| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support SCP firmware update with checking if the ampere_fru_upgrade
available to execute the update.
This commit also supports 2nd Host SPI-NOR update ability.
Tested:
1. Manually copy ampere_fru_upgrade to the /usr/sbin folder and run SCP
firmware update via Redfish.
2. Flash UEFI firmware update on the secondary Host SPI-NOR.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ic335ee2d21625239c3df1937ed5333708233845b
|
|
Fix all issues from the shellcheck checked on bash shells under
meta-ampere.
Tested: Verify the following features:
1. Power control (on,off, cycle, graceful shutdown, hard reset).
2. UART switching.
3. UEFI firmware update.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Idabf839b7521ecadb642230cc8bb3472c787002e
|
|
UEFI firmware for Ampere Altra-based platform starts at offset 0x400000
but currently the firmware image is flashed start at offset 0. This
makes the Host fail to boot.
This commit supports offset option for the mtd-util's flashcp utility
and update the script to flash UEFI firmware starting at offset
0x400000.
Tested:
1. Turn on the Host.
2. Flash UEFI firmware. Wait for the flash complete and check if Host
can boot successfully.
4. Turn off the Host.
5. Flash UEFI firmware. Wait for the flash complete.
6. Turn on the Host and check if Host can boot successfully.
Signed-off-by: Tung Nguyen <tung.nguyen@amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I0d48bfd0a7b7350b46a98bf10fe4de3887f09f02
|
|
Enable flash_bios feature and configure to use backend script to flash
UEFI firmware via Redfish, WebUI and Rest.
Tested:
1. Flash UEFI firmware via WebUI.
2. Flash UEFI firmware via Redfish UpdateService
3. Flash UEFI firmware via Rest interface.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
|
