summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2022-04-27block/compat_ioctl: fix range check in BLKGETSIZEKhazhismel Kumykov1-1/+1
commit ccf16413e520164eb718cf8b22a30438da80ff23 upstream. kernel ulong and compat_ulong_t may not be same width. Use type directly to eliminate mismatches. This would result in truncation rather than EFBIG for 32bit mode for large disks. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27block: simplify the block device syncing codeChristoph Hellwig1-3/+14
[ Upstream commit 1e03a36bdff4709c1bbf0f57f60ae3f776d51adf ] Get rid of the indirections and just provide a sync_bdevs helper for the generic sync code. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211019062530.2174626-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27block: remove __sync_blockdevChristoph Hellwig1-5/+6
[ Upstream commit 70164eb6ccb76ab679b016b4b60123bf4ec6c162 ] Instead offer a new sync_blockdev_nowait helper for the !wait case. This new helper is exported as it will grow modular callers in a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211019062530.2174626-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20block: fix offset/size check in bio_trim()Ming Lei1-1/+1
[ Upstream commit 8535c0185d14ea41f0efd6a357961b05daf6687e ] Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size is sector. Fix the above issue in checking offset/size in bio_trim(). Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()") Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08block: Fix the maximum minor value is blk_alloc_ext_minor()Christophe JAILLET1-1/+1
commit d1868328dec5ae2cf210111025fcbc71f78dd5ca upstream. ida_alloc_range(..., min, max, ...) returns values from min to max, inclusive. So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor(). This is an issue because in device_add_disk(), this value is used in: ddev->devt = MKDEV(disk->major, disk->first_minor); and NR_EXT_DEVT is '(1 << MINORBITS)'. So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow. Fixes: 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/cc17199798312406b90834e433d2cefe8266823d.1648306232.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08Revert "Revert "block, bfq: honor already-setup queue merges""Paolo Valente1-3/+13
[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ] A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08bfq: fix use-after-free in bfq_dispatch_requestZhang Wensheng1-7/+8
[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ] KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x60 [69832.323942] process_one_work+0x6d4/0xfe0 [69832.324772] worker_thread+0x91/0xc80 [69832.325518] kthread+0x32d/0x3f0 [69832.326205] ret_from_fork+0x1f/0x30 [69832.326932] [69832.338297] The buggy address belongs to the object at ffff88802622b968 [69832.338297] which belongs to the cache bfq_queue of size 512 [69832.340766] The buggy address is located 288 bytes inside of [69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68) [69832.343091] The buggy address belongs to the page: [69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228 [69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0 [69832.347719] flags: 0x1fffff80010200(slab|head) [69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840 [69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000 [69832.356547] page dumped because: kasan: bad access detected [69832.357652] [69832.357970] Memory state around the buggy address: [69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.363273] ^ [69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc [69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69832.377405] ================================================================== In bfq_dispatch_requestfunction, it may have function call: bfq_dispatch_request __bfq_dispatch_request bfq_select_queue bfq_bfqq_expire __bfq_bfqd_reset_in_service bfq_put_queue kmem_cache_free In this function call, in_serv_queue has beed expired and meet the conditions to free. In the function bfq_dispatch_request, the address of in_serv_queue pointing to has been released. For getting the value of idle_timer_disabled, it will get flags value from the address which in_serv_queue pointing to, then the problem of use-after-free happens; Fix the problem by check in_serv_queue == bfqd->in_service_queue, to get the value of idle_timer_disabled if in_serve_queue is equel to bfqd->in_service_queue. If the space of in_serv_queue pointing has been released, this judge will aviod use-after-free problem. And if in_serv_queue may be expired or finished, the idle_timer_disabled will be false which would not give effects to bfq_update_dispatch_stats. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08block, bfq: don't move oom_bfqqYu Kuai1-0/+6
[ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ] Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [ 2073.020411] page dumped because: kasan: bad access detected [ 2073.020412] [ 2073.020414] Memory state around the buggy address: [ 2073.020420] ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020424] ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020430] ^ [ 2073.020434] ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020438] ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2073.020439] ================================================================== The same problem exist in mainline as well. This is because oom_bfqq is moved to a non-root group, thus root_group is freed earlier. Thus fix the problem by don't move oom_bfqq. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220129015924.3958918-4-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08block/bfq_wf2q: correct weight to ioprioYahu Gao1-1/+1
[ Upstream commit bcd2be763252f3a4d5fc4d6008d4d96c601ee74b ] The return value is ioprio * BFQ_WEIGHT_CONVERSION_COEFF or 0. What we want is ioprio or 0. Correct this by changing the calculation. Signed-off-by: Yahu Gao <gaoyahu19@gmail.com> Acked-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20220107065859.25689-1-gaoyahu19@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08block: don't delete queue kobject before its childrenEric Biggers1-3/+5
[ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ] kobjects aren't supposed to be deleted before their child kobjects are deleted. Apparently this is usually benign; however, a WARN will be triggered if one of the child kobjects has a named attribute group: sysfs group 'modes' not found for kobject 'crypto' WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80 ... Call Trace: sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312 __kobject_del+0x20/0x80 lib/kobject.c:611 kobject_cleanup+0xa4/0x140 lib/kobject.c:696 kobject_release lib/kobject.c:736 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x53/0x70 lib/kobject.c:753 blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159 blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962 del_gendisk+0x117/0x250 block/genhd.c:610 Fix this by moving the kobject_del() and the corresponding kobject_uevent() to the correct place. Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()") Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08blk-cgroup: set blkg iostat after percpu stat aggregationChengming Zhou1-5/+5
[ Upstream commit f122d103b564e5fb7c82de902c6f8f6cbdf50ec9 ] Don't need to do blkg_iostat_set for top blkg iostat on each CPU, so move it after percpu stat aggregation. Fixes: ef45fe470e1e ("blk-cgroup: show global disk stats in root cgroup io.stat") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220213085902.88884-1-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08block: don't merge across cgroup boundaries if blkcg is enabledTejun Heo1-0/+11
commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream. blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't disable merges across different cgroups. This obviously can lead to accounting and control errors but more importantly to priority inversions - e.g. an IO which belongs to a higher priority cgroup or IO class may end up getting throttled incorrectly because it gets merged to an IO issued from a low priority cgroup. Fix it by adding blk_cgroup_mergeable() which is called from merge paths and rejects cross-cgroup and cross-issue_as_root merges. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: d70675121546 ("block: introduce blk-iolatency io controller") Cc: stable@vger.kernel.org # v4.19+ Cc: Josef Bacik <jbacik@fb.com> Link: https://lore.kernel.org/r/Yi/eE/6zFNyWJ+qd@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08block: limit request dispatch loop durationShin'ichiro Kawasaki1-1/+8
commit 572299f03afd676dd4e20669cdaf5ed0fe1379d4 upstream. When IO requests are made continuously and the target block device handles requests faster than request arrival, the request dispatch loop keeps on repeating to dispatch the arriving requests very long time, more than a minute. Since the loop runs as a workqueue worker task, the very long loop duration triggers workqueue watchdog timeout and BUG [1]. To avoid the very long loop duration, break the loop periodically. When opportunity to dispatch requests still exists, check need_resched(). If need_resched() returns true, the dispatch loop already consumed its time slice, then reschedule the dispatch work and break the loop. With heavy IO load, need_resched() does not return true for 20~30 seconds. To cover such case, check time spent in the dispatch loop with jiffies. If more than 1 second is spent, reschedule the dispatch work and break the loop. [1] [ 609.691437] BUG: workqueue lockup - pool cpus=10 node=1 flags=0x0 nice=-20 stuck for 35s! [ 609.701820] Showing busy workqueues and worker pools: [ 609.707915] workqueue events: flags=0x0 [ 609.712615] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 [ 609.712626] pending: drm_fb_helper_damage_work [drm_kms_helper] [ 609.712687] workqueue events_freezable: flags=0x4 [ 609.732943] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 [ 609.732952] pending: pci_pme_list_scan [ 609.732968] workqueue events_power_efficient: flags=0x80 [ 609.751947] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 [ 609.751955] pending: neigh_managed_work [ 609.752018] workqueue kblockd: flags=0x18 [ 609.769480] pwq 21: cpus=10 node=1 flags=0x0 nice=-20 active=3/256 refcnt=4 [ 609.769488] in-flight: 1020:blk_mq_run_work_fn [ 609.769498] pending: blk_mq_timeout_work, blk_mq_run_work_fn [ 609.769744] pool 21: cpus=10 node=1 flags=0x0 nice=-20 hung=35s workers=2 idle: 67 [ 639.899730] BUG: workqueue lockup - pool cpus=10 node=1 flags=0x0 nice=-20 stuck for 66s! [ 639.909513] Showing busy workqueues and worker pools: [ 639.915404] workqueue events: flags=0x0 [ 639.920197] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 [ 639.920215] pending: drm_fb_helper_damage_work [drm_kms_helper] [ 639.920365] workqueue kblockd: flags=0x18 [ 639.939932] pwq 21: cpus=10 node=1 flags=0x0 nice=-20 active=3/256 refcnt=4 [ 639.939942] in-flight: 1020:blk_mq_run_work_fn [ 639.939955] pending: blk_mq_timeout_work, blk_mq_run_work_fn [ 639.940212] pool 21: cpus=10 node=1 flags=0x0 nice=-20 hung=66s workers=2 idle: 67 Fixes: 6e6fcbc27e778 ("blk-mq: support batching dispatch in case of io") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/linux-block/20220310091649.zypaem5lkyfadymg@shindev/ Link: https://lore.kernel.org/r/20220318022641.133484-1-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23block: release rq qos structures for queue without diskMing Lei1-0/+4
commit daaca3522a8e67c46e39ef09c1d542e866f85f3b upstream. blkcg_init_queue() may add rq qos structures to request queue, previously blk_cleanup_queue() calls rq_qos_exit() to release them, but commit 8e141f9eb803 ("block: drain file system I/O on del_gendisk") moves rq_qos_exit() into del_gendisk(), so memory leak is caused because queues may not have disk, such as un-present scsi luns, nvme admin queue, ... Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back. BTW, v5.18 won't need this patch any more since we move blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release handler, and patches have been in for-5.18/block. Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: syzbot+b42749a851a47a0f581b@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220314043018.177141-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16block: drop unused includes in <linux/genhd.h>Christoph Hellwig3-0/+3
commit b81e0c2372e65e5627864ba034433b64b2fc73f5 upstream. Drop various include not actually used in genhd.h itself, and move the remaning includes closer together. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>a Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: "Maciej W. Rozycki" <macro@orcam.me.uk> [ resolves MIPS build failure by luck, root cause needs to be fixed in Linus's tree properly, but this is needed for now to fix the build - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kernHaimin Zhang1-1/+1
[ Upstream commit cc8f7fe1f5eab010191aa4570f27641876fa1267 ] Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize the buffer of a bio. Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220216084038.15635-1-tcs.kernel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23block: fix surprise removal for drivers calling blk_set_queue_dyingChristoph Hellwig2-8/+16
commit 7a5428dcb7902700b830e912feee4e845df7c019 upstream. Various block drivers call blk_set_queue_dying to mark a disk as dead due to surprise removal events, but since commit 8e141f9eb803 that doesn't work given that the GD_DEAD flag needs to be set to stop I/O. Replace the driver calls to blk_set_queue_dying with a new (and properly documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the only remaining caller. Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23block/wbt: fix negative inflight counter when remove scsi deviceLaibin Qiu2-2/+2
commit e92bc4cd34de2ce454bdea8cd198b8067ee4e123 upstream. Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in wbt_disable_default() when switch elevator to bfq. And when we remove scsi device, wbt will be enabled by wbt_enable_default. If it become false positive between wbt_wait() and wbt_track() when submit write request. The following is the scenario that triggered the problem. T1 T2 T3 elevator_switch_mq bfq_init_queue wbt_disable_default <= Set rwb->enable_state (OFF) Submit_bio blk_mq_make_request rq_qos_throttle <= rwb->enable_state (OFF) scsi_remove_device sd_remove del_gendisk blk_unregister_queue elv_unregister_queue wbt_enable_default <= Set rwb->enable_state (ON) q_qos_track <= rwb->enable_state (ON) ^^^^^^ this request will mark WBT_TRACKED without inflight add and will lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung. Fix this by move wbt_enable_default() from elv_unregister to bfq_exit_queue(). Only re-enable wbt when bfq exit. Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly") Remove oneline stale comment, and kill one oneshot local variable. Signed-off-by: Ming Lei <ming.lei@rehdat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/linux-block/20211214133103.551813-1-qiulaibin@huawei.com/ Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08block: bio-integrity: Advance seed correctly for larger interval sizesMartin K. Petersen1-1/+1
commit b13e0c71856817fca67159b11abac350e41289f5 upstream. Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks. The seed value should be advanced by bio_integrity_intervals() and not the number of sectors. Cc: Dmitry Monakhov <dmonakhov@openvz.org> Cc: stable@vger.kernel.org Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") Tested-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com> Reported-by: Alexey Lyashkov <alexey.lyashkov@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01block: Fix wrong offset in bio_truncate()OGAWA Hirofumi1-1/+2
commit 3ee859e384d453d6ac68bfd5971f630d9fa46ad3 upstream. bio_truncate() clears the buffer outside of last block of bdev, however current bio_truncate() is using the wrong offset of page. So it can return the uninitialized data. This happened when both of truncated/corrupted FS and userspace (via bdev) are trying to read the last of bdev. Reported-by: syzbot+ac94ae5f68b84197f41c@syzkaller.appspotmail.com Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/875yqt1c9g.fsf@mail.parknet.co.jp Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01block: add bio_start_io_acct_time() to control start_timeMike Snitzer1-6/+19
commit e45c47d1f94e0cc7b6b079fdb4bcce2995e2adc4 upstream. bio_start_io_acct_time() interface is like bio_start_io_acct() that allows start_time to be passed in. This gives drivers the ability to defer starting accounting until after IO is issued (but possibily not entirely due to bio splitting). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220128155841.39644-2-snitzer@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27block: Fix fsync always failed if once failedYe Bin1-1/+3
commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream. We do test with inject error fault base on v4.19, after test some time we found sync /dev/sda always failed. [root@localhost] sync /dev/sda sync: error syncing '/dev/sda': Input/output error scsi log as follows: [19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b [19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK [19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0 [19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0) [19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes [19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done. [19069.812564] print_req_error: I/O error, dev sda, sector 0 ftrace log as follows: rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep] rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep] kworker/7:1H-250 [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H] <idle>-0 [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0] <idle>-0 [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5] As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq' reference count isn't zero. If flush request once failed and record error code in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync will always failed. To address this issue reset 'fq->rq_status' after return error code to upper layer. Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211129012659.1553733-1-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27block: fix async_depth sysfs interface for mq-deadlineJens Axboe1-2/+2
commit 46cdc45acb089c811d9a54fd50af33b96e5fae9d upstream. A previous commit added this feature, but it inadvertently used the wrong variable to show/store the setting from/to, victimized by copy/paste. Fix it up so that the async_depth sysfs interface reads and writes from the right setting. Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485 Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27block: check minor range in device_add_disk()Tetsuo Handa1-0/+2
[ Upstream commit e338924bd05d6e71574bc13e310c89e10e49a8a5 ] ioctl(fd, LOOP_CTL_ADD, 1048576) causes sysfs: cannot create duplicate filename '/dev/block/7:0' message because such request is treated as if ioctl(fd, LOOP_CTL_ADD, 0) due to MINORMASK == 1048575. Verify that all minor numbers for that device fit in the minor range. Reported-by: wangyangbo <wangyangbo@uniontech.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/b1b19379-23ee-5379-0eb5-94bf5f79f1b4@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27scsi: block: pm: Always set request queue runtime active in ↵Alan Stern1-15/+7
blk_post_runtime_resume() [ Upstream commit 6e1fcab00a23f7fe9f4fe9704905a790efa1eeab ] John Garry reported a deadlock that occurs when trying to access a runtime-suspended SATA device. For obscure reasons, the rescan procedure causes the link to be hard-reset, which disconnects the device. The rescan tries to carry out a runtime resume when accessing the device. scsi_rescan_device() holds the SCSI device lock and won't release it until it can put commands onto the device's block queue. This can't happen until the queue is successfully runtime-resumed or the device is unregistered. But the runtime resume fails because the device is disconnected, and __scsi_remove_device() can't do the unregistration because it can't get the device lock. The best way to resolve this deadlock appears to be to allow the block queue to start running again even after an unsuccessful runtime resume. The idea is that the driver or the SCSI error handler will need to be able to use the queue to resolve the runtime resume failure. This patch removes the err argument to blk_post_runtime_resume() and makes the routine act as though the resume was successful always. This fixes the deadlock. Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com Fixes: e27829dc92e5 ("scsi: serialize ->rescan against ->remove") Reported-and-tested-by: John Garry <john.garry@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27block: fix error unwinding in device_add_diskChristoph Hellwig1-7/+6
[ Upstream commit 99d8690aae4b2f0d1d90075de355ac087f820a66 ] One device_add is called disk->ev will be freed by disk_release, so we should free it twice. Fix this by allocating disk->ev after device_add so that the extra local unwinding can be removed entirely. Based on an earlier patch from Tetsuo Handa. Reported-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+28a66a9fbc621c939000@syzkaller.appspotmail.com> Fixes: 83cbce9574462c6b ("block: add error handling for device_add_disk / add_disk") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211221161851.788424-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27bfq: Do not let waker requests skip proper accountingJan Kara1-43/+1
[ Upstream commit c65e6fd460b4df796ecd6ea22e132076ed1f2820 ] Commit 7cc4ffc55564 ("block, bfq: put reqs of waker and woken in dispatch list") added a condition to bfq_insert_request() which added waker's requests directly to dispatch list. The rationale was that completing waker's IO is needed to get more IO for the current queue. Although this rationale is valid, there is a hole in it. The waker does not necessarily serve the IO only for the current queue and maybe it's current IO is not needed for current queue to make progress. Furthermore injecting IO like this completely bypasses any service accounting within bfq and thus we do not properly track how much service is waker's queue getting or that the waker is actually doing any IO. Depending on the conditions this can result in the waker getting too much or too few service. Consider for example the following job file: [global] directory=/mnt/repro/ rw=write size=8g time_based runtime=30 ramp_time=10 blocksize=1m direct=0 ioengine=sync [slowwriter] numjobs=1 prioclass=2 prio=7 fsync=200 [fastwriter] numjobs=1 prioclass=2 prio=0 fsync=200 Despite processes have very different IO priorities, they get the same about of service. The reason is that bfq identifies these processes as having waker-wakee relationship and once that happens, IO from fastwriter gets injected during slowwriter's time slice. As a result bfq is not aware that fastwriter has any IO to do and constantly schedules only slowwriter's queue. Thus fastwriter is forced to compete with slowwriter's IO all the time instead of getting its share of time based on IO priority. Drop the special injection condition from bfq_insert_request(). As a result, requests will be tracked and queued in a normal way and on next dispatch bfq_select_queue() can decide whether the waker's inserted requests should be injected during the current queue's timeslice or not. Fixes: 7cc4ffc55564 ("block, bfq: put reqs of waker and woken in dispatch list") Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-8-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22iocost: Fix divide-by-zero on donation from low hweight cgroupTejun Heo1-1/+8
commit edaa26334c117a584add6053f48d63a988d25a6e upstream. The donation calculation logic assumes that the donor has non-zero after-donation hweight, so the lowest active hweight a donating cgroup can have is 2 so that it can donate 1 while keeping the other 1 for itself. Earlier, we only donated from cgroups with sizable surpluses so this condition was always true. However, with the precise donation algorithm implemented, f1de2439ec43 ("blk-iocost: revamp donation amount determination") made the donation amount calculation exact enabling even low hweight cgroups to donate. This means that in rare occasions, a cgroup with active hweight of 1 can enter donation calculation triggering the following warning and then a divide-by-zero oops. WARNING: CPU: 4 PID: 0 at block/blk-iocost.c:1928 transfer_surpluses.cold+0x0/0x53 [884/94867] ... RIP: 0010:transfer_surpluses.cold+0x0/0x53 Code: 92 ff 48 c7 c7 28 d1 ab b5 65 48 8b 34 25 00 ae 01 00 48 81 c6 90 06 00 00 e8 8b 3f fe ff 48 c7 c0 ea ff ff ff e9 95 ff 92 ff <0f> 0b 48 c7 c7 30 da ab b5 e8 71 3f fe ff 4c 89 e8 4d 85 ed 74 0 4 ... Call Trace: <IRQ> ioc_timer_fn+0x1043/0x1390 call_timer_fn+0xa1/0x2c0 __run_timers.part.0+0x1ec/0x2e0 run_timer_softirq+0x35/0x70 ... iocg: invalid donation weights in /a/b: active=1 donating=1 after=0 Fix it by excluding cgroups w/ active hweight < 2 from donating. Excluding these extreme low hweight donations shouldn't affect work conservation in any meaningful way. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: f1de2439ec43 ("blk-iocost: revamp donation amount determination") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/Ybfh86iSvpWKxhVM@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)Davidlohr Bueso1-0/+3
commit e6a59aac8a8713f335a37d762db0dbe80e7f6d38 upstream. do_each_pid_thread(PIDTYPE_PGID) can race with a concurrent change_pid(PIDTYPE_PGID) that can move the task from one hlist to another while iterating. Serialize ioprio_get to take the tasklist_lock in this case, just like it's set counterpart. Fixes: d69b78ba1de (ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()) Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20211210182058.43417-1-dave@stgolabs.net Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01block: avoid to quiesce queue in elevator_init_mqMing Lei1-2/+8
commit 245a489e81e13dd55ae46d27becf6d5901eb7828 upstream. elevator_init_mq() is only called before adding disk, when there isn't any FS I/O, only passthrough requests can be queued, so freezing queue plus canceling dispatch work is enough to drain any dispatch activities, then we can avoid synchronize_srcu() in blk_mq_quiesce_queue(). Long boot latency issue can be fixed in case of lots of disks added during booting. Fixes: 737eb78e82d5 ("block: Delay default elevator initialization") Reported-by: yangerkun <yangerkun@huawei.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211117115502.1600950-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-01blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()Ming Lei5-11/+20
commit 2a19b28f7929866e1cec92a3619f4de9f2d20005 upstream. For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_wdt mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_debug] Reported-by: ChanghuiZhong <czhong@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: linux-scsi@vger.kernel.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211116014343.610501-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25block: Check ADMIN before NICE for IOPRIO_CLASS_RTAlistair Delva1-1/+8
commit 94c4b4fd25e6c3763941bdec3ad54f2204afa992 upstream. Booting to Android userspace on 5.14 or newer triggers the following SELinux denial: avc: denied { sys_nice } for comm="init" capability=23 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=0 Init is PID 0 running as root, so it already has CAP_SYS_ADMIN. For better compatibility with older SEPolicy, check ADMIN before NICE. Fixes: 9d3a39a5f1e4 ("block: grant IOPRIO_CLASS_RT to CAP_SYS_NICE") Signed-off-by: Alistair Delva <adelva@google.com> Cc: Khazhismel Kumykov <khazhy@google.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Paul Moore <paul@paul-moore.com> Cc: selinux@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: kernel-team@android.com Cc: stable@vger.kernel.org # v5.14+ Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Serge Hallyn <serge@hallyn.com> Link: https://lore.kernel.org/r/20211115181655.3608659-1-adelva@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25blk-cgroup: fix missing put device in error path from blkg_conf_pref()Yu Kuai1-4/+5
[ Upstream commit 15c30104965101b8e76b24d27035569d6613a7d6 ] If blk_queue_enter() failed due to queue is dying, the blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded. Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20211102020705.2321858-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25blkcg: Remove extra blkcg_bio_issue_initLaibin Qiu1-3/+1
[ Upstream commit b781d8db580c058ecd54ed7d5dde7f8270b25f5b ] KASAN reports a use-after-free report when doing block test: ================================================================== [10050.967049] BUG: KASAN: use-after-free in submit_bio_checks+0x1539/0x1550 [10050.977638] Call Trace: [10050.978190] dump_stack+0x9b/0xce [10050.979674] print_address_description.constprop.6+0x3e/0x60 [10050.983510] kasan_report.cold.9+0x22/0x3a [10050.986089] submit_bio_checks+0x1539/0x1550 [10050.989576] submit_bio_noacct+0x83/0xc80 [10050.993714] submit_bio+0xa7/0x330 [10050.994435] mpage_readahead+0x380/0x500 [10050.998009] read_pages+0x1c1/0xbf0 [10051.002057] page_cache_ra_unbounded+0x4c2/0x6f0 [10051.007413] do_page_cache_ra+0xda/0x110 [10051.008207] force_page_cache_ra+0x23d/0x3d0 [10051.009087] page_cache_sync_ra+0xca/0x300 [10051.009970] generic_file_buffered_read+0xbea/0x2130 [10051.012685] generic_file_read_iter+0x315/0x490 [10051.014472] blkdev_read_iter+0x113/0x1b0 [10051.015300] aio_read+0x2ad/0x450 [10051.023786] io_submit_one+0xc8e/0x1d60 [10051.029855] __se_sys_io_submit+0x125/0x350 [10051.033442] do_syscall_64+0x2d/0x40 [10051.034156] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [10051.048733] Allocated by task 18598: [10051.049482] kasan_save_stack+0x19/0x40 [10051.050263] __kasan_kmalloc.constprop.1+0xc1/0xd0 [10051.051230] kmem_cache_alloc+0x146/0x440 [10051.052060] mempool_alloc+0x125/0x2f0 [10051.052818] bio_alloc_bioset+0x353/0x590 [10051.053658] mpage_alloc+0x3b/0x240 [10051.054382] do_mpage_readpage+0xddf/0x1ef0 [10051.055250] mpage_readahead+0x264/0x500 [10051.056060] read_pages+0x1c1/0xbf0 [10051.056758] page_cache_ra_unbounded+0x4c2/0x6f0 [10051.057702] do_page_cache_ra+0xda/0x110 [10051.058511] force_page_cache_ra+0x23d/0x3d0 [10051.059373] page_cache_sync_ra+0xca/0x300 [10051.060198] generic_file_buffered_read+0xbea/0x2130 [10051.061195] generic_file_read_iter+0x315/0x490 [10051.062189] blkdev_read_iter+0x113/0x1b0 [10051.063015] aio_read+0x2ad/0x450 [10051.063686] io_submit_one+0xc8e/0x1d60 [10051.064467] __se_sys_io_submit+0x125/0x350 [10051.065318] do_syscall_64+0x2d/0x40 [10051.066082] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [10051.067455] Freed by task 13307: [10051.068136] kasan_save_stack+0x19/0x40 [10051.068931] kasan_set_track+0x1c/0x30 [10051.069726] kasan_set_free_info+0x1b/0x30 [10051.070621] __kasan_slab_free+0x111/0x160 [10051.071480] kmem_cache_free+0x94/0x460 [10051.072256] mempool_free+0xd6/0x320 [10051.072985] bio_free+0xe0/0x130 [10051.073630] bio_put+0xab/0xe0 [10051.074252] bio_endio+0x3a6/0x5d0 [10051.074984] blk_update_request+0x590/0x1370 [10051.075870] scsi_end_request+0x7d/0x400 [10051.076667] scsi_io_completion+0x1aa/0xe50 [10051.077503] scsi_softirq_done+0x11b/0x240 [10051.078344] blk_mq_complete_request+0xd4/0x120 [10051.079275] scsi_mq_done+0xf0/0x200 [10051.080036] virtscsi_vq_done+0xbc/0x150 [10051.080850] vring_interrupt+0x179/0x390 [10051.081650] __handle_irq_event_percpu+0xf7/0x490 [10051.082626] handle_irq_event_percpu+0x7b/0x160 [10051.083527] handle_irq_event+0xcc/0x170 [10051.084297] handle_edge_irq+0x215/0xb20 [10051.085122] asm_call_irq_on_stack+0xf/0x20 [10051.085986] common_interrupt+0xae/0x120 [10051.086830] asm_common_interrupt+0x1e/0x40 ================================================================== Bio will be checked at beginning of submit_bio_noacct(). If bio needs to be throttled, it will start the timer and stop submit bio directly. Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires. But in the current process, if bio is throttled, it will still set bio issue->value by blkcg_bio_issue_init(). This is redundant and may cause the above use-after-free. CPU0 CPU1 submit_bio submit_bio_noacct submit_bio_checks blk_throtl_bio() <=mod_timer(&sq->pending_timer blk_throtl_dispatch_work_fn submit_bio_noacct() <= bio have throttle tag, will throw directly and bio issue->value will be set here bio_endio() bio_put() bio_free() <= free this bio blkcg_bio_issue_init(bio) <= bio has been freed and will lead to UAF return BLK_QC_T_NONE Fix this by remove extra blkcg_bio_issue_init. Fixes: e439bedf6b24 (blkcg: consolidate bio_issue_init() to be a part of core) Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Link: https://lore.kernel.org/r/20211112093354.3581504-1-qiulaibin@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18block: Hold invalidate_lock in BLKRESETZONE ioctlShin'ichiro Kawasaki1-10/+5
commit 86399ea071099ec8ee0a83ac9ad67f7df96a50ad upstream. When BLKRESETZONE ioctl and data read race, the data read leaves stale page cache. The commit e5113505904e ("block: Discard page cache of zone reset target range") added page cache truncation to avoid stale page cache after the ioctl. However, the stale page cache still can be read during the reset zone operation for the ioctl. To avoid the stale page cache completely, hold invalidate_lock of the block device file mapping. Fixes: e5113505904e ("block: Discard page cache of zone reset target range") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.15 Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211111085238.942492-1-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18block: Hold invalidate_lock in BLKZEROOUT ioctlShin'ichiro Kawasaki1-3/+9
commit 35e4c6c1a2fc2eb11b9306e95cda1fa06a511948 upstream. When BLKZEROOUT ioctl and data read race, the data read leaves stale page cache. To avoid the stale page cache, hold invalidate_lock of the block device file mapping. The stale page cache is observed when blktests test case block/009 is modified to call "blkdiscard -z" command and repeated hundreds of times. This patch can be applied back to the stable kernel version v5.15.y. Rework is required for older stable kernels. Fixes: 22dd6d356628 ("block: invalidate the page cache when issuing BLKZEROOUT") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.15 Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211109104723.835533-3-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18block: Hold invalidate_lock in BLKDISCARD ioctlShin'ichiro Kawasaki1-3/+9
commit 7607c44c157d343223510c8ffdf7206fdd2a6213 upstream. When BLKDISCARD ioctl and data read race, the data read leaves stale page cache. To avoid the stale page cache, hold invalidate_lock of the block device file mapping. The stale page cache is observed when blktests test case block/009 is repeated hundreds of times. This patch can be applied back to the stable kernel version v5.15.y with slight patch edit. Rework is required for older stable kernels. Fixes: 351499a172c0 ("block: Invalidate cache on discard v2") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.15 Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211109104723.835533-2-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18block: fix device_add_disk() kobject_create_and_add() error handlingLuis Chamberlain1-2/+6
[ Upstream commit fe7d064fa3faec5d8157029fb8720b4fddc9e1e8 ] Commit 83cbce957446 ("block: add error handling for device_add_disk / add_disk") added error handling to device_add_disk(), however the goto label for the kobject_create_and_add() failure did not set the return value correctly, and so we can end up in a situation where kobject_create_and_add() fails but we report success. Fixes: 83cbce957446 ("block: add error handling for device_add_disk / add_disk") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211103164023.1384821-1-mcgrof@kernel.org [axboe: fold in followup fix from Wu Bo <wubo40@huawei.com>] Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18blk-cgroup: synchronize blkg creation against policy deactivationYu Kuai1-0/+10
[ Upstream commit 0c9d338c8443b06da8e8d3bfce824c5ea6d3488f ] Our test reports a null pointer dereference: [ 168.534653] ================================================================== [ 168.535614] Disabling lock debugging due to kernel taint [ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 168.537274] #PF: supervisor read access in kernel mode [ 168.537964] #PF: error_code(0x0000) - not-present page [ 168.538667] PGD 0 P4D 0 [ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN [ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100 [ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364 [ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0 [ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0 [ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002 [ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000 [ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428 [ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001 [ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000 [ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0 [ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000 [ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0 [ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.555888] Call Trace: [ 168.556221] <TASK> [ 168.556510] blkg_create+0x1c0/0x8c0 [ 168.556989] blkg_conf_prep+0x574/0x650 [ 168.557502] ? stack_trace_save+0x99/0xd0 [ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0 [ 168.558629] tg_set_conf.constprop.0+0xb9/0x280 [ 168.559231] ? kasan_set_track+0x29/0x40 [ 168.559758] ? kasan_set_free_info+0x30/0x60 [ 168.560344] ? tg_set_limit+0xae0/0xae0 [ 168.560853] ? do_sys_openat2+0x33b/0x640 [ 168.561383] ? do_sys_open+0xa2/0x100 [ 168.561877] ? __x64_sys_open+0x4e/0x60 [ 168.562383] ? __kasan_check_write+0x20/0x30 [ 168.562951] ? copyin+0x48/0x70 [ 168.563390] ? _copy_from_iter+0x234/0x9e0 [ 168.563948] tg_set_conf_u64+0x17/0x20 [ 168.564467] cgroup_file_write+0x1ad/0x380 [ 168.565014] ? cgroup_file_poll+0x80/0x80 [ 168.565568] ? __mutex_lock_slowpath+0x30/0x30 [ 168.566165] ? pgd_free+0x100/0x160 [ 168.566649] kernfs_fop_write_iter+0x21d/0x340 [ 168.567246] ? cgroup_file_poll+0x80/0x80 [ 168.567796] new_sync_write+0x29f/0x3c0 [ 168.568314] ? new_sync_read+0x410/0x410 [ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80 [ 168.569425] ? copy_page_range+0x2b10/0x2b10 [ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0 [ 168.570622] vfs_write+0x46e/0x630 [ 168.571091] ksys_write+0xcd/0x1e0 [ 168.571563] ? __x64_sys_read+0x60/0x60 [ 168.572081] ? __kasan_check_write+0x20/0x30 [ 168.572659] ? do_user_addr_fault+0x446/0xff0 [ 168.573264] __x64_sys_write+0x46/0x60 [ 168.573774] do_syscall_64+0x35/0x80 [ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.574960] RIP: 0033:0x7fac74915130 [ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444 [ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130 [ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001 [ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700 [ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009 [ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0 [ 168.583757] </TASK> [ 168.584063] Modules linked in: [ 168.584494] CR2: 0000000000000008 [ 168.584964] ---[ end trace 2475611ad0f77a1a ]--- This is because blkg_alloc() is called from blkg_conf_prep() without holding 'q->queue_lock', and elevator is exited before blkg_create(): thread 1 thread 2 blkg_conf_prep spin_lock_irq(&q->queue_lock); blkg_lookup_check -> return NULL spin_unlock_irq(&q->queue_lock); blkg_alloc blkcg_policy_enabled -> true pd = ->pd_alloc_fn blkg->pd[i] = pd blk_mq_exit_sched bfq_exit_queue blkcg_deactivate_policy spin_lock_irq(&q->queue_lock); __clear_bit(pol->plid, q->blkcg_pols); spin_unlock_irq(&q->queue_lock); q->elevator = NULL; spin_lock_irq(&q->queue_lock); blkg_create if (blkg->pd[i]) ->pd_init_fn -> q->elevator is NULL spin_unlock_irq(&q->queue_lock); Because blkcg_deactivate_policy() requires queue to be frozen, we can grab q_usage_counter to synchoronize blkg_conf_prep() against blkcg_deactivate_policy(). Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18blk-wbt: prevent NULL pointer dereference in wb_timer_fnAndrea Righi1-0/+3
[ Upstream commit 480d42dc001bbfe953825a92073012fcd5a99161 ] The timer callback used to evaluate if the latency is exceeded can be executed after the corresponding disk has been released, causing the following NULL pointer dereference: [ 119.987108] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 119.987617] #PF: supervisor read access in kernel mode [ 119.987971] #PF: error_code(0x0000) - not-present page [ 119.988325] PGD 7c4a4067 P4D 7c4a4067 PUD 7bf63067 PMD 0 [ 119.988697] Oops: 0000 [#1] SMP NOPTI [ 119.988959] CPU: 1 PID: 9353 Comm: cloud-init Not tainted 5.15-rc5+arighi #rc5+arighi [ 119.989520] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 [ 119.990055] RIP: 0010:wb_timer_fn+0x44/0x3c0 [ 119.990376] Code: 41 8b 9c 24 98 00 00 00 41 8b 94 24 b8 00 00 00 41 8b 84 24 d8 00 00 00 4d 8b 74 24 28 01 d3 01 c3 49 8b 44 24 60 48 8b 40 78 <4c> 8b b8 98 00 00 00 4d 85 f6 0f 84 c4 00 00 00 49 83 7c 24 30 00 [ 119.991578] RSP: 0000:ffffb5f580957da8 EFLAGS: 00010246 [ 119.991937] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004 [ 119.992412] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88f476d7f780 [ 119.992895] RBP: ffffb5f580957dd0 R08: 0000000000000000 R09: 0000000000000000 [ 119.993371] R10: 0000000000000004 R11: 0000000000000002 R12: ffff88f476c84500 [ 119.993847] R13: ffff88f4434390c0 R14: 0000000000000000 R15: ffff88f4bdc98c00 [ 119.994323] FS: 00007fb90bcd9c00(0000) GS:ffff88f4bdc80000(0000) knlGS:0000000000000000 [ 119.994952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 119.995380] CR2: 0000000000000098 CR3: 000000007c0d6000 CR4: 00000000000006e0 [ 119.995906] Call Trace: [ 119.996130] ? blk_stat_free_callback_rcu+0x30/0x30 [ 119.996505] blk_stat_timer_fn+0x138/0x140 [ 119.996830] call_timer_fn+0x2b/0x100 [ 119.997136] __run_timers.part.0+0x1d1/0x240 [ 119.997470] ? kvm_clock_get_cycles+0x11/0x20 [ 119.997826] ? ktime_get+0x3e/0xa0 [ 119.998110] ? native_apic_msr_write+0x2c/0x30 [ 119.998456] ? lapic_next_event+0x20/0x30 [ 119.998779] ? clockevents_program_event+0x94/0xf0 [ 119.999150] run_timer_softirq+0x2a/0x50 [ 119.999465] __do_softirq+0xcb/0x26f [ 119.999764] irq_exit_rcu+0x8c/0xb0 [ 120.000057] sysvec_apic_timer_interrupt+0x43/0x90 [ 120.000429] ? asm_sysvec_apic_timer_interrupt+0xa/0x20 [ 120.000836] asm_sysvec_apic_timer_interrupt+0x12/0x20 In this case simply return from the timer callback (no action required) to prevent the NULL pointer dereference. BugLink: https://bugs.launchpad.net/bugs/1947557 Link: https://lore.kernel.org/linux-mm/YWRNVTk9N8K0RMst@arighi-desktop/ Fixes: 34dbad5d26e2 ("blk-stat: convert to callback-based statistics reporting") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Link: https://lore.kernel.org/r/YW6N2qXpBU3oc50q@arighi-desktop Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18block: remove inaccurate requeue checkJens Axboe1-1/+0
[ Upstream commit 037057a5a979c7eeb2ee5d12cf4c24b805192c75 ] This check is meant to catch cases where a requeue is attempted on a request that is still inserted. It's never really been useful to catch any misuse, and now it's actively wrong. Outside of that, this should not be a BUG_ON() to begin with. Remove the check as it's now causing active harm, as requeue off the plug path will trigger it even though the request state is just fine. Reported-by: Yi Zhang <yi.zhang@redhat.com> Link: https://lore.kernel.org/linux-block/CAHj4cs80zAUc2grnCZ015-2Rvd-=gXRfB_dFKy=RTm+wRo09HQ@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18block: bump max plugged deferred size from 16 to 32Jens Axboe2-2/+8
[ Upstream commit ba0ffdd8ce48ad7f7e85191cd29f9674caca3745 ] Particularly for NVMe with efficient deferred submission for many requests, there are nice benefits to be seen by bumping the default max plug count from 16 to 32. This is especially true for virtualized setups, where the submit part is more expensive. But can be noticed even on native hardware. Reduce the multiple queue factor from 4 to 2, since we're changing the default size. While changing it, move the defines into the block layer private header. These aren't values that anyone outside of the block layer uses, or should use. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-29Merge tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-blockLinus Torvalds3-15/+40
Pull block fixes from Jens Axboe: - NVMe pull request: - fix nvmet-tcp header digest verification (Amit Engel) - fix a memory leak in nvmet-tcp when releasing a queue (Maurizio Lombardi) - fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg) - fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun Prakash) - fix possible nvme-tcp req->offset corruption (Varun Prakash) - Queue drain ordering fix (Ming) - Partition check regression for zoned devices (Shin'ichiro) - Zone queue restart fix (Naohiro) * tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block: block: Fix partition check for host-aware zoned block devices nvmet-tcp: fix header digest verification nvmet-tcp: fix data digest pointer calculation nvme-tcp: fix data digest pointer calculation nvme-tcp: fix possible req->offset corruption block: schedule queue restart after BLK_STS_ZONE_RESOURCE block: drain queue after disk is removed from sysfs nvme-tcp: fix H2CData PDU send accounting (again) nvmet-tcp: fix a memory leak when releasing a queue
2021-10-27block: Fix partition check for host-aware zoned block devicesShin'ichiro Kawasaki1-1/+19
Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") modified the method to check partition existence in host-aware zoned block devices from disk_has_partitions() helper function call to empty check of xarray disk->part_tbl. However, disk->part_tbl always has single entry for disk->part0 and never becomes empty. This resulted in the host-aware zoned devices always judged to have partitions, and it made the sysfs queue/zoned attribute to be "none" instead of "host-aware" regardless of partition existence in the devices. This also caused DEBUG_LOCKS_WARN_ON(lock->magic != lock) for sdkp->rev_mutex in scsi layer when the kernel detects host-aware zoned device. Since block layer handled the host-aware zoned devices as non- zoned devices, scsi layer did not have chance to initialize the mutex for zone revalidation. Therefore, the warning was triggered. To fix the issues, call the helper function disk_has_partitions() in place of disk->part_tbl empty check. Since the function was removed with the commit a33df75c6328, reimplement it to walk through entries in the xarray disk->part_tbl. Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org # v5.14+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211026060115.753746-1-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: schedule queue restart after BLK_STS_ZONE_RESOURCENaohiro Aota1-4/+9
When dispatching a zone append write request to a SCSI zoned block device, if the target zone of the request is already locked, the device driver will return BLK_STS_ZONE_RESOURCE and the request will be pushed back to the hctx dipatch queue. The queue will be marked as RESTART in dd_finish_request() and restarted in __blk_mq_free_request(). However, this restart applies to the hctx of the completed request. If the requeued request is on a different hctx, dispatch will no be retried until another request is submitted or the next periodic queue run triggers, leading to up to 30 seconds latency for the requeued request. Fix this problem by scheduling a queue restart similarly to the BLK_STS_RESOURCE case or when we cannot get the budget. Also, consolidate the checks into the "need_resource" variable to simplify the condition. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/r/20211026165127.4151055-1-naohiro.aota@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26block: drain queue after disk is removed from sysfsMing Lei1-10/+12
Before removing disk from sysfs, userspace still may change queue via sysfs, such as switching elevator or setting wbt latency, both may reinitialize wbt, then the warning in blk_free_queue_stats() will be triggered since rq_qos_exit() is moved to del_gendisk(). Fixes the issue by moving draining queue & tearing down after disk is removed from sysfs, at that time no one can come into queue's store()/show(). Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20211026101204.2897166-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-23Merge tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+4
Pull block fixes from Jens Axboe: "Fix for the cgroup code not ussing irq safe stats updates, and one fix for an error handling condition in add_partition()" * tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block: block: fix incorrect references to disk objects blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu
2021-10-18block: fix incorrect references to disk objectsZqiang1-0/+1
When adding partitions to the disk, the reference count of the disk object is increased. then alloc partition device and called device_add(), if the device_add() return error, the reference count of the disk object will be reduced twice, at put_device(pdev) and put_disk(disk). this leads to the end of the object's life cycle prematurely, and trigger following calltrace. __init_work+0x2d/0x50 kernel/workqueue.c:519 synchronize_rcu_expedited+0x3af/0x650 kernel/rcu/tree_exp.h:847 bdi_remove_from_list mm/backing-dev.c:938 [inline] bdi_unregister+0x17f/0x5c0 mm/backing-dev.c:946 release_bdi+0xa1/0xc0 mm/backing-dev.c:968 kref_put include/linux/kref.h:65 [inline] bdi_put+0x72/0xa0 mm/backing-dev.c:976 bdev_free_inode+0x11e/0x220 block/bdev.c:408 i_callback+0x3f/0x70 fs/inode.c:226 rcu_do_batch kernel/rcu/tree.c:2508 [inline] rcu_core+0x76d/0x16c0 kernel/rcu/tree.c:2743 __do_softirq+0x1d7/0x93b kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0xf2/0x130 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x93/0xc0 making disk is NULL when calling put_disk(). Reported-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211018103422.2043-1-qiang.zhang1211@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18Merge tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-blockLinus Torvalds6-75/+123
Pull block fixes from Jens Axboe: "Bigger than usual for this point in time, the majority is fixing some issues around BDI lifetimes with the move from the request_queue to the disk in this release. In detail: - Series on draining fs IO for del_gendisk() (Christoph) - NVMe pull request via Christoph: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares) - brd locking scope fix (Tetsuo) - BFQ fix (Paolo)" * tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block: block, bfq: reset last_bfqq_created on group change block: warn when putting the final reference on a registered disk brd: reduce the brd_devices_mutex scope kyber: avoid q->disk dereferences in trace points block: keep q_usage_counter in atomic mode after del_gendisk block: drain file system I/O on del_gendisk block: split bio_queue_enter from blk_queue_enter block: factor out a blk_try_enter_queue helper block: call submit_bio_checks under q_usage_counter nvme: fix per-namespace chardev deletion block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs nvme-pci: Fix abort command id
2021-10-17blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on ↵Tejun Heo1-2/+3
blkg->iostat_cpu c3df5fb57fe8 ("cgroup: rstat: fix A-A deadlock on 32bit around u64_stats_sync") made u64_stats updates irq-safe to avoid A-A deadlocks. Unfortunately, the conversion missed one in blk_cgroup_bio_start(). Fix it. Fixes: 2d146aa3aa84 ("mm: memcontrol: switch to rstat") Cc: stable@vger.kernel.org # v5.13+ Reported-by: syzbot+9738c8815b375ce482a1@syzkaller.appspotmail.com Signed-off-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/YWi7NrQdVlxD6J9W@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-05-19 23:47:16 +0300