diff options
Diffstat (limited to 'meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf')
| -rw-r--r-- | meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf | 74 |
1 files changed, 0 insertions, 74 deletions
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf deleted file mode 100644 index 2c890cfb8..000000000 --- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu102-zynqmp.conf +++ /dev/null @@ -1,74 +0,0 @@ -#@TYPE: Machine -#@NAME: zcu102-zynqmp -#@DESCRIPTION: Machine support for ZCU102 Evaluation Board. - -require conf/machine/include/soc-zynqmp.inc -require conf/machine/include/machine-xilinx-default.inc -require conf/machine/include/machine-xilinx-qemu.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_virt_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -# Default SD image build onfiguration, use qemu-sd to pad -IMAGE_CLASSES += "image-types-xilinx-qemu" -IMAGE_FSTYPES += "wic.qemu-sd" -WKS_FILES ?= "sdimage-bootpart.wks" - -SERIAL_CONSOLES ?= "115200;ttyPS0" - -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu102-rev1.0.dtb" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - qemu-devicetrees \ - virtual/boot-bin \ - virtual/bootloader \ - u-boot-zynq-scr \ - " - -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/dtb', 'device-tree', 'system.dtb', '', d)} \ - boot.scr \ - " - -# This machine has a QEMU model, runqemu setup: -QB_MEM = "-m 4096" -QB_OPT_APPEND ?= "-nographic -serial mon:stdio -serial null" -QB_NETWORK_DEVICE = "-net nic -net nic -net nic -net nic,netdev=net0,macaddr=@MAC@" - -# Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW) -QB_OPT_APPEND_append_qemuboot-xilinx = " \ - -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zcu102-arm.dtb \ - ${@qemu_zynqmp_unhalt(d, True)} \ - -device loader,file=${DEPLOY_DIR_IMAGE}/arm-trusted-firmware.elf,cpu-num=0 \ - -device loader,file=${DEPLOY_DIR_IMAGE}/u-boot.elf \ - -device loader,file=${DEPLOY_DIR_IMAGE}/system.dtb,addr=0x100000 \ - " - -# Attach the rootfs disk image to the second SD interface of QEMU (which is SD0) -QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd" -QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5" -QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" - -# PMU instance args -PMU_ROM ?= "${DEPLOY_DIR_IMAGE}/pmu-rom.elf" -PMU_FIRMWARE_DEPLOY_DIR ?= "${@ '${TOPDIR}/pmutmp/deploy/images/microblaze-pmu' if d.getVar('BBMULTICONFIG') == 'pmu' else '${TOPDIR}/tmp/deploy/images/${MACHINE}'}" -PMU_FIRMWARE_IMAGE_NAME ?= "${@ 'pmu-firmware-microblaze-pmu' if d.getVar('BBMULTICONFIG') == 'pmu' else 'pmu-zcu102-zynqmp'}" - -QB_PMU_OPT = " \ - -M microblaze-fdt \ - -display none \ - -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/zynqmp-pmu.dtb \ - -kernel ${PMU_ROM} \ - -device loader,file=${PMU_FIRMWARE_DEPLOY_DIR}/${PMU_FIRMWARE_IMAGE_NAME}.elf \ - -device loader,addr=0xfd1a0074,data=0x1011003,data-len=4 \ - -device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4 \ - " -QB_OPT_APPEND_append_qemuboot-xilinx = " -pmu-args '${QB_PMU_OPT}'" - -do_write_qemuboot_conf[depends] += "u-boot-zynq-uenv:do_deploy" |