Add meta-xilinx subtree

Import git://git.yoctoproject.org/meta-xilinx from 5fccc46503 as
meta-xilinx subtree.

Change-Id: I3d59bcf3a57cee588aab7f5cdd0287af66450c8a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

1 files changed, 81 insertions, 0 deletions

diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf
new file mode 100644
index 000000000..d7f19ca6f
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf
@@ -0,0 +1,81 @@
+#@TYPE: Machine
+#@NAME: zcu102-zynqmp
+#@DESCRIPTION: Machine support for ZCU102 Evaluation Board.
+
+SOC_VARIANT ?= "eg"
+
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-overrides.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-board.inc
+require conf/machine/include/machine-xilinx-qemu.inc
+include conf/machine/include/zynqmp-pmu-config.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+
+UBOOT_MACHINE = "xilinx_zynqmp_zcu102_rev1_0_defconfig"
+SPL_BINARY = "spl/boot.bin"
+
+# Default SD image build onfiguration, use qemu-sd to pad
+IMAGE_CLASSES += "image-types-xilinx-qemu"
+IMAGE_FSTYPES += "wic.qemu-sd"
+WKS_FILES ?= "sdimage-bootpart.wks"
+
+SERIAL_CONSOLE = "115200 ttyPS0"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+KERNEL_DEVICETREE = "xilinx/zynqmp-zcu102-rev1.0.dtb"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
+PREFERRED_PROVIDER_virtual/pmu-firmware ?= "zynqmp-pmu-pmu-firmware"
+
+EXTRA_IMAGEDEPENDS += " \
+		u-boot-zynq-uenv \
+		arm-trusted-firmware \
+		qemu-devicetrees \
+		virtual/pmu-firmware \
+		virtual/boot-bin \
+		"
+
+IMAGE_BOOT_FILES += "uEnv.txt atf-uboot.ub ${KERNEL_IMAGETYPE}-zynqmp-zcu102-rev1.0.dtb"
+
+# This machine has a QEMU model, runqemu setup:
+IMAGE_CLASSES += "qemuboot-xilinx"
+QB_MACHINE = "-machine xlnx-zcu102"
+QB_MEM = "-m 4096"
+QB_OPT_APPEND = "-nographic -serial mon:stdio -serial null"
+QB_NETWORK_DEVICE = "-net nic -net nic -net nic -net nic,netdev=net0,macaddr=@MAC@"
+
+# Use qemu-xilinx instead of mainline
+PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native"
+
+# Use the multiarch script instead of launching QEMU directly
+QB_SYSTEM_NAME_append = "-multiarch"
+
+# Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW)
+QB_OPT_APPEND_append_qemuboot-xilinx = " \
+		-hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zcu102-arm.dtb \
+		${@qemu_zynqmp_unhalt(d, True)} \
+		-device loader,file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware.elf,cpu-num=0 \
+		-device loader,file=${DEPLOY_DIR_IMAGE}/u-boot.elf \
+		"
+
+# Attach the rootfs disk image to the second SD interface of QEMU (which is SD0)
+QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd"
+QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=3"
+QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw"
+
+# PMU instance args
+PMU_ROM ?= "${DEPLOY_DIR_IMAGE}/pmu-rom.elf"
+QB_PMU_OPT = " \
+		-M microblaze-fdt \
+		-display none \
+		-hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zynqmp-pmu.dtb \
+		-kernel ${PMU_ROM} \
+		-device loader,file=${DEPLOY_DIR_IMAGE}/pmu-firmware-${MACHINE}.elf \
+		-device loader,addr=0xfd1a0074,data=0x1011003,data-len=4 \
+		-device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4 \
+		"
+QB_OPT_APPEND_append_qemuboot-xilinx = " -pmu-args '${QB_PMU_OPT}'"
+