summaryrefslogtreecommitdiff
path: root/meta-ampere/meta-common/recipes-phosphor
AgeCommit message (Collapse)AuthorFilesLines
2021-12-30meta-ampere: redfish: remove Chassis chassis instanceThang Q. Nguyen2-0/+33
The chassis instance when implementing sensor monitor using dbus-sensor/entity-manager is /redfish/v1/Chassis/<name> where <name> is defined from entity-manager configuration. This commit removes /redfish/v1/Chassis/chassis which is redundant and make incorrect link from other schema like ComputerSystem and BMC Manager. Tested: 1. Check no /redfish/v1/Chassis/chassis available. 2. Check all sensors are available in /redfish/v1/Chassis/Mt_Jade. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I334a94bb65c3caa49d0bcb6ab03a42f7999728d5
2021-12-16meta-ampere: mtjade: fru: use dynamic sensorsThang Q. Nguyen1-0/+9
Change to use dynamic sensors for FRU support to take advantage of IPMI fru read/write commands. Tested: 1. Check FRU reading $ ipmitool fru print 2. Write fru.bin into FRU EEPROM Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Signed-off-by: Thang Tran <thuutran@amperecomputing.com> Change-Id: I0d0b52ae7b0fd301a14d0d2894268637d867a5b8
2021-11-05meta-ampere: usbnet: implement using usb-ctrlThang Q. Nguyen4-0/+68
Change to implement virtual USB Ethernet using phosphor-misc's usb-ctrl. Tested: 1. Boot BMC to Linux. Login and check if usb0 ethernet interface exists. 2. Power ON the Host. Check if usb0 automatically sets its IP to 192.168.0.10 3. Restart the ampere-usbnet.service service. Check if no error happens. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I4de722a691a112db851b6dda0a7821b9f78b4d72
2021-11-04meta-ampere: fix shellcheck issuesThang Q. Nguyen1-20/+17
Fix all issues from the shellcheck checked on bash shells under meta-ampere. Tested: Verify the following features: 1. Power control (on,off, cycle, graceful shutdown, hard reset). 2. UART switching. 3. UEFI firmware update. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Idabf839b7521ecadb642230cc8bb3472c787002e
2021-10-26ampere-ipmi-oem: srcrev bump 1463f7013a..4c556399c7Andrew Geissler1-1/+1
Manojkiran Eda (1): Add OWNERS file Change-Id: I60701ca35fc2027fa31db97029d846f9efacc31c Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-09-25meta-ampere: enable ampere-ipmi-oem repoHieu Huynh1-0/+32
Adds the ampere-ipmi-oem.bb file to support ampere-ipmi-oem features. Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com> Change-Id: I869a3e73573dd43103b52640ef3ac2d1912280dc
2021-09-25meta-ampere: mtjade: clean up unused codesThang Q. Nguyen3-29/+2
There are some redundant codes inside meta-mtjade: - ampere-reset-host-check@.service: no longer be used. - redundant :mtjade in phosphor-software-manager_%.bbappend - Incorrect GPIO function call in ampere_platform_init.sh This commit fixes the above issues. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Iadde88ba6472815556a2c0839c1e3e127c2a04d4
2021-09-20meta-ampere: enable smbios-mdrHieu Huynh1-0/+3
Enable support for smbios-mdr using IPMI BLOB transport protocol, and disable the cpuinfo feature. Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com> Change-Id: I0ed7ff78ba3910ab60018e0b8f55b14a22fcbb2a
2021-09-17meta-ampere: fwupdate: detect Host FW to flashChanh Nguyen3-3/+115
Support a wrapper script to detect the Host firmware image by checking the ExtendedVersion field from the MANIFEST file to flash into the appropriate device components. The supported image type include: - ExtendedVersion=secondary: flash to secondary Host SPI-NOR - ExtendedVersion=scp-primary: flash to primary Boot EEPROM - ExtendedVersion=scp-secondary: flash to alternative Boot EEPROM - ExtendedVersion=fru: write to the FRU EEPROM. Tested: 1. Flash UEFI firmware into the primary Host SPI-NOR via WebUI 2. Flash UEFI firmware into the secondary Host SPI-NOR via WebUI Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: I7dff2ca0f8b9de85c2cbac1a49d04b6e14721a03
2021-09-07meta-ampere: Disable unsecured TFTP firmware updateHieu Huynh1-1/+1
Disable this option to does not support TFTP firmware update as it is an unsecured protocol. Tested: 1. On Webui, Configuration -> Firmware. No more option TFTP server on Update firmware. Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com> Change-Id: I8cb3285154b62ac2ee026485ad3f1d9d9586a016
2021-09-02meta-phosphor: change systemd.bbclass to match upstream override syntaxPatrick Williams1-1/+1
Upstream bbclasses changed to typically use the `:${PN}` override syntax, including the SYSTEMD_ variables. Change our systemd.bbclass to do the same for consistency and perform a tree-wide variable replacement. Spot checked by building bletchley and witherspoon and checking some of the SYSTEMD_LINK directives on installed packages under qemu. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
2021-08-13meta-ampere: fix compilation error with latest YoctoThang Q. Nguyen1-1/+3
Make the following changes to fix compilation errors: 1. Add honister to LAYERSERIES_COMPAT 2. Increase CONF_VERSION to 2. 3. Fix mistake on previous change on Yocto syntax update. Tested: 1. Compile OpenBMC for Mt.Jade without error. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I5ac3f568d776109955759fab78844b1d38a51af1
2021-08-07meta-ampere: Cleanup for Yocto override syntax changeThang Q. Nguyen5-11/+11
Run convert-overrides.py meta-ampere and update missing changes as below: - Change all _mtjade to :mtjade - Change all _${PN} to :${PN} Tested: 1. Check compilation without problem. 2. Check basic functions like switch UART mux, power control. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
2021-08-04meta-ampere: host-check: overide phosphor-reset-host-checkThuBaNguyen2-0/+26
When BMC boots, phosphor-host-check uses the software interfaces(IPMI inband Hearbeat command or PLDM interface) to verify the host state and creates the host on indicator file. Ampere Altra SoCs do not support those software interfaces. They use the GPIO interface. GPIO pin S0_FW_BOOT_OK go high when the host is on. This commit appends ampere-reset-host-check@.service to phosphor-state-manager This service will replaces the role of phosphor-reset-host-check@.service. Tested: 1. Boot up BMC with the host is off/on. 2. Verify the CurrentHostState. Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com> Change-Id: Ie4f73538266fff7d8c5fd40b437ffebc82cb12c5
2021-08-04meta-ampere: power control: refactor host power controlThuBaNguyen1-11/+0
Refactor the Mt.Jade Host power control operations to support Altra CPU following the Altra SoC BMC Interface specification which still satisfying the OpenBMC power control framework. Tested: check the below cases and ensure Host state report correctly: 1. Run "reboot" from Host Linux. Check the Host is graceful shutdown, then SYS_RESET is asserted and the Host is booted. 2. Run "shutdown" from Host Linux. Check the Host is graceful shutdown then the chassis power is turned OFF. 3. Run "ipmitool chassis power soft". Check the Host is graceful shutdown 4. Execute Redfish GracefulShutdown. Check the Host is graceful shutdown then the chassis power is turned OFF. 5. Execute Redfish GracefulRestart. Check the Host is graceful shutdown then turned ON. 6. Check other IPMI chassis power and Redfish Reset actions work. Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com> Change-Id: I3a9716f37d7e80bdc1a1d0422e561c8fc51ad040
2021-08-04meta-ampere: power control: refactor power soft/off functionsThuBaNguyen1-8/+0
The current ampere-hostctl package removes the power off/on services of phosphor-state-manager and uses Ampere services. This solution is not correct. Ampere platform should use power control functions of phosphor-state-manager. And only appends or overides the default services by Ampere's services if need. By default, to handle power soft action, phosphor-state-manager will trigger obmc-host-shutdown@0.target. This target then call xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service to request OS shutdown. When the host OS shutdown is already done, the target will trigger obmc-chassis-poweroff@0.target to turn off the chassis. The default xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service uses Ipmi inband to communicate with the host. It is different with Ampere Mt.Jade platform. We use the GPIO pin SHD_REQ to request shutdown the host OS. The host will trigger SHD_ACK when shutdown is done. So *.Ipmi.Internal.SoftPowerOff.service will be overide by Ampere service named ampere.*.Ipmi.Internal.SoftPowerOff.service. This service will trigger SHD_REQ pin and wait for SHD_ACK before start obmc-chassis-poweroff@0.target. This commit removes ampere-chassis-poweroff, ampere-host-shutdown serives which handle power off/soft actions and restore phosphor-state-manager's services. It also supports ampere.xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service which will overide xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service. Tested: 1. Create "power soft" actions use ipmitool, redfish and BMC web. 2. Make sure the power order will be shutdown the host then power of the chassis. 3. Create "power off" actions use ipmitool, redfish and BMC web. 4. Make sure the power action will be power off the chassis. Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com> Change-Id: Ibc0dc8c62408e8282520c9b70e41ab75c10137f6
2021-07-30meta-ampere: phosphor-sel-logger: Use packageconfigWilliam A. Kennington III1-2/+1
This makes it possible for us to change out build specific settings. Change-Id: I862366d8efa97c4c3181b842662bf28dd5bec270 Signed-off-by: William A. Kennington III <wak@google.com>
2021-07-28meta-ampere: network: enable nic-ethtoolHieu Huynh1-0/+1
The SpeedMbds of ethernet interface is implemented in getInterfaceInfo() from the phosphor-networkd repo. It is disabled by NIC_SUPPORTS_ETHTOOL conditional compilation. The default compile mode is to omit the getInterfaceInfo() which causes the SpeedMbps not set. This commit supports enable the NIC_SUPPORTS_ETHTOOL to report correct speed. Tested: 1.Get SpeedMbps via rest: $ curl -XGET --user root:0penBmc -H "Content-Type: application/json" \ -H "If-match: *" --insecure \ https://10.38.14.2/redfish/v1/Managers/bmc/EthernetInterfaces/eth1 \ grep | "SpeedMbps" 2.Get speed of eth1 interface on BMC console $ cat /sys/class/net/eth1/speed The value getting from openbmc#1 and openbmc#2 match together. Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com> Change-Id: I57047151fc4eea08c857b95c0770d89ba95f9bc7
2021-02-01meta-ampere: support Redfish event logThang Q. Nguyen2-0/+9
Enable system event log for Redfish. It includes the setting to: - Enable sel-logger module which logs the sensor event into the systemd log. - Enable the rsyslog (intel module) to sync the sensor events from systemd to /var/log/redfish. The file will be used by Redfish. - Configure the backend and redfish to get the system log from the /var/log/redfish instead of system d-bus - Enable Redfish journal log Tested: Verify event logs appear in: 1. Redfish: /redfish/v1/Systems/system/LogServices/EventLog/Entries 2. Redfish: /redfish/v1/Managers/bmc/LogServices/Journal/Entries 3. WebUI: /server-health/sys-log at Event type. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I3753e2932ec1dc83cdbe0708173531930df65254
2021-02-01meta-ampere: mtjade: Add Host firmware update supportThang Q. Nguyen2-0/+14
Enable flash_bios feature and configure to use backend script to flash UEFI firmware via Redfish, WebUI and Rest. Tested: 1. Flash UEFI firmware via WebUI. 2. Flash UEFI firmware via Redfish UpdateService 3. Flash UEFI firmware via Rest interface. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
2021-02-01meta-ampere: Support Ampere power controlTung Nguyen2-0/+26
Implement the Ampere power control requirements for Altra system. Tested: - Check the ipmi commands: ipmi power on/off/soft/reset/cycle - Check the redfish commands: On, Off, ForceOn, ForceOff, GracefulShutdown, GracefulRestart, ForceRestart, PowerCycle Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com> Change-Id: Id0c64c1284a6338ce47ca720d0ef75e99d21aa3c
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-27 21:05:55 +0300