diff options
Diffstat (limited to 'static/redfish/v1/JsonSchemas/SerialInterface/SerialInterface.json')
| -rw-r--r-- | static/redfish/v1/JsonSchemas/SerialInterface/SerialInterface.json | 86 |
1 files changed, 45 insertions, 41 deletions
diff --git a/static/redfish/v1/JsonSchemas/SerialInterface/SerialInterface.json b/static/redfish/v1/JsonSchemas/SerialInterface/SerialInterface.json index 58810c4d12..6a9607070e 100644 --- a/static/redfish/v1/JsonSchemas/SerialInterface/SerialInterface.json +++ b/static/redfish/v1/JsonSchemas/SerialInterface/SerialInterface.json @@ -1,14 +1,15 @@ { + "$id": "http://redfish.dmtf.org/schemas/v1/SerialInterface.v1_1_5.json", "$ref": "#/definitions/SerialInterface", "$schema": "http://redfish.dmtf.org/schemas/v1/redfish-schema-v1.json", - "copyright": "Copyright 2014-2018 DMTF. For the full DMTF copyright policy, see http://www.dmtf.org/about/policies/copyright", + "copyright": "Copyright 2014-2019 DMTF. For the full DMTF copyright policy, see http://www.dmtf.org/about/policies/copyright", "definitions": { "Actions": { "additionalProperties": false, - "description": "The available actions for this resource.", - "longDescription": "This type shall contain the available actions for this resource.", + "description": "The available actions for this Resource.", + "longDescription": "This type shall contain the available actions for this Resource.", "patternProperties": { - "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_.]+$": { + "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { "description": "This property shall specify a valid odata or Redfish property.", "type": [ "array", @@ -24,8 +25,9 @@ "properties": { "Oem": { "$ref": "#/definitions/OemActions", - "description": "This property contains the available OEM specific actions for this resource.", - "longDescription": "This property shall contain any additional OEM actions for this resource." + "description": "The available OEM-specific actions for this Resource.", + "longDescription": "This property shall contain the available OEM-specific actions for this Resource.", + "versionAdded": "v1_1_0" } }, "type": "object" @@ -88,10 +90,10 @@ "8" ], "enumDescriptions": { - "5": "5 bits of data following the start bit.", - "6": "6 bits of data following the start bit.", - "7": "7 bits of data following the start bit.", - "8": "8 bits of data following the start bit." + "5": "Five bits of data following the start bit.", + "6": "Six bits of data following the start bit.", + "7": "Seven bits of data following the start bit.", + "8": "Eight bits of data following the start bit." }, "type": "string" }, @@ -102,7 +104,7 @@ "Hardware" ], "enumDescriptions": { - "Hardware": "Out of band flow control imposed.", + "Hardware": "Out-of-band flow control imposed.", "None": "No flow control imposed.", "Software": "XON/XOFF in-band flow control imposed." }, @@ -110,10 +112,10 @@ }, "OemActions": { "additionalProperties": true, - "description": "The available OEM specific actions for this resource.", - "longDescription": "This type shall contain any additional OEM actions for this resource.", + "description": "The available OEM-specific actions for this Resource.", + "longDescription": "This type shall contain the available OEM-specific actions for this Resource.", "patternProperties": { - "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_.]+$": { + "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { "description": "This property shall specify a valid odata or Redfish property.", "type": [ "array", @@ -153,18 +155,18 @@ "Digi" ], "enumDescriptions": { - "Cisco": "The Cisco pin configuration.", - "Cyclades": "The Cyclades pin configuration.", - "Digi": "The Digi pin configuration." + "Cisco": "The Cisco pinout configuration.", + "Cyclades": "The Cyclades pinout configuration.", + "Digi": "The Digi pinout configuration." }, "type": "string" }, "SerialInterface": { "additionalProperties": false, - "description": "This schema defines an asynchronous serial interface resource.", - "longDescription": "This resource shall be used to represent serial resources as part of the Redfish specification.", + "description": "The SerialInterface schema describes an asynchronous serial interface, such as an RS-232 interface, available to a system or device.", + "longDescription": "This Resource contains SerialInterface Resources as part of the Redfish Specification.", "patternProperties": { - "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_.]+$": { + "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { "description": "This property shall specify a valid odata or Redfish property.", "type": [ "array", @@ -179,21 +181,22 @@ }, "properties": { "@odata.context": { - "$ref": "http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.json#/definitions/context" + "$ref": "http://redfish.dmtf.org/schemas/v1/odata-v4.json#/definitions/context" }, "@odata.etag": { - "$ref": "http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.json#/definitions/etag" + "$ref": "http://redfish.dmtf.org/schemas/v1/odata-v4.json#/definitions/etag" }, "@odata.id": { - "$ref": "http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.json#/definitions/id" + "$ref": "http://redfish.dmtf.org/schemas/v1/odata-v4.json#/definitions/id" }, "@odata.type": { - "$ref": "http://redfish.dmtf.org/schemas/v1/odata.v4_0_3.json#/definitions/type" + "$ref": "http://redfish.dmtf.org/schemas/v1/odata-v4.json#/definitions/type" }, "Actions": { "$ref": "#/definitions/Actions", - "description": "The available actions for this resource.", - "longDescription": "The Actions property shall contain the available actions for this resource." + "description": "The available actions for this Resource.", + "longDescription": "This property shall contain the available actions for this Resource.", + "versionAdded": "v1_1_0" }, "BitRate": { "$ref": "#/definitions/BitRate", @@ -204,12 +207,12 @@ "ConnectorType": { "$ref": "#/definitions/ConnectorType", "description": "The type of connector used for this interface.", - "longDescription": "This property shall indicate the type of phyiscal connector used for this serial connection.", + "longDescription": "This property shall indicate the type of physical connector used for this serial connection.", "readonly": true }, "DataBits": { "$ref": "#/definitions/DataBits", - "description": "The number of data bits that will follow the start bit over the serial connection.", + "description": "The number of data bits that follow the start bit over the serial connection.", "longDescription": "This property shall indicate number of data bits for the serial connection.", "readonly": false }, @@ -226,7 +229,7 @@ }, "FlowControl": { "$ref": "#/definitions/FlowControl", - "description": "The type of flow control, if any, that will be imposed on the serial connection.", + "description": "The type of flow control, if any, that is imposed on the serial connection.", "longDescription": "This property shall indicate the flow control mechanism for the serial connection.", "readonly": false }, @@ -235,8 +238,8 @@ "readonly": true }, "InterfaceEnabled": { - "description": "This indicates whether this interface is enabled.", - "longDescription": "The value of this property shall be a boolean indicating whether this interface is enabled.", + "description": "An indication of whether this interface is enabled.", + "longDescription": "This property shall indicate whether this interface is enabled.", "readonly": false, "type": [ "boolean", @@ -249,12 +252,12 @@ }, "Oem": { "$ref": "http://redfish.dmtf.org/schemas/v1/Resource.json#/definitions/Oem", - "description": "This is the manufacturer/provider specific extension moniker used to divide the Oem object into sections.", - "longDescription": "The value of this string shall be of the format for the reserved word *Oem*." + "description": "The OEM extension property.", + "longDescription": "This property shall contain the OEM extensions. All values for properties that this object contains shall conform to the Redfish Specification-described requirements." }, "Parity": { "$ref": "#/definitions/Parity", - "description": "The type of parity used by the sender and receiver in order to detect errors over the serial connection.", + "description": "The type of parity used by the sender and receiver to detect errors over the serial connection.", "longDescription": "This property shall indicate parity information for a serial connection.", "readonly": false }, @@ -267,14 +270,14 @@ "type": "null" } ], - "description": "The physical pin configuration needed for a serial connector.", - "longDescription": "This property shall indicate the physical pin out for the serial connection.", + "description": "The physical pinout configuration for a serial connector.", + "longDescription": "This property shall indicate the physical pinout for the serial connector.", "readonly": true }, "SignalType": { "$ref": "#/definitions/SignalType", - "description": "The type of signal used for the communication connection - RS232 or RS485.", - "longDescription": "This property shall indicate the type of serial signalling that will be utilized for the serial connection.", + "description": "The type of signal used for the communication connection.", + "longDescription": "This property shall contain the type of serial signalling in use for the serial connection.", "readonly": true }, "StopBits": { @@ -309,12 +312,13 @@ "2" ], "enumDescriptions": { - "1": "1 stop bit following the data bits.", - "2": "2 stop bits following the data bits." + "1": "One stop bit following the data bits.", + "2": "Two stop bits following the data bits." }, "type": "string" } }, "owningEntity": "DMTF", - "title": "#SerialInterface.v1_1_3.SerialInterface" + "release": "2017.1", + "title": "#SerialInterface.v1_1_5.SerialInterface" }
\ No newline at end of file |