuffled reserved memory regions in sdm845.dtsi to make firmware loading succeed and enable the ipa device on sdm845-yoga but it broke the other common users of those memory regions like Xiaomi Pocophone F1. So this patch effectively revert those upstream commit changes and move all the relevant changes to sdm850-lenovo-yoga-c630.dts instead. Fixes: 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org
2021-09-17arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodesRob Herring7-48/+26
The 'motherboard-bus' node in Arm Ltd boards fails schema checks as 'simple-bus' child nodes must have a unit-address. The 'ranges' handling is also wrong (or at least strange) as the mapping of SMC chip selects should be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus' node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges' should be moved down a level. The latter change is more simple, so let's do that. As the 'ranges' value doesn't vary for a given motherboard instance, we can move 'ranges' into the motherboard dtsi files. Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-14arm: dts: vexpress: Drop unused properties from motherboard nodeRob Herring3-6/+0
Drop the '#interrupt-cells' property in the motherboard node which has no effect as the node is neither an interrupt-controller or interrupt-map (that's in the parent node). Drop 'model' as it is not used by software nor documented. Drop 'arm,v2m-memory-map' as it is not used by software. The purpose was to describe which memory map, but that's all described by the DT already. Link: https://lore.kernel.org/r/20210819184239.1192395-4-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-14arm64: dts: arm: drop unused interrupt-names in MHUKrzysztof Kozlowski1-2/+0
The arm,mhu bindings and driver do not define interrupt-names, so drop the property to fix warnings: arch/arm64/boot/dts/arm/juno-r2.dt.yaml: mhu@2b1f0000: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20210820081733.83976-3-krzysztof.kozlowski@canonical.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-14arm64: dts: arm: align watchdog and mmc node names with dtschemaKrzysztof Kozlowski2-4/+4
Align the watchdog and mmc device node names with the schema to fix warnings like: mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$' wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$' Link: https://lore.kernel.org/r/20210820081733.83976-1-krzysztof.kozlowski@canonical.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-14arm64: dts: qcom: ipq8074: remove USB tx-fifo-resize propertyRobert Marko1-2/+0
tx-fifo-resize is now added by default by the dwc3-qcom driver to the SNPS DWC3 child node. So, lets drop the tx-fifo-resize property from dwc3-qcom nodes as having it there will cause the dwc3-qcom driver to error and abort probe with: [ 1.362938] dwc3-qcom 8af8800.usb: unable to add property [ 1.368405] dwc3-qcom 8af8800.usb: failed to register DWC3 Core, err=-17 Fixes: cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default") Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-13Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"Douglas Anderson1-3/+3
This reverts commit 11e03d692101e484df9322f892a8b6e111a82bfd. As per discussion [1] the patch shouldn't have landed. Let's revert. [1] https://lore.kernel.org/r/fde7bac239f796b039b9be58b391fb77@codeaurora.org/ Fixes: 11e03d692101 ("arm64: dts: qcom: sc7280: Fixup the cpufreq node") Reported-by: Matthias Kaehlcke <mka@chromium.org> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210907121220.1.I08460f490473b70de0d768db45f030a4d5c17828@changeid
2021-09-13arm64: dts: fvp: Remove panel timingsRobin Murphy1-12/+0
The simple-panel driver already has hard-coded timings for "arm,rtsm-display", and as such screams at us for trying to override a fixed mode from DT. Since the exact values probably don't matter all that much anyway, just remove the DT node to keep boot quiet. Link: https://lore.kernel.org/r/2701c187cf8e0762df38f68cc069ec2c29a3b5a9.1626283322.git.robin.murphy@arm.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-13arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet nodeClément Bœsch1-1/+1
RX and TX delay are provided by ethernet PHY. Reflect that in ethernet node. Fixes: 44a94c7ef989 ("arm64: dts: allwinner: H5: Restore EMAC changes") Signed-off-by: Clément Bœsch <u@pkh.me> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210905002027.171984-1-u@pkh.me
2021-09-03Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds2-1121/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-09-02Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds168-2124/+13268
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-09-02Merge tag 'arm64-upstream' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for 32-bit tasks on asymmetric AArch32 systems (on top of the scheduler changes merged via the tip tree). - More entry.S clean-ups and conversion to C. - MTE updates: allow a preferred tag checking mode to be set per CPU (the overhead of synchronous mode is smaller for some CPUs than others); optimisations for kernel entry/exit path; optionally disable MTE on the kernel command line. - Kselftest improvements for SVE and signal handling, PtrAuth. - Fix unlikely race where a TLBI could use stale ASID on an ASID roll-over (found by inspection). - Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher exception levels; drop unnecessary sigdelsetmask() call in the signal32 handling; remove BUG_ON when failing to allocate SVE state (just signal the process); SYM_CODE annotations. - Other trivial clean-ups: use macros instead of magic numbers, remove redundant returns, typos. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits) arm64: Do not trap PMSNEVFR_EL1 arm64: mm: fix comment typo of pud_offset_phys() arm64: signal32: Drop pointless call to sigdelsetmask() arm64/sve: Better handle failure to allocate SVE register storage arm64: Document the requirement for SCR_EL3.HCE arm64: head: avoid over-mapping in map_memory arm64/sve: Add a comment documenting the binutils needed for SVE asm arm64/sve: Add some comments for sve_save/load_state() kselftest/arm64: signal: Add a TODO list for signal handling tests kselftest/arm64: signal: Add test case for SVE register state in signals kselftest/arm64: signal: Verify that signals can't change the SVE vector length kselftest/arm64: signal: Check SVE signal frame shows expected vector length kselftest/arm64: signal: Support signal frames with SVE register data kselftest/arm64: signal: Add SVE to the set of features we can check for arm64: replace in_irq() with in_hardirq() kselftest/arm64: pac: Fix skipping of tests on systems without PAC Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs ...
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-15/+15
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-09-01Merge tag 'usb-5.15-rc1' of ↵Linus Torvalds2-0/+203
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.15-rc1. Nothing huge in here, just lots of constant forward progress on a number of different drivers and hardware support: - more USB 4/Thunderbolt support added - dwc3 driver updates and additions - usb gadget fixes and addtions for new types - udc gadget driver updates - host controller updates - removal of obsolete drivers - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: isp1760: otg control register access usb: isp1760: use the right irq status bit usb: isp1760: write to status and address register usb: isp1760: fix qtd fill length usb: isp1760: fix memory pool initialization usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least" usb: dwc2: Fix spelling mistake "was't" -> "wasn't" usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed" usb: host: xhci-rcar: Don't reload firmware after the completion usb: xhci-mtk: allow bandwidth table rollover usb: mtu3: fix random remote wakeup usb: mtu3: return successful suspend status usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint usb: xhci-mtk: modify the SOF/ITP interval for mt8195 usb: xhci-mtk: add a member of num_esit usb: xhci-mtk: check boundary before check tt usb: xhci-mtk: update fs bus bandwidth by bw_budget_table usb: xhci-mtk: fix issue of out-of-bounds array access usb: xhci-mtk: support option to disable usb2 ports usb: xhci-mtk: fix use-after-free of mtk->hcd ...
2021-09-01Merge tag 'net-next-5.15' of ↵Linus Torvalds4-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge remote-tracking branch 'tip/sched/arm64' into for-next/coreCatalin Marinas5-9/+62
* tip/sched/arm64: (785 commits) Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0 arm64: Implement task_cpu_possible_mask() sched: Introduce dl_task_check_affinity() to check proposed affinity sched: Allow task CPU affinity to be restricted on asymmetric systems sched: Split the guts of sched_setaffinity() into a helper function sched: Introduce task_struct::user_cpus_ptr to track requested affinity sched: Reject CPU affinity changes based on task_cpu_possible_mask() cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq() cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus() cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1 sched: Introduce task_cpu_possible_mask() to limit fallback rq selection sched: Cgroup SCHED_IDLE support sched/topology: Skip updating masks for non-online nodes Linux 5.14-rc6 lib: use PFN_PHYS() in devmem_is_allowed() ...
2021-08-30Merge back new PM domains material for v5.15.Rafael J. Wysocki1-0/+24
2021-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-5/+21
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26arm/arm64: dts: Fix remaining dtc 'unit_address_format' warningsRob Herring3-3/+3
Fix all the remaining dtc 'unit_address_format' warnings except for the ones related to 'register-bit-led'. For those, we need to decide on and document the node name. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210823165126.2320910-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-24Merge 5.14-rc7 into usb-nextGreg Kroah-Hartman5-5/+21
We need the USB fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-20arm64: dts: sparx5: Add the Sparx5 switch frame DMA supportSteen Hegelund1-2/+3
This adds the interrupt for the Sparx5 Frame DMA. If this configuration is present the Sparx5 SwitchDev driver will use the Frame DMA feature, and if not it will use register based injection and extraction for sending and receiving frames to the CPU. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18Merge tag 'mvebu-dt64-5.15-1' of ↵Arnd Bergmann17-805/+1267
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 5.15 (part 1) - DTS updates for Marvell Armada CN913x platforms + Add support for Armada CN913x Development Board topology "B" + Add support for Armada CN913x Reference Design boards (CRB) + Fixes the NAND partitioning scheme in DTS eliminating gap between consecutive partitions + Fix 10Gb ports PHY mode names - Extend PCIe MEM space on Armada 37xx: useful for some combination of PCIe cards where the initial 16MB was not enough * tag 'mvebu-dt64-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: armada-37xx: Extend PCIe MEM space arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada arm64: dts: add support for Marvell cn9130-crb platform dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards arm64: dts: cn913x: add device trees for topology B boards Link: https://lore.kernel.org/r/878s10ypxe.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'hisi-arm64-dt-for-5.15' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann1-1/+1
into arm/dt ARM64: DT: HiSilicon ARM64 DT updates for 5.15 - Address a PCI bus range warning of the hi3660 SoC * tag 'hisi-arm64-dt-for-5.15' of git://github.com/hisilicon/linux-hisi: arm64: dts: HiSilicon: hi3660: address a PCI warning Link: https://lore.kernel.org/r/611B9BE9.8050904@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'sunxi-dt-for-5.15-1' of ↵Arnd Bergmann1-2/+25
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual round of DT patches for the 5.15 merge window, with some Tanix TX6 improvements this time. * tag 'sunxi-dt-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: tanix-tx6: enable emmc arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names Link: https://lore.kernel.org/r/39cd7be5-a9a7-42b6-bc29-f895b9a3448a.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'qcom-arm64-for-5.15' of ↵Arnd Bergmann58-892/+6749
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 updates for v5.15 SDM660 and SDM630 was concluded to be similar enough that they should be merged, and the derivative SDM636 was added to the bunch. The combined platform gained support for GPU, DMA, I2C, IMEM, display, power-domains, SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The Sony Xperia "Ganges" platform was similarly merged with "Nile", got cleaned up and gained touchscreen, USB, volume keys and uSD support. IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074 gains SCM, PRNG and Crypto support and a DT style update of the PCIe nodes. MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced, with touchscreen, notification LED and IMU support. MSM8996 gains support for GPU cooling and v3.0 of the SoC, which is used to introduce support for the Sony Xperia X Performance, XZ and XZs phones. SC7180 finally gains DisplayPort support and LPASS is updated accordingly. A number of fixes are introduced and with the newly introduced DRM aux bus in place Trogdor's panel is moved under the eDP bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the new IDP2 board was added. SM6126 (aka Snapdragon 665) was introduced, together with the Sony Xperia 10II phone with support for framebuffer, USB, eMMC and volume keys. SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was introduced to scale DDR and L3 frequencies and SPI nodes where added, in addition to a number of smaller fixes. SM8250 gained a number of minor fixes and had its serial engines wired up to use the GENI wrappers' DMA engines. SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was introduced. SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled and now has working LTE connectivity. Additionally a number of minor fixes throughout to correct DT validation warnings. Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by the USB maintainer deciding to fix a regression in his tree. * tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (114 commits) arm64: dts: qcom: sm8250: assign DSI clock source parents arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents arm64: dts: qcom: sdm845: assign DSI clock source parents arm64: dts: qcom: sc7180: assign DSI clock source parents arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2 dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board arm64: dts: qcom: sm8350: fix IPA interconnects arm64: dts: qcom: sc7180: define ipa_fw_mem node arm64: dts: qcom: sc7280: enable IPA for sc7280-idp arm64: dts: qcom: sc7280: add IPA information arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip arm64: dts: qcom: ipq8074: add PRNG node arm64: dts: qcom: ipq8074: add crypto nodes arm64: dts: qcom: sm8350: add qupv3_id_1/i2c13 nodes arm64: dts: qcom: ipq6018: Add pcie support arm64: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster arm64: dts: qcom: sm8150: add SPI nodes arm64: dts: qcom: msm8916: Enable CoreSight STM component arm64: dts: qcom: sc7280: Add qfprom node arm64: dts: qcom: sc7280: Fixup the cpufreq node ... Link: https://lore.kernel.org/r/20210816231223.586597-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17arm64: dts: marvell: armada-37xx: Extend PCIe MEM spacePali Rohár2-2/+26
Current PCIe MEM space of size 16 MB is not enough for some combination of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted Firmware for Armada 3700 platform already assigns 128 MB for PCIe window, so extend PCIe MEM space to the end of 128 MB PCIe window which allows to allocate more PCIe BARs for more PCIe cards. Without this change some combination of PCIe cards cannot be used and kernel show error messages in dmesg during initialization: pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref] pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000] pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000] pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000] pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000] pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit] pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit] Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot crashes during loading of kernel DTB file. This bug is present only in U-Boot code for Turris Mox and therefore other Armada 3700 devices are not affected by this bug. Bug is fixed in U-Boot version 2021.07. To not break booting new kernels on existing versions of U-Boot on Turris Mox, use first 16 MB range for IO and second range with rest of PCIe window for MEM. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-08-17Merge tag 'v5.14-rc3' into arm64-for-5.15Bjorn Andersson12-19/+32
The USB maintainer felt the strong need to push '1f958f3dff42 ("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")' through the usb tree, so merge v5.14-rc3 to resolve the resulting merge conflicts. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-17Merge tag 'qcom-arm64-fixes-for-5.14' of ↵Arnd Bergmann5-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 fixes for v5.14 This fixes three regressions across Angler and Bullhead, introduced by advancements in the platform definition. It then corrects the powerdown GPIOs for the speaker amps on C630 and lastly fixes a typo that assigned CPU7 in SC7280 to the wrong CPUfreq domain. * tag 'qcom-arm64-fixes-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sdm845-oneplus: fix reserved-mem arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7 arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping arm64: dts: qcom: msm8992-bullhead: Remove PSCI arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x Link: https://lore.kernel.org/r/20210816205030.576348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-12 13:47:14 +0300