diff options
author | Patrick Williams <patrick@stwcx.xyz> | 2021-10-26 14:47:53 +0300 |
---|---|---|
committer | Patrick Williams <patrick@stwcx.xyz> | 2021-10-27 00:08:02 +0300 |
commit | b6d590af3f28f1737ff681ed0ed94d812878962c (patch) | |
tree | 59cdd5c1003468ef563cd0b4d0426cf38d04f715 /meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts | |
parent | 7bf39c061342ec43d4fe59d041858515a5afca92 (diff) | |
download | openbmc-b6d590af3f28f1737ff681ed0ed94d812878962c.tar.xz |
meta-xilinx: remove subtree
The meta-xilinx layer was used for a now-deleted EVB. Neither the EVB
nor the meta-xilinx layer have been updated for the Yocto override
syntax change and the meta-xilinx still doesn't have a hardknott or
honister branch (or corresponding support).
I've asked the Xilinx maintainer back in May on when a hardknott
version would be supported and I was told "about a month from now". I
followed up in August and was told "work is in progress". As of today
there are still zero commits in meta-xilinx since January 2021.
As such, I do not believe this layer is well-maintained and we have no
specific use for it anymore. Remove it until someone finds a good
reason to include it and the upstream shows signs of life.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Id14ea55db2ac2779edf42e63cb57ad7d25172ad5
Diffstat (limited to 'meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts')
-rw-r--r-- | meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts deleted file mode 100644 index 6f9b653ab..000000000 --- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts +++ /dev/null @@ -1,98 +0,0 @@ -/dts-v1/; -/include/ "zynq-7000.dtsi" -/include/ "zynq-7000-qspi-dummy.dtsi" - -/ { - model = "Avnet picoZed"; - compatible = "avnet,picozed", "xlnx,zynq-7000"; - - aliases { - ethernet0 = &gem0; - serial0 = &uart1; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x40000000>; - }; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - usb_phy0: phy0 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - reset-gpios = <&gpio0 7 1>; /* MIO 7, GPIO_ACTIVE_LOW */ - }; -}; - -&gem0 { - status = "okay"; - phy-mode = "rgmii-id"; - phy-handle = <ðernet_phy>; - - ethernet_phy: ethernet-phy@0 { - compatible = "marvell,88e1512", "marvell,88e1510"; - device_type = "ethernet-phy"; - reg = <0>; - }; -}; - -&sdhci1 { - status = "okay"; - /* SD1 is onnected to a non-removable eMMC flash device */ - non-removable; -}; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; - usb-phy = <&usb_phy0>; -}; - -&qspi { - status = "okay"; - primary_flash: ps7-qspi@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,m25p80", "spansion,s25fl128s", "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <50000000>; - /* Example 16M partition table using U-Boot + U-Boot SPL */ - partition@0x0 { - label = "boot"; - reg = <0x0 0xe0000>; - }; - partition@0xe0000 { - label = "ubootenv"; - reg = <0xe0000 0x20000>; - }; - partition@0x100000 { - label = "uboot"; - reg = <0x100000 0x100000>; - }; - partition@0x200000 { - label = "kernel"; - reg = <0x200000 0x4f0000>; - }; - partition@0x6f0000 { - label = "devicetree"; - reg = <0x6f0000 0x10000>; - }; - partition@0x700000 { - label = "rootfs"; - reg = <0x700000 0x400000>; - }; - partition@0xb00000 { - label = "spare"; - reg = <0xb00000 0x500000>; - }; - }; -}; - |