linux-openbmc: Move to Linux 5.10

This moves the OpenBMC kernel to a v5.10 base for both Aspeed and
Nuvoton. There are 125 patches in the tree, with 80 of those patches not
yet queued for merging in v5.11.

Notably the PECI patchset has been dropped as the author, Intel, has
elected to develop it out of tree instead of submitting it for mainline
inclusion.

The remaining out of tree patches:

Alexander Amelkin (1):
      mtd: spi-nor: fix options for mx66l51235f

Andrew Geissler (1):
      ARM: dts: tacoma: Add KCS node for LPC MCTP

Andrew Jeffery (9):
      dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
      pmbus (max31785): Add support for devicetree configuration
      pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
      pmbus (core): One-shot retries for failure to set page
      pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
      ARM: dts: aspeed: witherspoon: Update max31785 node
      misc: Add ASPEED KCS driver for MCTP purposes
      ARM: dts: witherspoon: Add KCS node for LPC MCTP
      ARM: dts: aspeed: rainier: Don't shout addresses

Brad Bishop (3):
      ipmi: aspeed-g6: Add compatible strings
      reset: simple: Add AST2600 compatibility string
      eeprom: at25: Split reads into chunks and cap write size

Cédric Le Goater (19):
      mtd: spi-nor: aspeed: use command mode for reads
      mtd: spi-nor: aspeed: add support for SPI dual IO read mode
      mtd: spi-nor: aspeed: link controller with the ahb clock
      mtd: spi-nor: aspeed: optimize read mode
      mtd: spi-nor: aspeed: limit the maximum SPI frequency
      mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
      mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
      mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
      mtd: spi-nor: aspeed: add support for the 4B opcodes
      mtd: spi-nor: Add support for w25q512jv
      mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
      mtd: spi-nor: aspeed: Introduce segment operations
      mtd: spi-nor: aspeed: add initial support for ast2600
      mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
      mtd: spi-nor: aspeed: Introduce training operations per platform
      mtd: spi-nor: aspeed: Introduce a HCLK mask for training
      mtd: spi-nor: aspeed: check upper freq limit when doing training
      mtd: spi-nor: aspeed: add support for AST2600 training
      /dev/mem: add a devmem kernel parameter to activate the device

Dan Carpenter (1):
      soc: aspeed: xdma: Return -EFAULT if copy_from_user() fails

Eddie James (9):
      ARM: dts: rainier: Add KCS node for LPC MCTP
      ARM: dts: aspeed: Add witherspoon-128 machine
      dt-bindings: fsi: Add P10 OCC device documentation
      fsi: occ: Add support for P10
      hwmon: (occ) Add new temperature sensor type
      dt-bindings: input: Add documentation for IBM Operation Panel
      input: misc: Add IBM Operation Panel driver
      ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted
      ARM: dts: aspeed: Add Everest BMC machine

Fran Hsu (2):
      ARM: dts: nuvoton: npcm730: Add UDC device
      ARM: dts: nuvoton: gsj: Add non-mainline nodes

George Hung (2):
      dt-binding: edac: add NPCM ECC documentation
      edac: npcm: Add Nuvoton NPCM7xx EDAC driver

George Liu (2):
      ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
      ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver

Jae Hyun Yoo (1):
      clk: ast2600: enable BCLK for PCI/PCIe bus always

Joel Stanley (4):
      ARM: dts: aspeed: ast2600evb: Add MAC0
      drm/aspeed: Add sysfs for output settings
      net: ftgmac100: Ensure tx descriptor updates are visible
      ARM: configs: aspeed: Update defconfigs

Quan Nguyen (1):
      ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC

Ryan Sie (1):
      ARM: dts: aspeed: Add Supermicro x11spi BMC machine

Tomer Maimon (21):
      dt-binding: bmc: Add NPCM7xx LPC BPC documentation
      misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
      dt-binding: bmc: add npcm7xx pci mailbox document
      misc: mbox: add npcm7xx pci mailbox driver
      dt-binding: net: document NPCM7xx EMC DT bindings
      net: npcm: add NPCM7xx Ethernet MAC controller
      ARM: dts: npcm7xx: Add out of tree nodes
      ARM: dts: olympus: Add non-mainline nodes
      ARM: dts: npcm750: Add fuse regmap support node
      ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
      clk: npcm7xx: add read only flag to divider clocks
      iio: adc: Add calibration support to npcm ADC
      watchdog: npcm: Add DT restart priority and reset type support
      pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
      pinctrl: pinconf: add pin persist configuration
      pinctrl: npcm7xx: Add pin persist configuration support
      spi: npcm-pspi: Add full duplex support
      dt-binding: bmc: add NPCM7XX JTAG master documentation
      misc: Add NPCM7xx JTAG master driver
      watchdog: npcm: Modify get reset status function
      ARM: configs: add defconfig for Nuvoton NPCM7xx BMC

Troy Lee (3):
      dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
      ARM: dts: aspeed: Add AST2600 edac into common devicetree
      edac: Supporting AST2400 and AST2600 edac driver

Change-Id: I455ad0dfa67f7224f07b3999b7e3b50755490653
Signed-off-by: Joel Stanley <joel@jms.id.au>

1 files changed, 3 insertions, 3 deletions

diff --git a/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb b/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb
index 22bc2cfbf..3f63d4e01 100644
--- a/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb
+++ b/meta-nuvoton/recipes-kernel/linux/linux-nuvoton_git.bb
@@ -1,6 +1,6 @@
-KBRANCH ?= "dev-5.8"
-LINUX_VERSION ?= "5.8.17"
+KBRANCH ?= "dev-5.10"
+LINUX_VERSION ?= "5.10.14"
 
-SRCREV="7ee2d5b4d43403537df38d43c29f2a1bcb4dbce4"
+SRCREV="56621ca6dcf8c20fc7bc72771df00cd3d59c153b"
 
 require linux-nuvoton.inc