1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
From a5bbf0f5943d3a6be6e58a4b78d6d18694ceb859 Mon Sep 17 00:00:00 2001
From: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Date: Wed, 13 Mar 2019 15:27:48 -0700
Subject: [PATCH] misc: Add clock control logic into Aspeed LPC SNOOP driver
If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC
SNOOP block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupt in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub-nodes should enable LCLK
individually so this patch adds clock control logic into the LPC
SNOOP driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
drivers/soc/aspeed/aspeed-lpc-snoop.c | 30 +++++++++++++++++++++++++++---
3 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index c2388bb7c678..70aca75d65e0 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -320,6 +320,7 @@
compatible = "aspeed,ast2400-lpc-snoop";
reg = <0x0 0x80>;
interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 88b318fd287b..f4a5d06f1000 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -453,6 +453,7 @@
compatible = "aspeed,ast2500-lpc-snoop";
reg = <0x0 0x80>;
interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
index 48f7ac238861..96ea52db25be 100644
--- a/drivers/soc/aspeed/aspeed-lpc-snoop.c
+++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c
@@ -11,6 +11,7 @@
*/
#include <linux/bitops.h>
+#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/kfifo.h>
@@ -67,6 +68,7 @@ struct aspeed_lpc_snoop_channel {
struct aspeed_lpc_snoop {
struct regmap *regmap;
int irq;
+ struct clk *clk;
struct aspeed_lpc_snoop_channel chan[NUM_SNOOP_CHANNELS];
};
@@ -282,22 +284,42 @@ static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
return -ENODEV;
}
+ lpc_snoop->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(lpc_snoop->clk)) {
+ rc = PTR_ERR(lpc_snoop->clk);
+ if (rc != -EPROBE_DEFER)
+ dev_err(dev, "couldn't get clock\n");
+ return rc;
+ }
+ rc = clk_prepare_enable(lpc_snoop->clk);
+ if (rc) {
+ dev_err(dev, "couldn't enable clock\n");
+ return rc;
+ }
+
rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev);
if (rc)
- return rc;
+ goto err;
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
if (rc)
- return rc;
+ goto err;
/* Configuration of 2nd snoop channel port is optional */
if (of_property_read_u32_index(dev->of_node, "snoop-ports",
1, &port) == 0) {
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
- if (rc)
+ if (rc) {
aspeed_lpc_disable_snoop(lpc_snoop, 0);
+ goto err;
+ }
}
+ return 0;
+
+err:
+ clk_disable_unprepare(lpc_snoop->clk);
+
return rc;
}
@@ -309,6 +331,8 @@ static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
aspeed_lpc_disable_snoop(lpc_snoop, 0);
aspeed_lpc_disable_snoop(lpc_snoop, 1);
+ clk_disable_unprepare(lpc_snoop->clk);
+
return 0;
}
--
2.7.4
|
