1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
|
From 2e834ae04eba975066f80102c6f4656da314ca1e Mon Sep 17 00:00:00 2001
From: "Jason M. Bills" <jason.m.bills@linux.intel.com>
Date: Fri, 24 May 2019 12:42:59 -0700
Subject: [PATCH] Allow monitoring of power control input GPIOs
The pass-through input GPIOs cannot be monitored because when
requested, pass-through is disabled which causes a change on the
pass-through output.
The SIO GPIOs cannot be monitored because when requested, the
request is rejected based on the value of the ACPI strap.
This change removes the register check condition from the pass-
through and desired SIO GPIOs so they can be requsted and
monitored from power control.
Tested:
For pass-through, I used gpioset to hold a request on the input
GPIOs and confirmed that pass-through remained enabled.
For SIO, I used gpioget to confirm that I can successfully request
and read the GPIO value.
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
---
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index beb0729..05d1081 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -250,7 +250,7 @@ FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
#define B20 32
SIG_EXPR_LIST_DECL_SINGLE(NCTS3, NCTS3, SIG_DESC_SET(SCU80, 16));
-SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
+SIG_EXPR_DECL(GPIE0IN, GPIE0);
SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
@@ -270,7 +270,7 @@ FUNC_GROUP_DECL(GPIE0, B20, C20);
#define F18 34
SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
-SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2IN, GPIE2);
SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
@@ -1349,7 +1349,7 @@ FUNC_GROUP_DECL(ADC15, H4);
#define R22 192
SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
-SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_DECL(SIOS3, ACPI);
SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
@@ -1357,7 +1357,7 @@ FUNC_GROUP_DECL(SIOS3, R22);
#define R21 193
SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
-SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_DECL(SIOS5, ACPI);
SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
@@ -1373,7 +1373,7 @@ FUNC_GROUP_DECL(SIOPWREQ, P22);
#define P21 195
SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
-SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_DECL(SIOONCTRL, ACPI);
SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
--
2.7.4
|
