diff options
Diffstat (limited to 'meta-openbmc-mods/meta-ast2500/recipes-bsp/u-boot/files/0038-Increase-default-fan-speed-for-cooper-city.patch')
| -rw-r--r-- | meta-openbmc-mods/meta-ast2500/recipes-bsp/u-boot/files/0038-Increase-default-fan-speed-for-cooper-city.patch | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/meta-openbmc-mods/meta-ast2500/recipes-bsp/u-boot/files/0038-Increase-default-fan-speed-for-cooper-city.patch b/meta-openbmc-mods/meta-ast2500/recipes-bsp/u-boot/files/0038-Increase-default-fan-speed-for-cooper-city.patch new file mode 100644 index 000000000..53cdd763e --- /dev/null +++ b/meta-openbmc-mods/meta-ast2500/recipes-bsp/u-boot/files/0038-Increase-default-fan-speed-for-cooper-city.patch @@ -0,0 +1,131 @@ +From e465945672408b632d5e3c2cf7f08ade1268419e Mon Sep 17 00:00:00 2001 +From: James Feist <james.feist@linux.intel.com> +Date: Thu, 24 Oct 2019 14:39:22 -0700 +Subject: [PATCH 1/1] Increase default fan speed for cooper city + +This increases the uboot fan speed for cooper city +as it has high core count CPUS. + +Tested: In uboot fans appeared to run faster + +Signed-off-by: James Feist <james.feist@linux.intel.com> +--- + board/aspeed/ast-g5/ast-g5-gpio.h | 6 ++++ + board/aspeed/ast-g5/ast-g5-intel.c | 46 ++++++++++++++++++++++++++++++ + 2 files changed, 52 insertions(+) + +diff --git a/board/aspeed/ast-g5/ast-g5-gpio.h b/board/aspeed/ast-g5/ast-g5-gpio.h +index ed2499f5cc..9088cdd3e3 100644 +--- a/board/aspeed/ast-g5/ast-g5-gpio.h ++++ b/board/aspeed/ast-g5/ast-g5-gpio.h +@@ -70,9 +70,15 @@ + #define ID_LED_PORT_PIN PORT_PIN(GPIO_PORT_S, GPIO_PIN_6) + #define GRN_LED_PORT_PIN PORT_PIN(GPIO_PORT_S, GPIO_PIN_4) + #define AMB_LED_PORT_PIN PORT_PIN(GPIO_PORT_S, GPIO_PIN_5) ++#define PLATFORM_ID0_PORT_PIN PORT_PIN(GPIO_PORT_B, GPIO_PIN_0) ++#define PLATFORM_ID1_PORT_PIN PORT_PIN(GPIO_PORT_B, GPIO_PIN_1) ++#define PLATFORM_ID2_PORT_PIN PORT_PIN(GPIO_PORT_B, GPIO_PIN_2) ++#define PLATFORM_ID3_PORT_PIN PORT_PIN(GPIO_PORT_B, GPIO_PIN_3) ++#define PLATFORM_ID4_PORT_PIN PORT_PIN(GPIO_PORT_B, GPIO_PIN_4) + #define FORCE_BMC_UPDATE_PORT_PIN PORT_PIN(GPIO_PORT_D, GPIO_PIN_0) + #define TPM_EN_PULSE_PORT_PIN PORT_PIN(GPIO_PORT_D, GPIO_PIN_6) + #define FP_PWR_BTN_PORT_PIN PORT_PIN(GPIO_PORT_E, GPIO_PIN_2) ++#define PLATFORM_ID5_PORT_PIN PORT_PIN(GPIO_PORT_G, GPIO_PIN_5) + + // GPIO Configuration Register bits + #define GPCFG_EVENT_TO_SMI (1 << 7) // 1 == enabled +diff --git a/board/aspeed/ast-g5/ast-g5-intel.c b/board/aspeed/ast-g5/ast-g5-intel.c +index c58fd3591b..9d5db68b7e 100644 +--- a/board/aspeed/ast-g5/ast-g5-intel.c ++++ b/board/aspeed/ast-g5/ast-g5-intel.c +@@ -25,6 +25,12 @@ enum gpio_names { + GPIO_FF_UPD_JUMPER, + GPIO_ENABLE_TPM_PULSE, + GPIO_FP_PWR_BTN, ++ GPIO_PLATFORM_ID_0, ++ GPIO_PLATFORM_ID_1, ++ GPIO_PLATFORM_ID_2, ++ GPIO_PLATFORM_ID_3, ++ GPIO_PLATFORM_ID_4, ++ GPIO_PLATFORM_ID_5, + }; + + #define GPIO_CFG_DEFAULT (GPCFG_ACTIVE_HIGH | GPCFG_LEVEL_TRIG) +@@ -60,6 +66,21 @@ static const GPIOValue gpio_table[] = { + [GPIO_FP_PWR_BTN] = {FP_PWR_BTN_PORT_PIN, GPIO_CFG_DEFAULT, 0, + GPIO_DEBOUNCE_8MS}, + ++ /* Platform ID Pins */ ++ [GPIO_PLATFORM_ID_0] = {PLATFORM_ID0_PORT_PIN, GPIO_CFG_DEFAULT, 0, ++ GPIO_DEBOUNCE_8MS}, ++ [GPIO_PLATFORM_ID_1] = {PLATFORM_ID1_PORT_PIN, GPIO_CFG_DEFAULT, 0, ++ GPIO_DEBOUNCE_8MS}, ++ [GPIO_PLATFORM_ID_2] = {PLATFORM_ID2_PORT_PIN, GPIO_CFG_DEFAULT, 0, ++ GPIO_DEBOUNCE_8MS}, ++ [GPIO_PLATFORM_ID_3] = {PLATFORM_ID3_PORT_PIN, GPIO_CFG_DEFAULT, 0, ++ GPIO_DEBOUNCE_8MS}, ++ [GPIO_PLATFORM_ID_4] = {PLATFORM_ID4_PORT_PIN, GPIO_CFG_DEFAULT, 0, ++ GPIO_DEBOUNCE_8MS}, ++ [GPIO_PLATFORM_ID_5] = {PLATFORM_ID5_PORT_PIN, GPIO_CFG_DEFAULT, 0, ++ GPIO_DEBOUNCE_8MS}, ++ ++ + }; + + #define LPC_SNOOP_ADDR 0x80 +@@ -114,6 +135,8 @@ static const GPIOValue gpio_table[] = { + #define WATCHDOG_RESET_BIT 0x8 + #define BOOT_FAILURE_LIMIT 0x3 + ++#define COOPER_CITY_BOARD_ID 40 ++ + static int get_boot_failures(void) + { + return getenv_ulong("bootfailures", 10, 0); +@@ -295,6 +318,26 @@ int intel_failed_boot(void) + return get_boot_failures() >= BOOT_FAILURE_LIMIT; + } + ++int intel_get_platform_id(void) ++{ ++ int id = 0; ++ int temp = 0; ++ int gpios[] = {GPIO_PLATFORM_ID_0, ++ GPIO_PLATFORM_ID_1, ++ GPIO_PLATFORM_ID_2, ++ GPIO_PLATFORM_ID_3, ++ GPIO_PLATFORM_ID_4, ++ GPIO_PLATFORM_ID_5}; ++ int ii; ++ for (ii = 0; ii < ARRAY_SIZE(gpios); ii++){ ++ temp = gpio_get_value(gpios[ii]); ++ if(temp < 0) ++ return temp; ++ id |= temp << ii; ++ } ++ return id; ++} ++ + void arch_preboot_os(void) + { + // last second before booting... set the LEDs +@@ -322,6 +365,7 @@ void arch_preboot_os(void) + #define PWM_CLK_ENABLE BIT(0) + #define PWM_DUTY(PCT) (((PCT) * 128) / 100) + #define DEFAULT_PWM_DUTY_VALUE PWM_DUTY(57) ++#define ELEVATED_PWM_DUTY_VALUE PWM_DUTY(80) + + + static inline uint32_t ast_scu_read(uint32_t reg) +@@ -595,6 +639,8 @@ void ast_g5_intel(void) + id_led_control(GPIO_GREEN_LED, EIDLED_Off); + id_led_control(GPIO_AMBER_LED, EIDLED_On); + kcs_init(); ++ if (intel_get_platform_id() == COOPER_CITY_BOARD_ID) ++ set_pwm_duty_cycle(ELEVATED_PWM_DUTY_VALUE); + /* TODO: need to stop the booting here. */ + } + } +-- +2.17.1 + |