summaryrefslogtreecommitdiff
path: root/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0001-arm-dts-add-DTS-for-Intel-platforms.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0001-arm-dts-add-DTS-for-Intel-platforms.patch')
-rw-r--r--meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0001-arm-dts-add-DTS-for-Intel-platforms.patch414
1 files changed, 414 insertions, 0 deletions
diff --git a/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0001-arm-dts-add-DTS-for-Intel-platforms.patch b/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0001-arm-dts-add-DTS-for-Intel-platforms.patch
new file mode 100644
index 000000000..978489110
--- /dev/null
+++ b/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0001-arm-dts-add-DTS-for-Intel-platforms.patch
@@ -0,0 +1,414 @@
+From fbbad6c3a18ec7f1e9d95c09e44e765de303329c Mon Sep 17 00:00:00 2001
+From: Yuan Li <yuan.li@linux.intel.com>
+Date: Tue, 19 Sep 2017 15:55:39 +0800
+Subject: [PATCH] arm: dts: add DTS for Intel platforms
+
+Add the DTS file for Intel systems.
+
+Signed-off-by: Yuan Li <yuan.li@linux.intel.com>
+Signed-off-by: Yong Li <yong.b.li@linux.intel.com>
+Signed-off-by: James Feist <james.feist@linux.intel.com>
+Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
+Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
+---
+ arch/arm/boot/dts/aspeed-bmc-intel-purley.dts | 388 ++++++++++++++++++++++++++
+ 1 file changed, 388 insertions(+)
+ create mode 100644 arch/arm/boot/dts/aspeed-bmc-intel-purley.dts
+
+diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-purley.dts b/arch/arm/boot/dts/aspeed-bmc-intel-purley.dts
+new file mode 100644
+index 0000000..421699c
+--- /dev/null
++++ b/arch/arm/boot/dts/aspeed-bmc-intel-purley.dts
+@@ -0,0 +1,388 @@
++/dts-v1/;
++
++#include "aspeed-g5.dtsi"
++#include <dt-bindings/gpio/aspeed-gpio.h>
++#include <dt-bindings/i2c/i2c.h>
++
++/ {
++ model = "Purley BMC";
++ compatible = "intel,purley-bmc", "aspeed,ast2500";
++
++ aliases {
++ serial4 = &uart5;
++ };
++
++ chosen {
++ stdout-path = &uart5;
++ bootargs = "console=ttyS4,115200 earlyprintk";
++ };
++
++ memory@80000000 {
++ reg = <0x80000000 0x20000000>;
++ };
++
++ reserved-memory {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ vga_memory: framebuffer@7f000000 {
++ no-map;
++ reg = <0x7f000000 0x01000000>;
++ };
++
++ gfx_memory: framebuffer {
++ size = <0x01000000>;
++ alignment = <0x01000000>;
++ compatible = "shared-dma-pool";
++ reusable;
++ };
++
++ video_engine_memory: jpegbuffer {
++ size = <0x02000000>; /* 32M */
++ alignment = <0x01000000>;
++ compatible = "shared-dma-pool";
++ reusable;
++ };
++ };
++
++ vga-shared-memory {
++ compatible = "aspeed,ast2500-vga-sharedmem";
++ reg = <0x9ff00000 0x100000>;
++ };
++
++ iio-hwmon {
++ compatible = "iio-hwmon";
++ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
++ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
++ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
++ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ identify {
++ default-state = "off";
++ gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
++ };
++
++ status_amber {
++ default-state = "off";
++ gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
++ };
++
++ status_green {
++ default-state = "keep";
++ gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ beeper {
++ compatible = "pwm-beeper";
++ pwms = <&timer 5 1000000 0>;
++ };
++};
++
++&fmc {
++ status = "okay";
++ flash@0 {
++ status = "okay";
++ m25p,fast-read;
++#include "openbmc-flash-layout-intel-64MB.dtsi"
++ };
++};
++
++&espi {
++ status = "okay";
++};
++
++&jtag {
++ status = "okay";
++};
++
++&peci0 {
++ status = "okay";
++};
++
++&syscon {
++ uart-clock-high-speed;
++ status = "okay";
++};
++
++&adc {
++ status = "okay";
++};
++
++&gpio {
++ status = "okay";
++ gpio-line-names =
++ /*A0-A7*/ "","","","","","","","",
++ /*B0-B7*/ "","","","","","","","",
++ /*C0-C7*/ "","","","","","","","",
++ /*D0-D7*/ "","","","","","","","",
++ /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
++ /*F0-F7*/ "","","","","","","","",
++ /*G0-G7*/ "","","","","","","","",
++ /*H0-H7*/ "","","","","","","","",
++ /*I0-I7*/ "","","","","","","","",
++ /*J0-J7*/ "","","","","","","","",
++ /*K0-K7*/ "","","","","","","","",
++ /*L0-L7*/ "","","","","","","","",
++ /*M0-M7*/ "","","","","","","","",
++ /*N0-N7*/ "","","","","","","","",
++ /*O0-O7*/ "","","","","","","","",
++ /*P0-P7*/ "","","","","","","","",
++ /*Q0-Q7*/ "","","","","","","","",
++ /*R0-R7*/ "","","","","","","","",
++ /*S0-S7*/ "","","","","","","","",
++ /*T0-T7*/ "","","","","","","","",
++ /*U0-U7*/ "","","","","","","","",
++ /*V0-V7*/ "","","","","","","","",
++ /*W0-W7*/ "","","","","","","","",
++ /*X0-X7*/ "","","","","","","","",
++ /*Y0-Y7*/ "SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
++ /*Z0-Z7*/ "","SIO_POWER_GOOD","","","","","","",
++ /*AA0-AA7*/ "","","","","","","","POST_COMPLETE",
++ /*AB0-AB7*/ "","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
++ /*AC0-AC7*/ "","","","","","","","";
++};
++
++&kcs3 {
++ kcs_addr = <0xCA2>;
++ status = "okay";
++};
++
++&kcs4 {
++ kcs_addr = <0xCA4>;
++ status = "okay";
++};
++
++&lpc_sio {
++ status = "okay";
++};
++
++&lpc_snoop {
++ snoop-ports = <0x80>;
++ status = "okay";
++};
++
++&mbox {
++ status = "okay";
++};
++
++/**
++ * SAFS through SPI1 is available only on Wilson Point.
++ * These pins are used as fan presence checking gpios in WFP
++ * so commenting it out for now.
++ * &spi1 {
++ * status = "okay";
++ *
++ * flash@0 {
++ * m25p,fast-read;
++ * status = "okay";
++ * };
++ *};
++ */
++
++&sgpio {
++ status = "okay";
++};
++
++&uart1 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd1_default
++ &pinctrl_rxd1_default
++ &pinctrl_nrts1_default
++ &pinctrl_ndtr1_default
++ &pinctrl_ndsr1_default
++ &pinctrl_ncts1_default
++ &pinctrl_ndcd1_default
++ &pinctrl_nri1_default>;
++};
++
++&uart2 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd2_default
++ &pinctrl_rxd2_default
++ &pinctrl_nrts2_default
++ &pinctrl_ndtr2_default
++ &pinctrl_ndsr2_default
++ &pinctrl_ncts2_default
++ &pinctrl_ndcd2_default
++ &pinctrl_nri2_default>;
++};
++
++&uart3 {
++ status = "okay";
++};
++
++&uart4 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <>;
++};
++
++&uart5 {
++ status = "okay";
++};
++
++&mac1 {
++ status = "okay";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
++};
++
++&mac0 {
++ status = "okay";
++ use-ncsi;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_rmii1_default>;
++};
++
++&i2c0 {
++ multi-master;
++ general-call;
++ status = "okay";
++
++ ipmb0@10 {
++ compatible = "slave-mqueue";
++ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
++ };
++};
++
++&i2c1 {
++ multi-master;
++ status = "okay";
++};
++
++&i2c2 {
++ multi-master;
++ status = "okay";
++};
++
++&i2c3 {
++ multi-master;
++ status = "okay";
++};
++
++&i2c4 {
++ multi-master;
++ status = "okay";
++
++ hsbp0@10 {
++ compatible = "slave-mqueue";
++ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
++ };
++};
++
++&i2c5 {
++ bus-frequency = <1000000>;
++ multi-master;
++ status = "okay";
++
++ smlink0@10 {
++ compatible = "slave-mqueue";
++ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
++ };
++};
++
++&i2c6 {
++ multi-master;
++ status = "okay";
++};
++
++&i2c7 {
++ multi-master;
++ #retries = <3>;
++ status = "okay";
++};
++
++&i2c9 {
++ multi-master;
++ status = "okay";
++};
++
++&i2c13 {
++ multi-master;
++ status = "okay";
++};
++
++&gfx {
++ status = "okay";
++ memory-region = <&gfx_memory>;
++};
++
++&vuart {
++ status = "okay";
++};
++
++&pwm_tacho {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
++ &pinctrl_pwm2_default &pinctrl_pwm3_default
++ &pinctrl_pwm4_default &pinctrl_pwm5_default
++ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
++
++ fan@0 {
++ reg = <0x00>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
++ };
++ fan@1 {
++ reg = <0x01>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
++ };
++ fan@2 {
++ reg = <0x02>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
++ };
++ fan@3 {
++ reg = <0x03>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
++ };
++ fan@4 {
++ reg = <0x04>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
++ };
++ fan@5 {
++ reg = <0x05>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
++ };
++ fan@6 {
++ reg = <0x06>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
++ };
++ fan@7 {
++ reg = <0x07>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
++ };
++
++};
++
++&timer {
++/*
++ * Available settings:
++ * fttmr010,pwm-outputs = <5>, <6>, <7>, <8>;
++ * pinctrl-0 = <&pinctrl_timer5_default &pinctrl_timer6_default
++ * &pinctrl_timer7_default &pinctrl_timer8_default>;
++ */
++ fttmr010,pwm-outputs = <5>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_timer5_default>;
++ #pwm-cells = <3>;
++ status = "okay";
++};
++
++&video {
++ status = "okay";
++ memory-region = <&video_engine_memory>;
++};
++
++&vhub {
++ status = "okay";
++};
+--
+2.7.4
+
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-03 14:39:53 +0300