diff options
Diffstat (limited to 'import-layers/yocto-poky/meta-yocto-bsp/README.hardware')
-rw-r--r-- | import-layers/yocto-poky/meta-yocto-bsp/README.hardware | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/import-layers/yocto-poky/meta-yocto-bsp/README.hardware b/import-layers/yocto-poky/meta-yocto-bsp/README.hardware index 84c5afa909..d8d2a0cac6 100644 --- a/import-layers/yocto-poky/meta-yocto-bsp/README.hardware +++ b/import-layers/yocto-poky/meta-yocto-bsp/README.hardware @@ -27,7 +27,7 @@ Hardware Reference Boards The following boards are supported by the meta-yocto-bsp layer: - * Texas Instruments Beaglebone (beaglebone) + * Texas Instruments Beaglebone (beaglebone-yocto) * Freescale MPC8315E-RDB (mpc8315e-rdb) * Ubiquiti Networks EdgeRouter Lite (edgerouter) * General IA platforms (genericx86 and genericx86-64) @@ -120,7 +120,7 @@ USB Device: dd command to write the image to a USB stick. -Texas Instruments Beaglebone (beaglebone) +Texas Instruments Beaglebone (beaglebone-yocto) ========================================= The Beaglebone is an ARM Cortex-A8 development board with USB, Ethernet, 2D/3D @@ -151,7 +151,7 @@ From a Linux system with access to the image files perform the following steps: 2. Use the "dd" utility to write the image to the SD card. For example: - # dd core-image-minimal-beaglebone.wic of=/dev/sdb + # dd core-image-minimal-beaglebone-yocto.wic of=/dev/sdb 3. Insert the SD card into the Beaglebone and boot the board. |