Age | Commit message (Collapse) | Author | Files | Lines |
|
HDMI and DisplayPort sequences states that audio and PSR should be
disabled before planes are disabled.
Not following it did not caused any problems up to Alderlake-P but
for this platform it causes underruns during the PSR2 disable
sequence.
Specification don't mention that DRRS should be disabled before planes
but it looks safer to switch back to the default refresh rate before
following with the rest of the pipe disable sequence.
BSpec: 49191
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com
|
|
A new step has been added to the DP modeset sequences for all platforms
with display version 12 and beyond: if enabling DP MST with FEC, we
need to set a chicken bit before enabling the transcoder. The chicken
bit should be disabled again before disabling the transcoder (which we
can do unconditionally since it shouldn't be set anyway in non-MST
cases).
Bspec: 49190, 54128, 55424
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723170618.1477415-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Earlier HDCP over MST support was added for TGL Platform.
Extending it to all future platfroms.
v2:
- Remove the platform check and commit log changes. [Jani]
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705122208.25618-1-anshuman.gupta@intel.com
|
|
Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clear out the straggler 'intel_crtc' variables.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[why]
Link rate in kHz is what is eventually required to calculate the link
bandwidth, which makes kHz a more generic unit. This should also make
forward-compatibility with new DP standards easier.
[how]
- Replace 'link rate DPCD code' with 'link rate in kHz' when used with
drm_dp_mst_topology_mgr_init()
- Add/remove related DPCD code conversion from/to kHz where applicable
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose).
Driver Changes:
- Display plane clock rates fixes and improvements (Ville).
- Uninint DMC FW loader state during shutdown (Imre).
- Convert snprintf to sysfs_emit (Xuezhi).
- Fix invalid access to ACPI _DSM objects (Takashi).
- A big refactor around how i915 addresses the graphics
and display IP versions. (Matt, Lucas).
- Backlight fix (Lyude).
- Display watermark and DBUF fixes (Ville).
- HDCP fix (Anshuman).
- Improve cases where display is not available (Jose).
- Defeature PSR2 for RKL and ALD-S (Jose).
- VLV DSI panel power fixes and improvements (Hans).
- display-12 workaround (Jose).
- Fix modesetting (Imre).
- Drop redundant address-of op before lttpr_common_caps array (Imre).
- Fix compiler checks (Jose, Jason).
- GLK display fixes (Ville).
- Fix error code returns (Dan).
- eDP novel: back again to slow and wide link training everywhere (Kai-Heng).
- Abstract DMC FW path (Rodrigo).
- Preparation and changes for upcoming
XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh).
- Fix comment typo in DSI code (zuoqilin).
- Simplify CCS and UV plane alignment handling (Imre).
- PSR Fixes on TGL (Gwan-gyeong, Jose).
- Add intel_dp_hdcp.h and rename init (Jani).
- Move crtc and dpll declarations around (Jani).
- Fix pre-skl DP AUX precharge length (Ville).
- Remove stray newlines from random files (Ville).
- crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville).
- Add frontbuffer tracking tracepoints (Ville).
- ADL-S PCI ID updates (Anand).
- Use unique backlight device names (Jani).
- A few clean-ups on i915/audio (Jani).
- Use intel_framebuffer instead of drm one on intel_fb functions (Imre).
- Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre).
- Nuke display error state (Ville).
- ADL-P initial enablement patches
starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika).
- Display clean-up around VBT and the strap bits (Lucas).
- Try YCbCr420 color when RGB fails (Werner).
- More PSR fixes and improvements (Jose).
- Other generic display code clean-up (Jose, Ville).
- Use correct downstream caps for check Src-Ctl mode for PCON (Ankit).
- Disable HiZ Raw Stall Optimization on broken gen7 (Simon).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
|
|
Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.
This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)
@has_include@
@@
(
#include "intel_de.h"
|
#include "display/intel_de.h"
)
@depends on find && !has_include@
@@
+ #include "intel_de.h"
#include "intel_display_types.h"
@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
#include "display/intel_display_types.h"
Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
|
|
[why]
Previously used value was not safe to provide the correct value, i.e. it
could be 0 if not not configured, leading to no MST on this platform.
[how]
Do not use the value from BIOS, but from the structure populated at
encoder initialization time.
Fixes: 98025a62cb00 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[fixed open coded drm_dp_link_rate_to_bw_code()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430214531.24565-2-nikola.cornij@amd.com
|
|
[why]
DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is
set, Extended Base Receiver Capability DPCD space must be used. Without
doing that, the three DPCD values that differ will be wrong, leading to
incorrect or limited functionality. MST link rate, for example, could
have a lower value. Also, Synaptics quirk wouldn't work out well when
Extended DPCD was not read, resulting in no DSC for such hubs.
[how]
Modify MST topology manager to use the values from Extended DPCD where
applicable.
To prevent regression on the sources that have a lower maximum link rate
capability than MAX_LINK_RATE from Extended DPCD, have the drivers
supply maximum lane count and rate at initialization time.
This also reverts commit 2dcab875e763 ("Revert drm/dp_mst: Retrieve
extended DPCD caps for topology manager"), brining the change back to the
original commit ad44c03208e4 ("drm/dp_mst: Retrieve extended DPCD caps for
topology manager").
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429221151.22020-2-nikola.cornij@amd.com
|
|
The definitions are in the crtc and dpll files; move the declarations to
the corresponding headers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427120315.12342-1-jani.nikula@intel.com
|
|
Add separate intel_dp_hdcp.h to go with intel_dp_hdcp.c, and rename the
init function intel_dp_hdcp_init() to follow naming where function
prefix matches the file name.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427114520.4740-1-jani.nikula@intel.com
|
|
Since this is one of the few functions in drm_dp_mst_topology.c that
doesn't have any way of getting access to a drm_device, let's pass the
drm_dp_mst_topology_mgr down to this function so that it can use
drm_dbg_kms().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-14-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
|
|
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too. We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.
v2:
- Restore a lost negation in intel_pll_is_valid().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
|
|
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead. The
following semantic patch was used:
@@ expression dev_priv, E; @@
- INTEL_GEN(dev_priv) == E
+ IS_DISPLAY_VER(dev_priv, E)
@@ expression dev_priv; @@
- INTEL_GEN(dev_priv)
+ DISPLAY_VER(dev_priv)
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ IS_DISPLAY_VER(dev_priv, E)
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_DISPLAY_RANGE(dev_priv, from, until)
There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c. Those will be updated separately.
v2:
- Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
|
|
Stop assuming intel_ddi_get_config() is all we need from the primary
encoder, and instead call it via the .get_config() vfunc. This
will allow customized .get_config() for the primary, which I plan
to use to handle the differences in the clock readout between various
platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
This moves the code from various places and consolidates it
into one new file.
v2:
- rename skl_program_plane -> skl_program_plane_scaler (Ville)
- also move skl_pfit_enable, and consequently make some skl_scaler_*
functions static to skl_scaler.c (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com
|
|
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).
One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).
Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).
Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com
|
|
This reverts commit 0883ce8146ed6074c76399f4e70dbed788582e12. Originally
these quirks were added because of the issues with using the eDP
backlight interfaces on certain laptop panels, which made it impossible
to properly probe for DPCD backlight support without having a whitelist
for panels that we know have working VESA backlight control interfaces
over DPCD. As well, it should be noted it was impossible to use the
normal sink OUI for recognizing these panels as none of them actually
filled out their OUIs, hence needing to resort to checking EDIDs.
At the time we weren't really sure why certain panels had issues with
DPCD backlight controls, but we eventually figured out that there was a
second interface that these problematic laptop panels actually did work
with and advertise properly: Intel's proprietary backlight interface for
HDR panels. So far the testing we've done hasn't brought any panels to
light that advertise this interface and don't support it properly, which
means we finally have a real solution to this problem.
As a result, we now have no need for the force DPCD backlight quirk, and
furthermore this also removes the need for any kind of EDID quirk
checking in DRM. So, let's just revert it for now since we were the only
driver using this.
v3:
* Rebase
v2:
* Fix indenting error picked up by checkpatch in
intel_edp_init_connector()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-6-lyude@redhat.com
|
|
Enable HDCP 1.4 over DP MST for Gen12.
v2:
- Enable HDCP for <= Gen12 platforms. [Ram]
v3:
- Connector detials in debug msg. [Ram]
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-10-anshuman.gupta@intel.com
|
|
Gen12 has H/W delta with respect to HDCP{1.x,2.x} display engine
instances lies in Transcoder instead of DDI as in Gen11.
This requires hdcp driver to use mst_master_transcoder for link
authentication and stream transcoder for stream encryption
separately.
This will be used for both HDCP 1.4 and HDCP 2.2 over DP MST
on Gen12.
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-6-anshuman.gupta@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.11:
UAPI Changes:
Cross-subsystem Changes:
* char/agp: Disable frontend without CONFIG_DRM_LEGACY
* mm: Fix fput in mmap error path; Introduce vma_set_file() to change
vma->vm_file
Core Changes:
* dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code;
Skip sync for unmapped buffers; Alloc higher order pages is available;
Respect num_fences when initializing shared fence list
* doc: Improvements around DRM modes and SCALING_FILTER
* Pass full state to connector atomic functions + callee updates
* Cleanups
* shmem: Map pages with caching by default; Cleanups
* ttm: Fix DMA32 for global page pool
* fbdev: Cleanups
* fb-helper: Update framebuffer after userspace writes; Unmap console buffer
during shutdown; Rework damage handling of shadow framebuffer
Driver Changes:
* amdgpu: Multi-hop fixes, Clenaups
* imx: Fix rotation for Vivante tiled formats; Support nearest-neighour
skaling; Cleanups
* mcde: Fix RGB formats; Support DPI output; Cleanups
* meson: HDMI clock fixes
* panel: Add driver and bindings for Innolux N125HCE-GN1
* panel/s6e63m0: More backlight levels; Fix init; Cleanups
* via: Clenunps
* virtio: Use fence ID for handling fences; Cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
|
|
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Now that the CRTCs have been converted, let's move forward with the
connectors to provide a consistent interface.
The conversion was done using the coccinelle script below, and built tested
on all the drivers.
@@
identifier connector, connector_state;
@@
struct drm_connector_helper_funcs {
...
struct drm_encoder* (*atomic_best_encoder)(struct drm_connector *connector,
- struct drm_connector_state *connector_state);
+ struct drm_atomic_state *state);
...
}
@@
identifier connector, connector_state;
@@
struct drm_connector_helper_funcs {
...
void (*atomic_commit)(struct drm_connector *connector,
- struct drm_connector_state *connector_state);
+ struct drm_atomic_state *state);
...
}
@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier f;
@@
f(..., struct drm_atomic_state *state, ...)
{
<+...
- FUNCS->atomic_commit(connector, connector_state);
+ FUNCS->atomic_commit(connector, state);
...+>
}
@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier var, f;
@@
f(struct drm_atomic_state *state, ...)
{
<+...
- var = FUNCS->atomic_best_encoder(connector, connector_state);
+ var = FUNCS->atomic_best_encoder(connector, state);
...+>
}
@ connector_atomic_func @
identifier helpers;
identifier func;
@@
(
static struct drm_connector_helper_funcs helpers = {
...,
.atomic_best_encoder = func,
...,
};
|
static struct drm_connector_helper_funcs helpers = {
...,
.atomic_commit = func,
...,
};
)
@@
identifier connector_atomic_func.func;
identifier connector;
symbol state;
@@
func(struct drm_connector *connector,
- struct drm_connector_state *state
+ struct drm_connector_state *connector_state
)
{
...
- state
+ connector_state
...
}
@ ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@
func(struct drm_connector *connector,
struct drm_connector_state *connector_state)
{
... when != connector_state
}
@ adds_state depends on connector_atomic_func && !ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@
func(struct drm_connector *connector, struct drm_connector_state *connector_state)
{
+ struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, connector);
...
}
@ depends on connector_atomic_func @
identifier connector_atomic_func.func;
identifier connector_state;
identifier connector;
@@
func(struct drm_connector *connector,
- struct drm_connector_state *connector_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118094758.506730-1-maxime@cerno.tech
|
|
Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.
v13:
* Allow bigjoiner if hdisplay >5120
v12:
* slice_count logic simplify (Ville)
* Fix unnecessary changes in downstream_mode_valid (Ville)
v11:
* Make intel_dp_can_bigjoiner non static
so it can be used in intel_display (Manasi)
v10:
* Simplify logic (Ville)
* Allow bigjoiner on edp (Ville)
v9:
* Restric Bigjoiner on PORT A (Ville)
v8:
* use source dotclock for max dotclock (Manasi)
v7:
* Add can_bigjoiner() helper (Ville)
* Pass bigjoiner to plane_size validation (Ville)
v6:
* Rebase after dp_downstream mode valid changes (Manasi)
v5:
* Increase max plane width to support 8K with bigjoiner (Maarten)
v4:
* Rebase (Manasi)
Changes since v1:
- Disallow bigjoiner on eDP.
Changes since v2:
- Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
and split off the downstream and source checking to its own function.
(Ville)
v3:
* Rebase (Manasi)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[vsyrjala:
* Keep bigjoiner disabled until everything is ready
* Appease checkpatch]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com
|
|
Rename intel_dp_sink_dpms() to intel_dp_set_power()
so one doesn't always have to convert from the DPMS
enum values to the actual DP D-states.
Also when dealing with a branch device this has nothing to
do with any sink, so the old name was nonsense anyway.
Also adjust the debug message accordingly, and pimp it
with the standard encoder id+name thing.
Trivial bits done with cocci:
@@
expression DP;
@@
(
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF)
+ intel_dp_set_power(DP, DP_SET_POWER_D3)
|
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON)
+ intel_dp_set_power(DP, DP_SET_POWER_D0)
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Move the checks to decide whether a fastset is possible during the
initial commit to an encoder hook. This check is really encoder specific
and the next patch will also require this adding a DP encoder specific
check.
v2: Fix negated condition in gen11_dsi_initial_fastset_check().
v3: Make sure to call the hook for all encoders on the crtc. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201005215311.1475666-1-imre.deak@intel.com
|
|
Now that we've plumbed the crtc state all the way down we can
eliminate the DP_TP_{CTL,STATUS} register offsets from intel_dp,
and instead we derive them directly from the crtc state.
And thus we can get rid of the nasty hack in intel_ddi_get_config()
which mutates intel_dp during the readout.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-12-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Pass the output_format directly to intel_dp_{min,output}_bpp()
rather than passing in the crtc_state and digging out the
output_format inside the functions. This will allow us to reuse
the functions for mode validation purposes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
|
|
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED
return false we have to be capable of shutting it down cleanly so
as to not anger the hw. To that end let's reduce the effect of
!INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected.
Should prevent anyone from automagically enabling any of them, while
still allowing us to cleanly shut them down.
v2: Put the check into the right place for CRT
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that all the groundwork has been laid, we can turn on HDCP 1.4 over
MST. Everything except for toggling the HDCP signalling and HDCP 2.2
support is the same as the DP case, so we'll re-use those callbacks
Cc: Juston Li <juston.li@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-12-sean@poorly.run #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-13-sean@poorly.run #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-13-sean@poorly.run #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-15-sean@poorly.run #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-17-sean@poorly.run #v5
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-17-sean@poorly.run #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-18-sean@poorly.run #v7
Changes in v2:
-Toggle HDCP from encoder disable/enable
-Don't disable HDCP on MST connector destroy, leave that for encoder
disable, just ensure the check_work routine isn't running any longer
Changes in v3:
-Place the shim in the new intel_dp_hdcp.c file (Ville)
Changes in v4:
-Actually use the mst shim for mst connections (Juston)
-Use QUERY_STREAM_ENC_STATUS MST message to verify channel is encrypted
Changes in v5:
-Add sleep on disable signalling to match hdmi delay
Changes in v6:
-Disable HDCP over MST on GEN12+ since I'm unsure how it should work and I
don't have hardware to test it
Changes in v7:
-Remove hdcp2 shims for MST in favor of skipping hdcp2 init (Ramalingam)
Changes in v8:
-None
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-18-sean@poorly.run
|
|
In order to act upon content_protection property changes, we'll need to
implement the .update_pipe() hook. We can re-use intel_ddi_update_pipe
for this
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-10-sean@poorly.run #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-11-sean@poorly.run #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-11-sean@poorly.run #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-11-sean@poorly.run #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-11-sean@poorly.run #v5
Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-11-sean@poorly.run #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-12-sean@poorly.run #v7
Changes in v2:
-None
Changes in v3:
-None
Changes in v4:
-None
Changes in v5:
-None
Changes in v6:
-None
Changes in v7:
-None
Changes in v8:
-None
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-12-sean@poorly.run
|
|
So far, max dot clock rate for MST mode rely on physcial
bandwidth limitation. It would caused compatibility issue
if source display resolution exceed MST hub output ability.
For example, source DUT had DP 1.2 output capability.
And MST docking just support HDMI 1.4 spec. When a HDMI 2.0
monitor connected. Source would retrieve EDID from external
and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps
because it did not surpass DP physical bandwidth limitation.
Do modeset to 4k@60fps, source output display data but MST
docking can't output HDMI properly due to this resolution
already over HDMI 1.4 spec.
Refer to commit <fcf463807596> ("drm/dp_mst: Use full_pbn
instead of available_pbn for bandwidth checks").
Source driver should refer to full_pbn to evaluate sink
output capability. And filter out the resolution surpass
sink output limitation.
Changes since v1:
* Using mgr->base.lock to protect full_pbn.
Changes since v2:
* Add ctx lock.
Changes since v3:
* s/intel_dp_mst_mode_clock_exceed_pbn_bandwidth/
intel_dp_mst_mode_clock_exceeds_pbn_bw/
* Use the new drm_connector_helper_funcs.mode_valid_ctx to properly pipe
down the drm_modeset_acquire_ctx that the probe helpers are using, so
we can safely grab &mgr->base.lock without deadlocking
Changes since v4:
* Move drm_dp_calc_pbn_mode(mode->clock, bpp, false) > port->full_pbn
check
* Fix the bpp we use in drm_dp_calc_pbn_mode()
* Drop leftover (!mgr) check
* Don't check for if full_pbn is unset. To be clear - it _can_ be unset,
but if it is then it's certainly a bug in DRM or a non-compliant sink
as full_pbn should always be populated by the time we call
->mode_valid_ctx.
We should workaround non-compliant sinks with full_pbn=0, but that
should happen in the DP MST helpers so we can estimate the full_pbn
value as best we can.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-3-lyude@redhat.com
|
|
We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around
5 intel_dport
36 dport
479 intel_dig_port
352 dig_port
Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.
v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
|
|
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The spec requires enabling the MST Virtual Channel payload allocation
- in a separate step - after the transcoder is enabled, follow this.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200623082411.3889-1-imre.deak@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
- Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline.
Cross-subsystem Changes:
- Assorted devicetree binding updates.
- Add might_sleep() to dma_fence_wait().
- Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages.
- Small cleanup with IS_BUILTIN in video/fbdev drivers.
- Fix video/hdmi coding style for infoframe size.
Core Changes:
- Silence vblank output during init.
- Fix DP-MST corruption during send msg timeout.
- Clear leak in drm_gem_objecs_lookup().
- Make newlines work with force connector attribute.
- Fix module refcounting error in drm_encoder_slave, and use new i2c api.
- Header fix for drm_managed.c
- More struct_mutex removal for !legacy drivers:
- Remove gem_free_object()
- Removal of drm_gem_object_put_unlocked().
- Show current->comm alongside pid in debug printfs.
- Add drm_client_modeset_check() + drm_client_framebuffer_flush().
- Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits.
- Remove mode->vrefresh, and compactify drm_display_mode.
- Use drm_* macros for logging and warnings.
- Add WARN when drm_gem_get_pages is used on a private obj.
- Handle importing and imported dmabuf better in shmem helpers.
- Small fix for drm/mm hole size comparison, and remove invalid entry optimization.
- Add a drm/mm selftest.
- Set DSI connector type for DSI panels.
- Assorted small fixes and documentation updates.
- Fix DDI I2C device registration for MST ports, and flushing on destroy.
- Fix master_set return type, used by vmwgfx.
- Make the drm_set/drop_master ioctl symmetrical.
Driver Changes:
Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE Allow iommu in the sun4i driver and use it for sun8i.
- Simplify backlight lookup for omap, amba-clcd and tilcdc.
- Hold reg_lock for rockchip.
- Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice.
- Small assorted fixes to tilcdc, vc4 (multiple), i915.
- Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers.
- Add support for KOE TX26D202VM0BWA panel.
- Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte.
- Remove gem_print_info.
- Improve gem_create_object_helper so udl can use shmem helpers.
- Convert vc4 dt bindings to schemas, and add clock properties.
- Device initialization cleanups for mgag200.
- Add a workaround to fix DP-MST short pulses handling on broken hardware in i915.
- Allow build test compiling arm drivers.
- Use managed pci functions in mgag200 and ast.
- Use dev_groups in malidp.
- Add per pixel alpha support for PX30 VOP in rockchip.
- Silence deferred probe logs in panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
|
|
During encoder enabling we clear the flag before starting the ACT
sequence and wait for the flag, but the clearing is missing during
encoder disabling, add it there too. Since nothing cleared the flag
automatically we could've run subsequent disabling steps too early.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-5-imre.deak@intel.com
|
|
It's not clear if the DP_TP_STATUS flags other than the ACT sent flag
have some side-effect, so don't clear those; we don't depend on the
state of these flags anyway.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-4-imre.deak@intel.com
|
|
During transcoder enabling we'll configure the transcoder in MST mode
and enable the VC payload allocation, which will start the ACT sequence.
Before waiting for the ACT sequence completion, we need to clear the ACT
sent flag, but based on the above we can do this right before enabling
the transcoder.
For clarity, move the flag clearing closer to where we wait for it.
While at it also factor out some common code.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-3-imre.deak@intel.com
|
|
According to BSpec the Data Island Packet should be disabled after
disabling the transcoder, but before the transcoder clock select is set
to none. On an ICL RVP, daisy-chained MST config not following this
leads to a hang with the following MCE when disabling the output:
[ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402
[ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0}
[ 871.019212] mce: [Hardware Error]: TSC 135a261fe61
[ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20
[ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt
[ 871.019212] Kernel panic - not syncing: Fatal machine check
[ 871.019212] Kernel Offset: disabled
Bspec: 4287
Fixes: fa37a213275c ("drm/i915: Stop sending DP SDPs on ddi disable")
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com
(cherry picked from commit c980216dd224c52b5c70172753c209b653d84958)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter,
incorrectly filter out HPD short pulses with a duration less than
~540 usec, leading to MST probe failures.
According to the DP Standard 2.0 section 5.1.4:
- DP sinks should generate short pulses in the 500 usec -> 1 msec range
- DP sources should detect short pulses in the 250 usec -> 2 msec range
According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters
should detect and forward short pulses according to how sources should
detect them as specified in the DP Standard (250 usec -> 2 msec).
Based on the above filtering out short pulses with a duration less than
540 usec is incorrect.
To make such adapters work add support for a driver polling on MST
inerrupt flags, and wire this up in the i915 driver. The sink can clear
an interrupt it raised after 110 msec if the source doesn't respond, so
use a 50 msec poll period to avoid missing an interrupt. Polling of the
MST interrupt flags is explicitly allowed by the DP Standard.
This fixes MST probe failures I saw using this adapter and a DELL U2515H
monitor.
v2:
- Fix the wait event timeout for the no-poll case.
v3 (Ville):
- Fix the short pulse duration limits in the commit log prescribed by the
DP Standard.
- Add code comment explaining why/how polling is used.
- Factor out a helper to schedule the port's hpd irq handler and move it
to the rest of hotplug handlers.
- Document the new MST callback.
- s/update_hpd_irq_state/poll_hpd_irq/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604184500.23730-2-imre.deak@intel.com
|
|
According to BSpec the Data Island Packet should be disabled after
disabling the transcoder, but before the transcoder clock select is set
to none. On an ICL RVP, daisy-chained MST config not following this
leads to a hang with the following MCE when disabling the output:
[ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402
[ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0}
[ 871.019212] mce: [Hardware Error]: TSC 135a261fe61
[ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20
[ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii'
[ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt
[ 871.019212] Kernel panic - not syncing: Fatal machine check
[ 871.019212] Kernel Offset: disabled
Bspec: 4287
Fixes: fa37a213275c ("drm/i915: Stop sending DP SDPs on ddi disable")
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915: Show per-engine default property values in sysfs
By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.
Cross-subsystem Changes:
- video/hdmi: Add Unpack only function for DRM infoframe
- Includes pull request gvt-next-2020-05-12
Driver Changes:
- Restore Cherryview back to full-ppgtt (Chris, Mika)
- Document locking guidelines for i915 (Chris, Daniel, Joonas)
- Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris)
- Display WA #1105: Require linear fb stride to be multiple of 512 bytes on
gen9/glk (Ville)
- Add Wa_14010685332 for ICP/ICL (Matt R)
- Restrict w/a 1607087056 for EHL/JSL (Swathi)
- Fix interrupt handling for DP AUX transactions on Tigerlake (Imre)
- Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika)
- Fix HDC pipeline flush hardware bit on Gen12 (Mika)
- Flush L3 when flushing render on Gen12 (Mika)
- Invalidate aux table entries forcibly between BB on Gen12 (Mika)
- Add aux table invalidate for all engines on Gen12 (Mika)
- Force pte cacheline to main memory Gen8+ (Mika)
- Add and enable TGL+ SAGV support (Stanislav)
- Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian)
- Replace zero-length array with flexible-array (Gustavo)
- Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris)
- Remove wait priority boosting (Chris)
- Keep driver module referenced when PMU is active (Chris)
- Sanitize RPS interrupts upon resume (Chris)
- Extend pcode read timeout to 20 ms (Chris)
- Wait for ACT sent before enabling MST pipe (Ville)
- Extend support to async relocations to SNB (Chris)
- Remove CNL pre-prod workarounds (Ville)
- Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan)
- Record the active CCID from before reset (Chris)
- Mark concurrent submissions with a weak-dependency (Chris)
- Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel)
- Prevent using semaphores to chain up to external fences (Chris)
- Fix GLK watermark calculations (Ville)
- Emit await(batch) before MI_BB_START (Chris)
- Reset execlists registers before HWSP (Chris)
- Drop no-semaphore boosting in favor of fast timeslicing (Chris)
- Fix enabled infoframe states of lspcon (Gwan-gyeong)
- Program DP SDPs on pipe updates (Gwan-gyeong)
- Stop sending DP SDPs on ddi disable (Gwan-gyeong)
- Store CS timestamp frequency in Hz (Ville)
- Remove unused HAS_FWTABLE macro (Pascal)
- Use batchbuffer chaining for relocations to save ring space (Chris)
- Try different engines for relocs if MI ops not supported (Chris, Tvrtko)
- Lazily acquire the device wakeref for freeing objects (Chris)
- Streamline display code arithmetics around rounding etc. (Ville)
- Use bw state for per crtc SAGV evaluation (Stanislav)
- Track active_pipes in bw_state (Stanislav)
- Nuke mode.vrefresh usage (Ville)
- Warn if the FBC is still writing to stolen on removal (Chris)
- Added new PCode commands prepping for QGV rescricting (Stansilav)
- Stop holding onto the pinned_default_state (Chris)
- Propagate error from completed fences (Chris)
- Ignore submit-fences on the same timeline (Chris)
- Pull waiting on an external dma-fence into its routine (Chris)
- Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris)
- Mark up the racy read of execlists->context_tag (Chris)
- Tidy up the return handling for completed dma-fences (Chris)
- Introduce skl_plane_wm_level accessor (Stanislav)
- Extract SKL SAGV checking (Stanislav)
- Make active_pipes check skl specific (Stanislav)
- Suspend tasklets before resume sanitization (Chris)
- Remove redundant exec_fence (Chris)
- Mark the addition of the initial-breadcrumb in the request (Chris)
- Transfer old virtual breadcrumbs to irq_worker (Chris)
- Read the DP SDPs from the video DIP (Gwan-gyeong)
- Program DP SDPs with computed configs (Gwan-gyeong)
- Add state readout for DP VSC and DP HDR Metadata Infoframe SDP
(Gwan-gyeong)
- Add compute routine for DP PSR VSC SDP (Gwan-gyeong)
- Use new DP VSC SDP compute routine on PSR (Gwan-gyeong)
- Restrict qgv points which don't have enough bandwidth. (Stanislav)
- Nuke pointless div by 64bit (Ville)
- Static checker code fixes (Nathan, Mika, Chris)
- Add logging function for DP VSC SDP (Gwan-gyeong)
- Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the
crtc state dump (Gwan-gyeong)
- Make timeslicing explicit engine property (Chris, Tvrtko)
- Selftest and debugging improvements (Chris)
- Align variable names with BSpec (Ville)
- Tidy up gen8+ breadcrumb emission code (Chris)
- Turn intel_digital_port_connected() in a vfunc (Ville)
- Use stashed away hpd isr bits in intel_digital_port_connected() (Ville)
- Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on
Iris Plus 655 and 4K screen (Chris)
- Add Wa_14011059788 for Tigerlake (Matt A)
- Add per ctx batchbuffer wa for timestamp for Gen12 (Mika)
- Use indirect ctx bb to load cmd buffer control value
from context image to avoid corruption (Mika)
- Enable DP Display Audio WA (Uma, Jani)
- Update forcewake firmware ranges for Icelake (Radhakrishna)
- Add missing deinitialization cases of load failure for display (Jose)
- Implement TC cold sequences for Icelake and Tigerlake (Jose)
- Unbreak enable_dpcd_backlight modparam (Lyude)
- Move the late flush_submission in retire to the end (Chris)
- Demote "Reducing compressed framebufer size" message to info (Peter)
- Push MST link retraining to the hotplug work (Ville)
- Hold obj->vma.lock over for_each_ggtt_vma() (Chris)
- Fix timeout handling during TypeC AUX power well enabling for ICL (Imre)
- Fix skl+ non-scaled pfit modes (Ville)
- Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris)
- Sanitize GT first before poisoning HWSP (Chris)
- Fix up clock RPS frequency readout (Chris)
- Avoid reusing the same logical CCID (Chris)
- Avoid dereferencing a dead context (Chris)
- Always enable busy-stats for execlists (Chris)
- Apply the aggressive downclocking to parking (Chris)
- Restore aggressive post-boost downclocking (Chris)
- Scrub execlists state on resume (Chris)
- Add debugfs attributes for LPSP (Ansuman)
- Improvements to kernel selftests (Chris, Mika)
- Add tiled blits selftest (Zbigniew)
- Fix error handling in __live_lrc_indirect_ctx_bb() (Dan)
- Add pre/post plane updates for SAGV (Stanislav)
- Add ICL PG3 PW ID for EHL (Anshuman)
- Fix Sphinx build duplicate label warning (Jani)
- Error log non-zero audio power refcount after unbind (Jani)
- Remove object_is_locked assertion from unpin_from_display_plane (Chris)
- Use single set of AUX powerwell ops for gen11+ (Matt R)
- Prefer drm_WARN_ON over WARN_ON (Pankaj)
- Poison residual state [HWSP] across resume (Chris, Tvrtko)
- Convert request-before-CS assertion to debug (Chris)
- Carefully order virtual_submission_tasklet (Chris)
- Check carefully for an idle engine in wait-for-idle (Chris)
- Only close vma we open (Chris)
- Trace RPS events (Chris)
- Use the RPM config register to determine clk frequencies (Chris)
- Drop rq->ring->vma peeking from error capture (Chris)
- Check preempt-timeout target before submit_ports (Chris)
- Check HWSP cacheline is valid before acquiring (Chris)
- Use proper fault mask in interrupt postinstall too (Matt R)
- Keep a no-frills swappable copy of the default context state (Chris)
- Add atomic helpers for bandwidth (Stanislav)
- Refactor setting dma info to a common helper from device info (Michael)
- Refactor DDI transcoder code for clairty (Ville)
- Extend PG3 power well ID to ICL (Anshuman)
- Refactor PFIT code for readability and future extensibility (Ville)
- Clarify code split between intel_ddi.c and intel_dp.c (Ville)
- Move out code to return the digital_port of the aux ch (Jose)
- Move rps.enabled/active and use of RPS interrupts to flags (Chris)
- Remove superfluous inlines and dead code (Jani)
- Re-disable -Wframe-address from top-level Makefile (Nick)
- Static checker and spelling fixes (Colin, Nathan)
- Split long lines (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430124904.GA100924@jlahtine-desk.ger.corp.intel.com
|
|
The correct sequence according to bspec is to wait for the ACT sent
status before we turn on the pipe. Make it so.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507144125.2458-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.8:
UAPI Changes:
- drm: error out with EBUSY when device has existing master
- drm: rework SET_MASTER and DROP_MASTER perm handling
Cross-subsystem Changes:
- mm: export two symbols from slub/slob
- fbdev: savage: fix -Wextra build warning
- video: omap2: Use scnprintf() for avoiding potential buffer overflow
Core Changes:
- Remove drm_pci.h
- drm_pci_{alloc/free)() are now legacy
- Introduce managed DRM resourcesA
- Allow drivers to subclass struct drm_framebuffer
- Introduce struct drm_afbc_framebuffer and helpers
- fbdev: remove return value from generic fbdev setup
- Introduce simple-encoder helper
- vram-helpers: set fence on plane
- dp_mst: ACT timeout improvements
- dp_mst: Remove drm_dp_mst_has_audio()
- TTM: ttm_trace_dma_{map/unmap}() cleanups
- dma-buf: add flag for PCIP2P support
- EDID: Various improvements
- Encoder: cleanup semantics of possible_clones and possible_crtcs
- VBLANK documentation updates
- Writeback documentation updates
Driver Changes:
- Convert several drivers to i2c_new_client_device()
- Drop explicit drm_mode_config_cleanup() calls from drivers
- Auto-release device structures with drmm_add_final_kfree()
- Init bfdev console after registering DRM device
- Make various .debugfs functions return 0 unconditionally; ignore errors
- video: Use scnprintf() to avoid buffer overflows
- Convert drivers to simple encoders
- drm/amdgpu: note that we can handle peer2peer DMA-buf
- drm/amdgpu: add support for exporting VRAM using DMA-buf v3
- drm/kirin: Revert change to register connectors
- drm/lima: Add optional devfreq and cooling device support
- drm/lima: Various improvements wrt. task handling
- drm/panel: nt39016: Support multiple modes and 50Hz
- drm/panel: Support Leadtek LTK050H3146W
- drm/rockchip: Add support for afbc
- drm/virtio: Various cleanups
- drm/hisilicon/hibmc: Enforce 128-byte stride alignment
- drm/qxl: Fix notify port address of cursor ring buffer
- drm/sun4i: Improvements to format handling
- drm/bridge: dw-hdmi: Various improvements
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g
|
|
Pass the encoder all the way down to
intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the
intel_ddi_get_crtc_encoder() eyesore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Push the TRANS_DDI_FUNC_CTL into the encoder enable hook. The disable
is already there, and as a followup will enable us to pass the encoder
all the way down.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since intel_ddi_enable_pipe_clock() was pushed down into the
encoder hooks we can pass on the encoder instead of having
to use intel_ddi_get_crtc_encoder().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Backmerging in order to pull "topic/phy-compliance".
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|