meta-ampere: mtjade: clean up unused codes

There are some redundant codes inside meta-mtjade:
- ampere-reset-host-check@.service: no longer be used.
- redundant :mtjade in phosphor-software-manager_%.bbappend
- Incorrect GPIO function call in ampere_platform_init.sh
This commit fixes the above issues.

Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Iadde88ba6472815556a2c0839c1e3e127c2a04d4

4 files changed, 6 insertions, 33 deletions

diff --git a/meta-ampere/meta-common/recipes-phosphor/flash/phosphor-software-manager_%.bbappend b/meta-ampere/meta-common/recipes-phosphor/flash/phosphor-software-manager_%.bbappend
index 7e855bcf5..853e5464a 100644
--- a/meta-ampere/meta-common/recipes-phosphor/flash/phosphor-software-manager_%.bbappend
+++ b/meta-ampere/meta-common/recipes-phosphor/flash/phosphor-software-manager_%.bbappend
@@ -6,13 +6,13 @@ SRC_URI += " \
 
 PACKAGECONFIG[flash_bios] = "-Dhost-bios-upgrade=enabled, -Dhost-bios-upgrade=disabled"
 
-PACKAGECONFIG:append:mtjade = " flash_bios"
+PACKAGECONFIG:append = " flash_bios"
 
 SYSTEMD_SERVICE:${PN}:updater += "${@bb.utils.contains('PACKAGECONFIG', 'flash_bios', 'obmc-flash-host-bios@.service', '', d)}"
 
 RDEPENDS:${PN} += "bash"
 
-do_install:append:mtjade() {
+do_install:append() {
     install -d ${D}/usr/sbin
     install -m 0755 ${WORKDIR}/firmware_update.sh ${D}/usr/sbin/firmware_update.sh
 }
diff --git a/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager/ampere-reset-host-check@.service b/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager/ampere-reset-host-check@.service
deleted file mode 100644
index 83f6581be..000000000
--- a/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager/ampere-reset-host-check@.service
+++ /dev/null
@@ -1,18 +0,0 @@
-[Unit]
-Description=Check Host%i status on BMC reset
-Wants=phosphor-ipmi-host.service
-After=phosphor-ipmi-host.service
-Wants=obmc-host-reset-running@%i.target
-Before=obmc-host-reset-running@%i.target
-Wants=op-reset-chassis-on@%i.service
-After=op-reset-chassis-on@%i.service
-Conflicts=obmc-host-stop@%i.target
-ConditionPathExists=/run/openbmc/chassis@%i-on
-
-[Service]
-RemainAfterExit=yes
-Type=oneshot
-ExecStart=/usr/sbin/ampere_host_check.sh 1 0
-
-[Install]
-WantedBy=obmc-host-reset@%i.target
\ No newline at end of file
diff --git a/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager_%.bbappend b/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager_%.bbappend
index b25ba5d94..03df6a30e 100644
--- a/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager_%.bbappend
+++ b/meta-ampere/meta-common/recipes-phosphor/state/phosphor-state-manager_%.bbappend
@@ -4,12 +4,3 @@ DEPS_CFG = "resetreason.conf"
 DEPS_TGT = "phosphor-discover-system-state@.service"
 SYSTEMD_OVERRIDE:${PN}-discover:append = "${DEPS_CFG}:${DEPS_TGT}.d/${DEPS_CFG}"
 
-FILES:${PN} += "${systemd_system_unitdir}/*"
-
-SRC_URI += " \
-             file://ampere-reset-host-check@.service \
-           "
-
-do_install:append() {
-    install -m 0644 ${WORKDIR}/ampere-reset-host-check@.service ${D}${systemd_unitdir}/system/phosphor-reset-host-check@.service
-}
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh b/meta-ampere/meta-jade/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh
index a15be6046..a2578fa2f 100644
--- a/meta-ampere/meta-jade/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh
@@ -21,10 +21,10 @@ gpio_configure_input 144
 gpio_configure_input 145
 
 # GPIOY3 BMC_VGA_SEL
-gpio_direction_output 195 1
+gpio_configure_output 195 1
 
 # GPIO_BMC_READY
-gpio_direction_output 229 1
+gpio_configure_output 229 1
 
 # =======================================================
 # Below GPIOs are controlled by other services so just
@@ -32,10 +32,10 @@ gpio_direction_output 229 1
 cmdline=`cat /proc/cmdline`
 if [[ $cmdline == *resetreason=power* ]]; then
 	# BMC_GPIOR2_EXT_HIGHTEMP_L
-	gpio_direction_output 138 1
+	gpio_configure_output 138 1
 
 	# GPIOS5 GPIO_BMC_VR_PMBUS_SEL_L
-	gpio_direction_output 149 1
+	gpio_configure_output 149 1
 
 	# GPIOH7 GPIO_BMC_I2C6_RESET_L
 	gpio_configure_output 63 1