diff options
Diffstat (limited to 'import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch')
-rw-r--r-- | import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch b/import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch deleted file mode 100644 index 50227a774..000000000 --- a/import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch +++ /dev/null @@ -1,240 +0,0 @@ -iscsi-initiator-utils to use var for config - -Upstream-status: Backport -This patch is from fedora. - -Use /var/lib/iscsi/ instead of /etc/iscsi/ for holding -state files. - -Signed-off-by: Yao Zhao <yao.zhao@windriver.com> -Signed-off-by: Vu Tran <vu.tran@windriver.com> - -diff --git a/README b/README -index 7364b2d..5e8bff8 100644 ---- a/README -+++ b/README -@@ -164,10 +164,10 @@ available on all Linux installations. - - The database contains two tables: - --- Discovery table (/etc/iscsi/send_targets); --- Node table (/etc/iscsi/nodes). -+- Discovery table (/var/lib/iscsi/send_targets); -+- Node table (/var/lib/iscsi/nodes). - --The regular place for iSCSI database files: /etc/iscsi/nodes -+The regular place for iSCSI database files: /var/lib/iscsi/nodes - - The iscsiadm utility is a command-line tool to manage (update, delete, - insert, query) the persistent database. -@@ -444,7 +444,7 @@ a scsi_host per HBA port). - To manage both types of initiator stacks, iscsiadm uses the interface (iface) - structure. For each HBA port or for software iscsi for each network - device (ethX) or NIC, that you wish to bind sessions to you must create --a iface config /etc/iscsi/ifaces. -+a iface config /var/lib/iscsi/ifaces. - - Prep: - -@@ -478,29 +478,29 @@ Running: - iface0 qla4xxx,00:c0:dd:08:63:e8,20.15.0.7,default,iqn.2005-06.com.redhat:madmax - iface1 qla4xxx,00:c0:dd:08:63:ea,20.15.0.9,default,iqn.2005-06.com.redhat:madmax - --Will report iface configurations that are setup in /etc/iscsi/ifaces. -+Will report iface configurations that are setup in /var/lib/iscsi/ifaces. - The format is: - - iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname - - For software iscsi, you can create the iface configs by hand, but it is - reccomended that you use iscsiadm's iface mode. There is a iface.example in --/etc/iscsi/ifaces which can be used as a template for the daring. -+/var/lib/iscsi/ifaces which can be used as a template for the daring. - - For each network object you wish to bind a session to you must create --a seperate iface config in /etc/iscsi/ifaces and each iface config file -+a seperate iface config in /var/lib/iscsi/ifaces and each iface config file - must have a unique name which is less than or equal to 64 characters. - - Example: - - If you have NIC1 with MAC address 00:0F:1F:92:6B:BF and NIC2 with - MAC address 00:C0:DD:08:63:E7 and you wanted to do software iscsi over --TCP/IP. Then in /etc/iscsi/ifaces/iface0 you would enter: -+TCP/IP. Then in /var/lib/iscsi/ifaces/iface0 you would enter: - - iface.transport_name = tcp - iface.hwaddress = 00:0F:1F:92:6B:BF - --and in /etc/iscsi/ifaces/iface1 you would enter: -+and in /var/lib/iscsi/ifaces/iface1 you would enter: - - iface.transport_name = tcp - iface.hwaddress = 00:C0:DD:08:63:E7 -@@ -550,7 +550,7 @@ cxgb3i.00:07:43:05:97:07 cxgb3i,00:07:43:05:97:07,<empty>,<empty>,<empty> - qla4xxx.00:0e:1e:04:8b:2e qla4xxx,00:0e:1e:04:8b:2e,<empty>,<empty>,<empty> - - --Will report iface configurations that are setup in /etc/iscsi/ifaces. -+Will report iface configurations that are setup in /var/lib/iscsi/ifaces. - The format is: - - iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname -@@ -636,7 +636,7 @@ need a seperate network connection to the target for discovery purposes. - *This will be fixed in the next version of open-iscsi* - - For compatibility reasons, when you run iscsiadm to do discovery, it --will check for interfaces in /etc/iscsi/iscsi/ifaces that are using -+will check for interfaces in /var/lib/iscsi/iscsi/ifaces that are using - tcp for the iface.transport and it will bind the portals that are discovered - so that they will be logged in through those ifaces. This behavior can also - be overriden by passing in the interfaces you want to use. For the case -@@ -654,7 +654,7 @@ we do not bind a session to a iface, then you can use the special iface - - iscsiadm -m discoverydb -t st -p ip:port -I default --discover -P 1 - --And if you did not define any interfaces in /etc/iscsi/ifaces and do -+And if you did not define any interfaces in /var/lib/iscsi/ifaces and do - not pass anything into iscsiadm, running iscsiadm will do the default - behavior, where we allow the network subsystem to decide which - device to use. -@@ -696,7 +696,7 @@ To now log into targets it is the same as with sofware iscsi. See section - - ./iscsiadm -m discoverydb -t st -p 192.168.1.1:3260 --discover - -- This will search /etc/iscsi/send_targets for a record with the -+ This will search /var/lib/iscsi/send_targets for a record with the - ID [portal = 192.168.1.1:3260 and type = sendtargets. If found it - will perform discovery using the settings stored in the record. - If a record does not exist, it will be created using the iscsid.conf -@@ -705,7 +705,7 @@ To now log into targets it is the same as with sofware iscsi. See section - The argument to -p may also be a hostname instead of an address. - ./iscsiadm -m discoverydb -t st -p smoehost --discover - -- For the ifaces, iscsiadm will first search /etc/iscsi/ifaces for -+ For the ifaces, iscsiadm will first search /var/lib/iscsi/ifaces for - interfaces using software iscsi. If any are found then nodes found - during discovery will be setup so that they can logged in through - those interfaces. To specify a specific iface, pass the -@@ -761,7 +761,7 @@ To now log into targets it is the same as with sofware iscsi. See section - This command will perform discovery, but not manipulate the node DB. - - - SendTargets iSCSI Discovery with a specific interface. If you -- wish to only use a subset of the interfaces in /etc/iscsi/ifaces -+ wish to only use a subset of the interfaces in /var/lib/iscsi/ifaces - then you can pass them in during discovery: - - ./iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \ -@@ -1072,8 +1072,8 @@ where targetname is the name of the target and ip_address:port is the address - and port of the portal. tpgt, is the portal group tag of - the portal, and is not used in iscsiadm commands except for static - record creation. And iface name is the name of the iscsi interface --defined in /etc/iscsi/ifaces. If no interface was defined in --/etc/iscsi/ifaces or passed in, the default behavior is used. -+defined in /var/lib/iscsi/ifaces. If no interface was defined in -+/var/lib/iscsi/ifaces or passed in, the default behavior is used. - Default here is iscsi_tcp/tcp to be used over which ever NIC the - network layer decides is best. - -@@ -1188,7 +1188,7 @@ If set, iscsid will perform discovery to the address every - discovery.isns.discoveryd_poll_inval or - discovery.sendtargets.discoveryd_poll_inval seconds, - and it will log into any portals found from the discovery source using --the ifaces in /etc/iscsi/ifaces. -+the ifaces in /var/lib/iscsi/ifaces. - - Note that for iSNS the poll_interval does not have to be set. If not set, - iscsid will only perform rediscovery when it gets a SCN from the server. -diff --git a/doc/iscsiadm.8 b/doc/iscsiadm.8 -index 7c209f6..e94cca0 100644 ---- a/doc/iscsiadm.8 -+++ b/doc/iscsiadm.8 -@@ -89,7 +89,7 @@ This option is only valid for ping submode. - .TP - \fB\-I\fR, \fB\-\-interface=\fI[iface]\fR - The interface argument specifies the iSCSI interface to use for the operation. --iSCSI interfaces (iface) are defined in /etc/iscsi/ifaces. For hardware -+iSCSI interfaces (iface) are defined in /var/lib/iscsi/ifaces. For hardware - iSCSI (qla4xxx) the iface config must have the hardware address - (iface.hwaddress = port's MAC address) - and the driver/transport_name (iface.transport_name). The iface's name is -@@ -166,7 +166,7 @@ If no other options are specified: for \fIdiscoverydb\fR and \fInode\fR, all - of their respective records are displayed; for \fIsession\fR, all active - sessions and connections are displayed; for \fIfw\fR, all boot firmware - values are displayed; for \fIhost\fR, all iSCSI hosts are displayed; and --for \fIiface\fR, all ifaces setup in /etc/iscsi/ifaces are displayed. -+for \fIiface\fR, all ifaces setup in /var/lib/iscsi/ifaces are displayed. - - .TP - \fB\-n\fR, \fB\-\-name=\fIname\fR -@@ -535,10 +535,10 @@ The configuration file read by \fBiscsid\fR and \fBiscsiadm\fR on startup. - The file containing the iSCSI InitiatorName and InitiatorAlias read by - \fBiscsid\fR and \fBiscsiadm\fR on startup. - .TP --/etc/iscsi/nodes/ -+/var/lib/iscsi/nodes/ - This directory contains the nodes with their targets. - .TP --/etc/iscsi/send_targets -+/var/lib/iscsi/send_targets - This directory contains the portals. - - .SH "SEE ALSO" -diff --git a/usr/idbm.c b/usr/idbm.c -index 4d30aa9..316e54f 100644 ---- a/usr/idbm.c -+++ b/usr/idbm.c -@@ -2468,9 +2468,9 @@ free_info: - int idbm_init(idbm_get_config_file_fn *fn) - { - /* make sure root db dir is there */ -- if (access(ISCSI_CONFIG_ROOT, F_OK) != 0) { -- if (mkdir(ISCSI_CONFIG_ROOT, 0660) != 0) { -- log_error("Could not make %s %d\n", ISCSI_CONFIG_ROOT, -+ if (access(ISCSIVAR, F_OK) != 0) { -+ if (mkdir(ISCSIVAR, 0660) != 0) { -+ log_error("Could not make %s %d\n", ISCSIVAR, - errno); - return errno; - } -diff --git a/usr/idbm.h b/usr/idbm.h -index 245f046..f45e86e 100644 ---- a/usr/idbm.h -+++ b/usr/idbm.h -@@ -28,12 +28,16 @@ - #include "config.h" - #include "list.h" - --#define NODE_CONFIG_DIR ISCSI_CONFIG_ROOT"nodes" --#define SLP_CONFIG_DIR ISCSI_CONFIG_ROOT"slp" --#define ISNS_CONFIG_DIR ISCSI_CONFIG_ROOT"isns" --#define STATIC_CONFIG_DIR ISCSI_CONFIG_ROOT"static" --#define FW_CONFIG_DIR ISCSI_CONFIG_ROOT"fw" --#define ST_CONFIG_DIR ISCSI_CONFIG_ROOT"send_targets" -+#define ISCSIVAR "/var/lib/iscsi/" -+ -+#define NODE_CONFIG_DIR ISCSIVAR"nodes" -+#define SLP_CONFIG_DIR ISCSIVAR"slp" -+#define ISNS_CONFIG_DIR ISCSIVAR"isns" -+#define STATIC_CONFIG_DIR ISCSIVAR"static" -+#define FW_CONFIG_DIR ISCSIVAR"fw" -+#define ST_CONFIG_DIR ISCSIVAR"send_targets" -+ -+ - #define ST_CONFIG_NAME "st_config" - #define ISNS_CONFIG_NAME "isns_config" - -diff --git a/usr/iface.h b/usr/iface.h -index 01f7074..2c6ef72 100644 ---- a/usr/iface.h -+++ b/usr/iface.h -@@ -20,7 +20,8 @@ - #ifndef ISCSI_IFACE_H - #define ISCSI_IFACE_H - --#define IFACE_CONFIG_DIR ISCSI_CONFIG_ROOT"ifaces" -+#include "idbm.h" -+#define IFACE_CONFIG_DIR ISCSIVAR"ifaces" - - struct iface_rec; - struct list_head; |