diff options
| author | Ben_Pai <ben_pai@wistron.com> | 2019-10-17 09:00:58 +0300 |
|---|---|---|
| committer | Brad Bishop <bradleyb@fuzziesquirrel.com> | 2019-11-20 13:12:52 +0300 |
| commit | 85a58cd6dab9a41842eb2a3303d69fd3584902f4 (patch) | |
| tree | 4e88fc19c5f120ee9e0fbfd146f8fec2a5840ef7 /meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb | |
| parent | 5c50c44e40d20aa98730e437cd03deb59761bc71 (diff) | |
| download | openbmc-85a58cd6dab9a41842eb2a3303d69fd3584902f4.tar.xz | |
meta-ibm: Fix issue: fanx_1 can't get the correct pwm
Mihawk Every fan has two rotors but one of the rotors gets the wrong
fan pwm via REST command, so remove fanx_1 target.
Tested: Use command "curl -k -X GET https://root:0penBmc@<ip>/xyz/
openbmc_project/sensors/fan_tach/fan0_0"
This can show the correct pwm.
(From meta-ibm rev: 31a8e8430b5f2629249f80de7eb91b598fa6caca)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I68e40fefdc15a7580ca819084929813dae5d43a5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Diffstat (limited to 'meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb')
| -rw-r--r-- | meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf | 8 |
1 files changed, 1 insertions, 7 deletions
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf index 5d14ebc94..bb569f70a 100644 --- a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf +++ b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf @@ -5,21 +5,15 @@ LABEL_fan4 = "fan1_1" LABEL_fan5 = "fan2_0" LABEL_fan6 = "fan2_1" LABEL_fan7 = "fan3_0" -LABEL_fan8 = "fan3_1" +LABEL_fan8 = "fan3_1" LABEL_fan9 = "fan4_0" LABEL_fan10 = "fan4_1" LABEL_fan11 = "fan5_0" LABEL_fan12 = "fan5_1" PWM_TARGET_fan1 = "1" -PWM_TARGET_fan2 = "1" PWM_TARGET_fan3 = "2" -PWM_TARGET_fan4 = "2" PWM_TARGET_fan5 = "3" -PWM_TARGET_fan6 = "3" PWM_TARGET_fan7 = "4" -PWM_TARGET_fan8 = "4" PWM_TARGET_fan9 = "5" -PWM_TARGET_fan10 = "5" PWM_TARGET_fan11 = "6" -PWM_TARGET_fan12 = "6"
\ No newline at end of file |