diff options
Diffstat (limited to 'meta-openbmc-mods/meta-common/recipes-phosphor/dbus/phosphor-dbus-interfaces/0020-Create-dbus-interface-for-SOL-commands.patch')
| -rw-r--r-- | meta-openbmc-mods/meta-common/recipes-phosphor/dbus/phosphor-dbus-interfaces/0020-Create-dbus-interface-for-SOL-commands.patch | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/meta-openbmc-mods/meta-common/recipes-phosphor/dbus/phosphor-dbus-interfaces/0020-Create-dbus-interface-for-SOL-commands.patch b/meta-openbmc-mods/meta-common/recipes-phosphor/dbus/phosphor-dbus-interfaces/0020-Create-dbus-interface-for-SOL-commands.patch new file mode 100644 index 000000000..68d2c92b7 --- /dev/null +++ b/meta-openbmc-mods/meta-common/recipes-phosphor/dbus/phosphor-dbus-interfaces/0020-Create-dbus-interface-for-SOL-commands.patch @@ -0,0 +1,76 @@ +From 2820ca36ab21c52341cdbde477756f960eaeb68b Mon Sep 17 00:00:00 2001 +From: Cheng C Yang <cheng.c.yang@intel.com> +Date: Wed, 13 Mar 2019 11:19:07 +0800 +Subject: [PATCH] Create dbus interface for SOL commands + +Create dbus properties for Set/Get SOL config parameter command. +Some platforms need to call Set/Get SOL config parameter command +through KCS, and since sol manager in net-ipmid cannot be accessed +by commands in host-ipmid, need to create a dbus interface in +phospher-settings to transfer properties from host-ipmid to +net-ipmid. + +TestedBy: +With the related code change in net-ipmid, busctl introspect +xyz.openbmc_project.Ipmi.SOL /xyz/openbmc_project/SOL +can show all the properties needed. + +Signed-off-by: Cheng C Yang <cheng.c.yang@intel.com> +--- + xyz/openbmc_project/Ipmi/SOL.interface.yaml | 44 ++++++++++++++++++++++++++ + 1 file changed, 44 insertions(+) + create mode 100644 xyz/openbmc_project/Ipmi/SOL.interface.yaml + +diff --git a/xyz/openbmc_project/Ipmi/SOL.interface.yaml b/xyz/openbmc_project/Ipmi/SOL.interface.yaml +new file mode 100644 +index 0000000..94db59f +--- /dev/null ++++ b/xyz/openbmc_project/Ipmi/SOL.interface.yaml +@@ -0,0 +1,44 @@ ++description: > ++ SOL properties use for Get/Set SOL config parameter command in host-ipmid ++ sending config to SOL process in net-ipmid. ++ Since some platforms need to access Get/Set SOL config parameter command ++ through KCS, and current sol manager is implemented in net-ipmid and ++ cannot be accessed by host-ipmid, add a dbus interface for host-ipmid ++ command to transfer properties to net-ipmid. ++ This interface will be implemented in phosphor-settings. ++properties: ++ - name: Progress ++ type: byte ++ description: > ++ Set In Progress property, indicate when any parameters are being ++ updated. ++ - name: Enable ++ type: boolean ++ description: > ++ SOL Enable property, this controls whether the SOL payload type ++ can be activated. ++ - name: Authentication ++ type: byte ++ description: > ++ If SOL enable Force Payload Encryption and Authenticaton. ++ And the minimun operating privilege level SOL required. ++ - name: AccumulateIntervalMS ++ type: byte ++ description: > ++ Character Accumulate Interval in 5ms increments. ++ BMC will wait this time before transmitting a packet. ++ - name: Threshold ++ type: byte ++ description: > ++ BMC will automatically send an SOL character data packet containing ++ this number of characters as soon as this number of characters ++ (or greater) has been accepted from the baseboard serial controller. ++ - name: RetryCount ++ type: byte ++ description: > ++ Packet will be dropped if no ACK/NACK received by time retries ++ expire. ++ - name: RetryIntervalMS ++ type: byte ++ description: > ++ Retry Interval in 10ms increments. +-- +2.16.2 + |