1 files changed, 0 insertions, 80 deletions
diff --git a/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0006-Allow-monitoring-of-power-control-input-GPIOs.patch b/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0006-Allow-monitoring-of-power-control-input-GPIOs.patch
deleted file mode 100644
index c1207055d..000000000
--- a/meta-openbmc-mods/meta-ast2500/recipes-kernel/linux/linux-aspeed/0006-Allow-monitoring-of-power-control-input-GPIOs.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 029cf5d5ff436ea14ab2d33da32238910be0a8b2 Mon Sep 17 00:00:00 2001
-From: "Jason M. Bills" <jason.m.bills@linux.intel.com>
-Date: Fri, 24 May 2019 12:42:59 -0700
-Subject: [PATCH] Allow monitoring of power control input GPIOs
-
-The pass-through input GPIOs cannot be monitored because when
-requested, pass-through is disabled which causes a change on the
-pass-through output.
-
-The SIO GPIOs cannot be monitored because when requested, the
-request is rejected based on the value of the ACPI strap.
-
-This change removes the register check condition from the pass-
-through and desired SIO GPIOs so they can be requsted and
-monitored from power control.
-
-Tested:
-For pass-through, I used gpioset to hold a request on the input
-GPIOs and confirmed that pass-through remained enabled.
-
-For SIO, I used gpioget to confirm that I can successfully request
-and read the GPIO value.
-
-Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
----
- drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
-index fbc9a68bd88c..6f151e7c8d81 100644
---- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
-+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
-@@ -272,7 +272,7 @@ FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
- 
- #define B20 32
- SIG_EXPR_LIST_DECL_SINGLE(NCTS3, NCTS3, SIG_DESC_SET(SCU80, 16));
--SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
-+SIG_EXPR_DECL(GPIE0IN, GPIE0);
- SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
- SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
- MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
-@@ -292,7 +292,7 @@ FUNC_GROUP_DECL(GPIE0, B20, C20);
- 
- #define F18 34
- SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
--SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
-+SIG_EXPR_DECL(GPIE2IN, GPIE2);
- SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
- SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
- MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
-@@ -1371,7 +1371,7 @@ FUNC_GROUP_DECL(ADC15, H4);
- 
- #define R22 192
- SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
--SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
-+SIG_EXPR_DECL(SIOS3, ACPI);
- SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
- SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
- MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
-@@ -1379,7 +1379,7 @@ FUNC_GROUP_DECL(SIOS3, R22);
- 
- #define R21 193
- SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
--SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
-+SIG_EXPR_DECL(SIOS5, ACPI);
- SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
- SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
- MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
-@@ -1395,7 +1395,7 @@ FUNC_GROUP_DECL(SIOPWREQ, P22);
- 
- #define P21 195
- SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
--SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
-+SIG_EXPR_DECL(SIOONCTRL, ACPI);
- SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
- SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
- MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
--- 
-2.7.4
-