summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2013-03-04Merge tag 'metag-v3.9-rc1-v4' of ↵Linus Torvalds3-0/+204
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull new ImgTec Meta architecture from James Hogan: "This adds core architecture support for Imagination's Meta processor cores, followed by some later miscellaneous arch/metag cleanups and fixes which I kept separate to ease review: - Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture - A few fixes all over, particularly for symbol prefixes - A few privilege protection fixes - Several cleanups (setup.c includes, split out a lot of metag_ksyms.c) - Fix some missing exports - Convert hugetlb to use vm_unmapped_area() - Copy device tree to non-init memory - Provide dma_get_sgtable()" * tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits) metag: Provide dma_get_sgtable() metag: prom.h: remove declaration of metag_dt_memblock_reserve() metag: copy devicetree to non-init memory metag: cleanup metag_ksyms.c includes metag: move mm/init.c exports out of metag_ksyms.c metag: move usercopy.c exports out of metag_ksyms.c metag: move setup.c exports out of metag_ksyms.c metag: move kick.c exports out of metag_ksyms.c metag: move traps.c exports out of metag_ksyms.c metag: move irq enable out of irqflags.h on SMP genksyms: fix metag symbol prefix on crc symbols metag: hugetlb: convert to vm_unmapped_area() metag: export clear_page and copy_page metag: export metag_code_cache_flush_all metag: protect more non-MMU memory regions metag: make TXPRIVEXT bits explicit metag: kernel/setup.c: sort includes perf: Enable building perf tools for Meta metag: add boot time LNKGET/LNKSET check metag: add __init to metag_cache_probe() ...
2013-03-03metag: Time keepingJames Hogan3-0/+204
Add time keeping code for metag. Meta hardware threads have 2 timers. The background timer (TXTIMER) is used as a free-running time base, and the interrupt timer (TXTIMERI) is used for the timer interrupt. Both counters traditionally count at approximately 1MHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-01Merge tag 'late-mvebu-rebased' of ↵Linus Torvalds1-38/+112
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC mvebu platform changes from Olof Johansson: "This series contains changes for the Marvell EBU platforms (mvebu, orion, kirkwood, dove) that were not part of the first set of pull requests because of dependencies on the MMC tree, and being submitted a little late. Notable changes are: - More devices get moved out of board files into device tree descriptions. The remaining devices listed in there have patches that will get sent for 3.10, after which we can remove a lot of the board files entirely. We are doing the pinctrl and mmc drivers here, ethernet and PCI still remain. - SMP support for mvebu is improved with support for the local interrupt controller. - The Guruplug board file gets replaced with a DT description. Unfortunately, the dependency on the MMC tree turned out to be a much larger problem than expected, when the MMC maintainer rebased the patches in his tree that all of the patches in this branch are based on, which caused merge conflicts between the new and old versions of those patches. To work around the merge conflicts, this branch rebases all patches on top of the respective MMC patches that did get merged into 3.9. The patches are all identical to the versions that were part of linux-next, but have a new commit date." * tag 'late-mvebu-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (90 commits) arm: mvebu: enable the SD card slot on Armada 370 Reference Design board ARM: kirkwood: topkick: init mvsdio via DT ARM: kirkwood: nsa310: convert to pinctrl ARM: Kirkwood: topkick: Enable i2c bus. ARM: kirkwood: topkick: convert to pinctrl ARM: dove: convert serial DT nodes to clocks property arm: mvebu: Add SPI flash on Armada 370 DB board arm: mvebu: Add SPI flash on Armada XP-DB board arm: mvebu: Add SPI flash on Armada XP-GP board arm: mvebu: Add support for SPI controller in Armada 370/XP clocksource: update and move armada-370-xp-timer documentation to timer directory arm: mvebu: update DT to support local timers ARM: Dove: convert usb host controller to DT arm: mvebu: Enable USB controllers on Armada 370/XP boards arm: mvebu: Add support for USB host controllers in Armada 370/XP arm: mvebu: add button for OpenBlocks AX3-4 ARM: Kirkwood: Convert NS2 to gpio-poweroff. ARM: Kirkwood: Convert NSA310 I2C to device tree ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver ARM: Kirkwood: Convert NSA310 to DT based regulators. ...
2013-02-28clocksource: time-armada-370-xp: add local timer supportGregory CLEMENT1-38/+112
On the SOCs Armada 370 and Armada XP, each CPU comes with two private timers. This patch use the timer 0 of each CPU as local timer for the clockevent if CONFIG_LOCAL_TIMER is selected. In the other case, use only the private Timer 0 of CPU 0. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-02-28Merge branch 'timer/cleanup' into late/mvebu2Arnd Bergmann7-28/+62
Basing the mvebu patches on top of the timer cleanup avoids some nasty merges. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-27Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource : Nomadik-mtu : fix missing irq initialization posix-timer: Don't call idr_find() with out-of-range ID
2013-02-22clocksource : Nomadik-mtu : fix missing irq initializationDaniel Lezcano1-0/+1
This patch fix the clock device irq field which is not initialized. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: patches@linaro.org Cc: linus.walleij@stericsson.com Cc: john.stultz@linaro.org Link: http://lkml.kernel.org/r/1361547870-32638-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-22Merge tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds4-237/+394
Pull ARM virtualization changes: "This contains parts of the ARM KVM support that have dependencies on other patches merged through the arm-soc tree. In combination with patches coming through Russell's tree, this will finally add full support for the kernel based virtual machine on ARM, which has been awaited for some time now. Further, we now have a separate platform for virtual machines and qemu booting that is used by both Xen and KVM, separating these from the Versatile Express reference implementation. Obviously, this new platform is multiplatform capable so it can be combined with existing machines in the same kernel." * tag 'virt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) ARM: arch_timer: include linux/errno.h arm: arch_timer: add missing inline in stub function ARM: KVM: arch_timers: Wire the init code and config option ARM: KVM: arch_timers: Add timer world switch ARM: KVM: arch_timers: Add guest timer core support ARM: KVM: Add VGIC configuration option ARM: KVM: VGIC initialisation code ARM: KVM: VGIC control interface world switch ARM: KVM: VGIC interrupt injection ARM: KVM: vgic: retire queued, disabled interrupts ARM: KVM: VGIC virtual CPU interface management ARM: KVM: VGIC distributor handling ARM: KVM: VGIC accept vcpu and dist base addresses from user space ARM: KVM: Initial VGIC infrastructure code ARM: KVM: Keep track of currently running vcpus KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctl ARM: gic: add __ASSEMBLY__ guard to C definitions ARM: gic: define GICH offsets for VGIC support ARM: gic: add missing distributor defintions ARM: mach-virt: fixup machine descriptor after removal of sys_timer ...
2013-02-22Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+11
Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
2013-02-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds11-53/+535
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-11Merge branch 'depends/cleanup' into next/virtOlof Johansson10-52/+250
2013-02-06Merge tag 'tegra-for-3.9-cleanup' of ↵Olof Johansson2-0/+282
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup From Stephen Warren: ARM: tegra: cleanup This pull request contains various cleanup and minor changes to core Tegra code: * Tegra clocksource driver is moved to drivers/clocksource. * Various typos, warning cleanup, statics cleanup, section mismatch fixes, etc. * Various small fixes/cleanups for CPU/hotplug/SMP code. This pull request is based on a merge of v3.8-rc3 and at least part of arm-soc's timer/cleanup branch. * tag 'tegra-for-3.9-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: fix compile error when disable CPU_IDLE ARM: tegra30: make the wait time of CPU power up to proportional to HZ ARM: tegra: make device can run on UP ARM: tegra: clean up the CPUINIT section ARM: tegra: moving the clock gating procedure to tegra_cpu_kill ARM: tegra: update the cache maintenance order for CPU shutdown ARM: tegra30: fix power up sequence for boot_secondary ARM: tegra: cpufreq: move clk_get/put out of function tegra_cpu_init/exit ARM: tegra: fix Kconfig warnings when !SMP ARM: tegra: Make variables static clocksource: tegra: cosmetic: Fix error message ARM: tegra: move timer.c to drivers/clocksource/ Signed-off-by: Olof Johansson <olof@lixom.net> Trivial conflicts: arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c drivers/clocksource/Makefile
2013-01-31ARM: arch_timers: switch to physical timers if HYP mode is availableMarc Zyngier1-1/+6
If we're booted in HYP mode, it is possible that we'll run some kind of virtualized environment. In this case, it is a better to switch to the physical timers, and leave the virtual timers to guests. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-01-31arm64: move from arm_generic to arm_arch_timerMark Rutland4-238/+1
The arch_timer driver supports a superset of the functionality of the arm_generic driver, and is not tied to a particular arch. This patch moves arm64 to use the arch_timer driver, gaining additional functionality in doing so, and removes the (now unused) arm_generic driver. Timer-related hooks specific to arm64 are moved into arch/arm64/kernel/time.c. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-01-31arm: arch_timer: move core to drivers/clocksourceMark Rutland3-0/+389
The core functionality of the arch_timer driver is not directly tied to anything under arch/arm, and can be split out. This patch factors out the core of the arch_timer driver, so it can be shared with other architectures. A couple of functions are added so that architecture-specific code can interact with the driver without needing to touch its internals. The ARM_ARCH_TIMER config variable is moved out to drivers/clocksource/Kconfig, existing uses in arch/arm are replaced with HAVE_ARM_ARCH_TIMER, which selects it. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2013-01-29Merge tag 'bcm2835-for-3.9-cleanup' of ↵Olof Johansson1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi into next/cleanup From Stephen Warren: ARM: bcm2835: cleanup This pull request simply converts the bcm2835 clocksource driver to use the recently added CLKSRC_OF feature. The branch is based on v3.8-rc3, followed by a merge of arm-soc's timer/cleanup branch. * tag 'bcm2835-for-3.9-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi: ARM: bcm2835: make use of CLKSRC_OF Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-29Merge branch 'depends/cleanup' into next/driversOlof Johansson15-68/+266
* depends/cleanup: (375 commits) ARM: at91: fix board-rm9200-dt after sys_timer conversion clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use timer: vt8500: Move timer code to drivers/clocksource irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ...
2013-01-28clocksource: tegra: cosmetic: Fix error messageHiroshi Doyu1-1/+1
Add missing \n. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: move timer.c to drivers/clocksource/Stephen Warren2-0/+286
Move arch/arm/mach-tegra/timer.c to drivers/clocksource/tegra20_timer.c so that the code is co-located with other clocksource drivers, and to reduce the size of the mach-tegra directory. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28Merge remote-tracking branch 'korg_arm-soc/timer/cleanup' into for-3.9/cleanupStephen Warren7-28/+62
2013-01-24clk: sunxi: Use common of_clk_init() functionPrashant Gaikwad1-2/+2
Use common of_clk_init() function to initialize clocks. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@anandra.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15Merge branch 'vt8500/timer' into next/cleanupOlof Johansson1-1/+2
* vt8500/timer: timer: vt8500: Convert vt8500 to use CLKSRC_OF Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-15timer: vt8500: Convert vt8500 to use CLKSRC_OFTony Prisk1-1/+2
This patch converts arch-vt8500 to make use of CLKSRC_OF. Doing so removes the need for include/linux/vt8500_timer.h as vt8500_timer_init no longer needs to be visible outside vt8500_timer.c Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-15ARM: bcm2835: make use of CLKSRC_OFStephen Warren1-2/+3
Using CLKSRC_OF enables deletion of the SoC-specific header bcm2835_timer.h, replacing the custom function bcm2835_timer_init() with the standardized automatic clocksource_of_init(). Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2013-01-15Merge remote-tracking branch 'korg_arm-soc/timer/cleanup' into cleanupStephen Warren7-28/+62
2013-01-15Merge tag 'vt8500/timer' of git://server.prisktech.co.nz/git/linuxwmt into ↵Olof Johansson3-0/+183
next/cleanup From Tony Prisk: Move arch-vt8500/timer.c to drivers/clocksource/vt8500-timer.c * tag 'vt8500/timer' of git://server.prisktech.co.nz/git/linuxwmt: timer: vt8500: Move timer code to drivers/clocksource Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-14Merge branch 'clocksource/cleanup' into next/cleanupOlof Johansson8-40/+21
Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-pxa/time.c
2013-01-14clocksource: use clockevents_config_and_register() where possibleShawn Guo3-24/+5
The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-14timer: vt8500: Move timer code to drivers/clocksourceTony Prisk3-0/+188
This patch moves arch-vt8500/timer.c into drivers/clocksource and updates the necessary Kconfig/Makefile options. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2013-01-07clocksource: nomadik-mtu: support timer-based delayFabio Baltieri1-0/+11
This patch adds support to use Nomadik MTU for timer-based delay. Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-04Drivers: clocksource: remove __dev* attributes.Greg Kroah-Hartman5-16/+16
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-02clocksource: add common of_clksrc_init() functionStephen Warren3-0/+39
It is desirable to move all clocksource drivers to drivers/clocksource, yet each requires its own initialization function. We'd rather not pollute <linux/> with a header for each function. Instead, create a single of_clksrc_init() function which will determine which clocksource driver to initialize based on device tree. Based on a similar patch for drivers/irqchip by Thomas Petazzoni. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24ARM: delete struct sys_timerStephen Warren3-15/+3
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24ARM: ux500: convert timer suspend/resume to clock_event_deviceStephen Warren1-13/+20
Move ux500's timer suspend/resume functions from struct sys_timer ux500_timer into struct clock_event_device nmdk_clkevt. This will allow the sys_timer suspend/resume fields to be removed, and eventually lead to a complete removal of struct sys_timer. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-15Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-5/+6
Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson: "This is a branch with updates for Marvell's mvebu/kirkwood platforms. They came in late-ish, and were heavily interdependent such that it didn't make sense to split them up across the cross-platform topic branches. So here they are (for the second release in a row) in a branch on their own." * tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits) arm: l2x0: add aurora related properties to OF binding arm: mvebu: add Aurora L2 Cache Controller to the DT arm: mvebu: add L2 cache support dma: mv_xor: fix error handling path dma: mv_xor: fix error checking of irq_of_parse_and_map() dma: mv_xor: use request_irq() instead of devm_request_irq() dma: mv_xor: clear the window override control registers arm: mvebu: fix address decoding armada_cfg_base() function ARM: mvebu: update defconfig with I2C and RTC support ARM: mvebu: Add SATA support for OpenBlocks AX3-4 ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4 ARM: mvebu: Add support for I2C on OpenBlocks AX3-4 ARM: mvebu: Add support for I2C controllers in Armada 370/XP arm: mvebu: Add hardware I/O Coherency support arm: plat-orion: Add coherency attribute when setup mbus target arm: dma mapping: Export a dma ops function arm_dma_set_mask arm: mvebu: Add SMP support for Armada XP arm: mm: Add support for PJ4B cpu and init routines arm: mvebu: Add IPI support via doorbells arm: mvebu: Add initial support for power managmement service unit ...
2012-12-13Merge tag 'multiplatform' of ↵Linus Torvalds3-1/+247
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform conversion patches from Olof Johansson: "Here are more patches in the progression towards multiplatform, sparse irq conversions in particular. Tegra has a handful of cleanups and general groundwork, but is not quite there yet on full enablement. Platforms that are enabled through this branch are VT8500 and Zynq. Note that i.MX was converted in one of the earlier cleanup branches as well (before we started a separate topic for multiplatform). And both new platforms for this merge window, sunxi and bcm, were merged with multiplatform support enabled." Fix up conflicts mostly as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: tegra: move debug-macro.S to include/debug ARM: tegra: don't include iomap.h from debug-macro.S ARM: tegra: decouple uncompress.h and debug-macro.S ARM: tegra: simplify DEBUG_LL UART selection options ARM: tegra: select SPARSE_IRQ ARM: tegra: enhance timer.c to get IO address from device tree ARM: tegra: enhance timer.c to get IRQ info from device tree ARM: timer: fix checkpatch warnings ARM: tegra: add TWD to device tree ARM: tegra: define DT bindings for and instantiate RTC ARM: tegra: define DT bindings for and instantiate timer clocksource/mtu-nomadik: use apb_pclk clk: ux500: Register mtu apb_pclocks ARM: plat-nomadik: convert platforms to SPARSE_IRQ mfd/db8500-prcmu: use the irq_domain_add_simple() mfd/ab8500-core: use irq_domain_add_simple() ...
2012-12-13Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-0/+175
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'arm64-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 updates from Catalin Marinas: - Generic execve, kernel_thread, fork/vfork/clone. - Preparatory patches for KVM support (initialising EL2 mode for later installing KVM support, hypervisor stub). - Signal handling corner case fix (alternative signal stack set up for a SEGV handler, which is raised in response to RLIMIT_STACK being reached). - Sub-nanosecond timer error fix. * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (30 commits) arm64: Update the MAINTAINERS entry arm64: compat for clock_adjtime(2) is miswired arm64: move FP-SIMD save/restore code to a macro arm64: hyp: initialize vttbr_el2 to zero arm64: add hypervisor stub arm64: record boot mode when entering the kernel arm64: move vector entry macro to assembler.h arm64: add AArch32 execution modes to ptrace.h arm64: expand register mapping between AArch32 and AArch64 arm64: generic timer: use virtual counter instead of physical at EL0 arm64: vdso: defer shifting of nanosecond component of timespec arm64: vdso: rework __do_get_tspec register allocation and return shift arm64: vdso: check sequence counter even for coarse realtime operations arm64: vdso: fix clocksource mask when extracting bottom 56 bits ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ Documentation: Fixes a word in Documentation/arm64/memory.txt arm64: Make !dirty ptes read-only arm64: Convert empty flush_cache_{mm,page} functions to static inline arm64: signal: let the compiler inline compat_get_sigframe arm64: signal: return struct rt_sigframe from get_sigframe ... Conflicts: arch/arm64/include/asm/unistd32.h
2012-12-05arm64: generic timer: use virtual counter instead of physical at EL0Will Deacon1-1/+1
We want to use the virtual counter at EL0, as the physical counter may not track the current clocksource for guests running under a hypervisor. This patch updates the vdso and generic timer driver to use the virtual counter. The kernel EL2 entry code is also updated to ensure that the virtual offset is initialised to zero. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-12-04clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_idsAxel Lin1-0/+1
The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-20clocksource: convert time-armada-370-xp to clk frameworkGregory CLEMENT1-5/+6
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>
2012-11-17clocksource: sunxi: Add Allwinner A1X Timer DriverMaxime Ripard3-0/+174
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: John Stultz <johnstul@us.ibm.com>
2012-11-16clocksource/mtu-nomadik: use apb_pclkUlf Hansson1-1/+7
After improving the clock tree we need to make sure the the MTU timer explicitly grabs and enables it silicon clock (pclk). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2012-11-13time: Kill xtime_lock, replacing it with jiffies_lockJohn Stultz1-1/+1
Now that timekeeping is protected by its own locks, rename the xtime_lock to jifffies_lock to better describe what it protects. CC: Thomas Gleixner <tglx@linutronix.de> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-11-13clocksource: arm_generic: use this_cpu_ptr per-cpu helperShan Wei1-1/+1
Utilize this_cpu_ptr() instead of per_cpu_ptr(...,smp_processor_id()) Signed-off-by: Shan Wei <davidshan@tencent.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-11-13clocksource: arm_generic: use integer math helpersLinus Walleij1-2/+2
This will make the two crucial integer divisions in the generic ARM arch timer used for ARMv8 use the kernel DIV_ROUND_CLOSEST() helper inline from <linux/kernel.h> so they get more precise. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-11-13clocksource: clean up parse_pmtmr()Dan Carpenter1-9/+8
I changed the strict_strtoul() to kstrtouint(). That has the check for UINT_MAX built in to it so the ifdefs can be removed. Also I changed a printk() to pr_info(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-11-05ARM: plat-nomadik: move MTU, kill plat-nomadikLinus Walleij3-1/+241
This moves the MTU timer driver from arch/arm/plat-nomadik to drivers/clocksource and moves the header file to the platform_data directory. As this moves the last file being compiled to an object out of arch/arm/plat-nomadik, we have to "turn off the light" and delete the plat-nomadik directory, because it is not allowed to have an empty Makefile in a plat-* directory. This is probably also a desired side effect of depopulating the arch/arm directory of drivers. Luckily we have just deleted all the <plat/*> include files prior to this so by moving the last one we may delete the directory. After this all the Ux500 and Nomadik device drivers live outside of the arch/arm hierarchy. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-03Merge tag 'pm-for-3.7-rc1' of ↵Linus Torvalds3-20/+204
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...
2012-10-02Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-0/+163
Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...