1 files changed, 147 insertions, 0 deletions
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_power_util.sh b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_power_util.sh
new file mode 100644
index 000000000..4ad07a68f
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_power_util.sh
@@ -0,0 +1,147 @@
+#!/bin/bash
+#ampere_platform_config.sh is platform configuration file
+source /usr/sbin/gpio-defs.sh
+
+# Usage of this utility
+function usage() {
+  echo "usage: power-util mb [on|status|cycle|reset|graceful_reset|force_reset|soft_off]";
+}
+
+power_status() {
+  st=$(busctl get-property xyz.openbmc_project.State.Chassis /xyz/openbmc_project/state/chassis0 xyz.openbmc_project.State.Chassis CurrentPowerState | cut -d"." -f6)
+  if [ "$st" == "On\"" ]; then
+  echo "on"
+  else
+  echo "off"
+  fi
+}
+
+shutdown_ack() {
+  if [ -f "/run/openbmc/host@0-softpoweroff" ]; then
+    echo "Receive shutdown ACK triggered after softportoff the host."
+    touch /run/openbmc/host@0-softpoweroff-shutdown-ack
+  else
+    echo "Receive shutdown ACK triggered"
+<<<<<<< HEAD
+  fi
+}
+
+graceful_shutdown() {
+  if [ -f "/run/openbmc/host@0-request" ]; then
+    echo "shutdown host immediately"
+    power_off
+  else
+    echo "Triggering graceful shutdown"
+    gpioset -l 0 49=1
+    sleep 1
+    gpioset -l 0 49=0
+    sleep 30s
+=======
+    sleep 3
+    systemctl start obmc-chassis-poweroff@0.target
+>>>>>>> 397e033ef... meta-ampere: power control: refactor host power control
+  fi
+}
+
+soft_off() {
+  # Trigger shutdown_req
+  touch /run/openbmc/host@0-softpoweroff
+  gpioset -l $GPIO_CHIP0_IDX $S0_SHD_REQ_L=1
+  sleep 1s
+  gpioset -l $GPIO_CHIP0_IDX $S0_SHD_REQ_L=0
+
+  # Wait for shutdown_ack from the host in 30 seconds
+  cnt=30
+  while [ $cnt -gt 0 ];
+  do
+    # Wait for SHUTDOWN_ACK and create the host@0-softpoweroff-shutdown-ack
+    if [ -f "/run/openbmc/host@0-softpoweroff-shutdown-ack" ]; then
+      break
+    fi
+    sleep 1
+    cnt=$((cnt - 1))
+  done
+  # Softpoweroff is successed
+  sleep 2
+  rm -rf /run/openbmc/host@0-softpoweroff
+  if [ -f "/run/openbmc/host@0-softpoweroff-shutdown-ack" ]; then
+    rm -rf /run/openbmc/host@0-softpoweroff-shutdown-ack
+  fi
+  echo 0
+}
+
+force_reset() {
+  if [ -f "/run/openbmc/host@0-softpoweroff" ]; then
+    # In graceful host reset, after trigger os shutdown,
+    # the phosphor-state-manager will call force-warm-reset
+    # in this case the force_reset should wait for shutdown_ack from host
+    cnt=30
+    while [ $cnt -gt 0 ];
+    do
+      if [ -f "/run/openbmc/host@0-softpoweroff-shutdown-ack" ]; then
+        break
+      fi
+      echo "Waiting for shutdown-ack count down $cnt"
+      sleep 1
+      cnt=$((cnt - 1))
+    done
+    # The host OS is failed to shutdown
+    if [ $cnt == 0 ]; then
+      echo "Shutdown-ack time out after 30s."
+      exit 0
+    fi
+  fi
+  echo "Triggering sysreset pin"
+  gpioset -l $GPIO_CHIP0_IDX $S0_SYSRESET_L=1
+  sleep 1
+  gpioset -l $GPIO_CHIP0_IDX $S0_SYSRESET_L=0
+}
+
+if [ $# -lt 2 ]; then
+  echo "Total number of parameter=$#"
+  echo "Insufficient parameter"
+  usage;
+  exit 0;
+fi
+
+if [ $1 != "mb" ]; then
+  echo "Invalid parameter1=$1"
+  usage;
+  exit 0;
+fi
+
+# check if power guard enabled
+dir="/run/systemd/system/"
+file="reboot-guard.conf"
+units=("reboot" "poweroff" "halt")
+for unit in "${units[@]}"; do
+  if [ -f ${dir}${unit}.target.d/${file} ]; then
+    echo "PowerGuard enabled, cannot do power control, exit!!!"
+    exit -1
+  fi
+done
+
+if [ ! -d "/run/openbmc/" ]; then
+  mkdir -p "/run/openbmc/"
+fi
+
+if [ $2 == "shutdown_ack" ]; then
+  shutdown_ack
+elif [ $2 == "status" ]; then
+  power_status
+elif [ $2 == "force_reset" ]; then
+  force_reset
+elif [ $2 == "soft_off" ]; then
+  ret=$(soft_off)
+  if [ $ret == 0 ]; then
+    echo "The host is already softoff"
+  else
+    echo "Failed to softoff the host"
+  fi
+  exit $ret;
+else
+  echo "Invalid parameter2=$2"
+  usage;
+fi
+
+exit 0;