diff options
Diffstat (limited to 'import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch')
-rw-r--r-- | import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch b/import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch new file mode 100644 index 0000000000..50227a7748 --- /dev/null +++ b/import-layers/meta-openembedded/meta-networking/recipes-daemons/iscsi-initiator-utils/files/iscsi-initiator-utils-use-var-for-config.patch @@ -0,0 +1,240 @@ +iscsi-initiator-utils to use var for config + +Upstream-status: Backport +This patch is from fedora. + +Use /var/lib/iscsi/ instead of /etc/iscsi/ for holding +state files. + +Signed-off-by: Yao Zhao <yao.zhao@windriver.com> +Signed-off-by: Vu Tran <vu.tran@windriver.com> + +diff --git a/README b/README +index 7364b2d..5e8bff8 100644 +--- a/README ++++ b/README +@@ -164,10 +164,10 @@ available on all Linux installations. + + The database contains two tables: + +-- Discovery table (/etc/iscsi/send_targets); +-- Node table (/etc/iscsi/nodes). ++- Discovery table (/var/lib/iscsi/send_targets); ++- Node table (/var/lib/iscsi/nodes). + +-The regular place for iSCSI database files: /etc/iscsi/nodes ++The regular place for iSCSI database files: /var/lib/iscsi/nodes + + The iscsiadm utility is a command-line tool to manage (update, delete, + insert, query) the persistent database. +@@ -444,7 +444,7 @@ a scsi_host per HBA port). + To manage both types of initiator stacks, iscsiadm uses the interface (iface) + structure. For each HBA port or for software iscsi for each network + device (ethX) or NIC, that you wish to bind sessions to you must create +-a iface config /etc/iscsi/ifaces. ++a iface config /var/lib/iscsi/ifaces. + + Prep: + +@@ -478,29 +478,29 @@ Running: + iface0 qla4xxx,00:c0:dd:08:63:e8,20.15.0.7,default,iqn.2005-06.com.redhat:madmax + iface1 qla4xxx,00:c0:dd:08:63:ea,20.15.0.9,default,iqn.2005-06.com.redhat:madmax + +-Will report iface configurations that are setup in /etc/iscsi/ifaces. ++Will report iface configurations that are setup in /var/lib/iscsi/ifaces. + The format is: + + iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname + + For software iscsi, you can create the iface configs by hand, but it is + reccomended that you use iscsiadm's iface mode. There is a iface.example in +-/etc/iscsi/ifaces which can be used as a template for the daring. ++/var/lib/iscsi/ifaces which can be used as a template for the daring. + + For each network object you wish to bind a session to you must create +-a seperate iface config in /etc/iscsi/ifaces and each iface config file ++a seperate iface config in /var/lib/iscsi/ifaces and each iface config file + must have a unique name which is less than or equal to 64 characters. + + Example: + + If you have NIC1 with MAC address 00:0F:1F:92:6B:BF and NIC2 with + MAC address 00:C0:DD:08:63:E7 and you wanted to do software iscsi over +-TCP/IP. Then in /etc/iscsi/ifaces/iface0 you would enter: ++TCP/IP. Then in /var/lib/iscsi/ifaces/iface0 you would enter: + + iface.transport_name = tcp + iface.hwaddress = 00:0F:1F:92:6B:BF + +-and in /etc/iscsi/ifaces/iface1 you would enter: ++and in /var/lib/iscsi/ifaces/iface1 you would enter: + + iface.transport_name = tcp + iface.hwaddress = 00:C0:DD:08:63:E7 +@@ -550,7 +550,7 @@ cxgb3i.00:07:43:05:97:07 cxgb3i,00:07:43:05:97:07,<empty>,<empty>,<empty> + qla4xxx.00:0e:1e:04:8b:2e qla4xxx,00:0e:1e:04:8b:2e,<empty>,<empty>,<empty> + + +-Will report iface configurations that are setup in /etc/iscsi/ifaces. ++Will report iface configurations that are setup in /var/lib/iscsi/ifaces. + The format is: + + iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname +@@ -636,7 +636,7 @@ need a seperate network connection to the target for discovery purposes. + *This will be fixed in the next version of open-iscsi* + + For compatibility reasons, when you run iscsiadm to do discovery, it +-will check for interfaces in /etc/iscsi/iscsi/ifaces that are using ++will check for interfaces in /var/lib/iscsi/iscsi/ifaces that are using + tcp for the iface.transport and it will bind the portals that are discovered + so that they will be logged in through those ifaces. This behavior can also + be overriden by passing in the interfaces you want to use. For the case +@@ -654,7 +654,7 @@ we do not bind a session to a iface, then you can use the special iface + + iscsiadm -m discoverydb -t st -p ip:port -I default --discover -P 1 + +-And if you did not define any interfaces in /etc/iscsi/ifaces and do ++And if you did not define any interfaces in /var/lib/iscsi/ifaces and do + not pass anything into iscsiadm, running iscsiadm will do the default + behavior, where we allow the network subsystem to decide which + device to use. +@@ -696,7 +696,7 @@ To now log into targets it is the same as with sofware iscsi. See section + + ./iscsiadm -m discoverydb -t st -p 192.168.1.1:3260 --discover + +- This will search /etc/iscsi/send_targets for a record with the ++ This will search /var/lib/iscsi/send_targets for a record with the + ID [portal = 192.168.1.1:3260 and type = sendtargets. If found it + will perform discovery using the settings stored in the record. + If a record does not exist, it will be created using the iscsid.conf +@@ -705,7 +705,7 @@ To now log into targets it is the same as with sofware iscsi. See section + The argument to -p may also be a hostname instead of an address. + ./iscsiadm -m discoverydb -t st -p smoehost --discover + +- For the ifaces, iscsiadm will first search /etc/iscsi/ifaces for ++ For the ifaces, iscsiadm will first search /var/lib/iscsi/ifaces for + interfaces using software iscsi. If any are found then nodes found + during discovery will be setup so that they can logged in through + those interfaces. To specify a specific iface, pass the +@@ -761,7 +761,7 @@ To now log into targets it is the same as with sofware iscsi. See section + This command will perform discovery, but not manipulate the node DB. + + - SendTargets iSCSI Discovery with a specific interface. If you +- wish to only use a subset of the interfaces in /etc/iscsi/ifaces ++ wish to only use a subset of the interfaces in /var/lib/iscsi/ifaces + then you can pass them in during discovery: + + ./iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \ +@@ -1072,8 +1072,8 @@ where targetname is the name of the target and ip_address:port is the address + and port of the portal. tpgt, is the portal group tag of + the portal, and is not used in iscsiadm commands except for static + record creation. And iface name is the name of the iscsi interface +-defined in /etc/iscsi/ifaces. If no interface was defined in +-/etc/iscsi/ifaces or passed in, the default behavior is used. ++defined in /var/lib/iscsi/ifaces. If no interface was defined in ++/var/lib/iscsi/ifaces or passed in, the default behavior is used. + Default here is iscsi_tcp/tcp to be used over which ever NIC the + network layer decides is best. + +@@ -1188,7 +1188,7 @@ If set, iscsid will perform discovery to the address every + discovery.isns.discoveryd_poll_inval or + discovery.sendtargets.discoveryd_poll_inval seconds, + and it will log into any portals found from the discovery source using +-the ifaces in /etc/iscsi/ifaces. ++the ifaces in /var/lib/iscsi/ifaces. + + Note that for iSNS the poll_interval does not have to be set. If not set, + iscsid will only perform rediscovery when it gets a SCN from the server. +diff --git a/doc/iscsiadm.8 b/doc/iscsiadm.8 +index 7c209f6..e94cca0 100644 +--- a/doc/iscsiadm.8 ++++ b/doc/iscsiadm.8 +@@ -89,7 +89,7 @@ This option is only valid for ping submode. + .TP + \fB\-I\fR, \fB\-\-interface=\fI[iface]\fR + The interface argument specifies the iSCSI interface to use for the operation. +-iSCSI interfaces (iface) are defined in /etc/iscsi/ifaces. For hardware ++iSCSI interfaces (iface) are defined in /var/lib/iscsi/ifaces. For hardware + iSCSI (qla4xxx) the iface config must have the hardware address + (iface.hwaddress = port's MAC address) + and the driver/transport_name (iface.transport_name). The iface's name is +@@ -166,7 +166,7 @@ If no other options are specified: for \fIdiscoverydb\fR and \fInode\fR, all + of their respective records are displayed; for \fIsession\fR, all active + sessions and connections are displayed; for \fIfw\fR, all boot firmware + values are displayed; for \fIhost\fR, all iSCSI hosts are displayed; and +-for \fIiface\fR, all ifaces setup in /etc/iscsi/ifaces are displayed. ++for \fIiface\fR, all ifaces setup in /var/lib/iscsi/ifaces are displayed. + + .TP + \fB\-n\fR, \fB\-\-name=\fIname\fR +@@ -535,10 +535,10 @@ The configuration file read by \fBiscsid\fR and \fBiscsiadm\fR on startup. + The file containing the iSCSI InitiatorName and InitiatorAlias read by + \fBiscsid\fR and \fBiscsiadm\fR on startup. + .TP +-/etc/iscsi/nodes/ ++/var/lib/iscsi/nodes/ + This directory contains the nodes with their targets. + .TP +-/etc/iscsi/send_targets ++/var/lib/iscsi/send_targets + This directory contains the portals. + + .SH "SEE ALSO" +diff --git a/usr/idbm.c b/usr/idbm.c +index 4d30aa9..316e54f 100644 +--- a/usr/idbm.c ++++ b/usr/idbm.c +@@ -2468,9 +2468,9 @@ free_info: + int idbm_init(idbm_get_config_file_fn *fn) + { + /* make sure root db dir is there */ +- if (access(ISCSI_CONFIG_ROOT, F_OK) != 0) { +- if (mkdir(ISCSI_CONFIG_ROOT, 0660) != 0) { +- log_error("Could not make %s %d\n", ISCSI_CONFIG_ROOT, ++ if (access(ISCSIVAR, F_OK) != 0) { ++ if (mkdir(ISCSIVAR, 0660) != 0) { ++ log_error("Could not make %s %d\n", ISCSIVAR, + errno); + return errno; + } +diff --git a/usr/idbm.h b/usr/idbm.h +index 245f046..f45e86e 100644 +--- a/usr/idbm.h ++++ b/usr/idbm.h +@@ -28,12 +28,16 @@ + #include "config.h" + #include "list.h" + +-#define NODE_CONFIG_DIR ISCSI_CONFIG_ROOT"nodes" +-#define SLP_CONFIG_DIR ISCSI_CONFIG_ROOT"slp" +-#define ISNS_CONFIG_DIR ISCSI_CONFIG_ROOT"isns" +-#define STATIC_CONFIG_DIR ISCSI_CONFIG_ROOT"static" +-#define FW_CONFIG_DIR ISCSI_CONFIG_ROOT"fw" +-#define ST_CONFIG_DIR ISCSI_CONFIG_ROOT"send_targets" ++#define ISCSIVAR "/var/lib/iscsi/" ++ ++#define NODE_CONFIG_DIR ISCSIVAR"nodes" ++#define SLP_CONFIG_DIR ISCSIVAR"slp" ++#define ISNS_CONFIG_DIR ISCSIVAR"isns" ++#define STATIC_CONFIG_DIR ISCSIVAR"static" ++#define FW_CONFIG_DIR ISCSIVAR"fw" ++#define ST_CONFIG_DIR ISCSIVAR"send_targets" ++ ++ + #define ST_CONFIG_NAME "st_config" + #define ISNS_CONFIG_NAME "isns_config" + +diff --git a/usr/iface.h b/usr/iface.h +index 01f7074..2c6ef72 100644 +--- a/usr/iface.h ++++ b/usr/iface.h +@@ -20,7 +20,8 @@ + #ifndef ISCSI_IFACE_H + #define ISCSI_IFACE_H + +-#define IFACE_CONFIG_DIR ISCSI_CONFIG_ROOT"ifaces" ++#include "idbm.h" ++#define IFACE_CONFIG_DIR ISCSIVAR"ifaces" + + struct iface_rec; + struct list_head; |