diff options
Diffstat (limited to 'meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config')
3 files changed, 210 insertions, 0 deletions
diff --git a/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/mihawk/zones.yaml b/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/mihawk/zones.yaml new file mode 100644 index 0000000000..4deb2523eb --- /dev/null +++ b/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/mihawk/zones.yaml @@ -0,0 +1,42 @@ +manager_configuration: + power_on_delay: 20 + +zone_configuration: + +#Air cooled zones +- zone_conditions: + - name: air_cooled_chassis + + zones: + - zone: 0 + cooling_profiles: + - air + - all + full_speed: 255 + default_floor: 195 + increase_delay: 5 + decrease_interval: 30 + interfaces: + - name: xyz.openbmc_project.Control.ThermalMode + properties: + - name: Supported + type: array[string] + values: + - value: DEFAULT + description: > + Default thermal control mode + - value: CUSTOM + description: > + Custom thermal control mode for handling the use of + optical cables located behind the GPU exhaust that + could produce overtemp warnings without this mode + enabled. + - name: Current + type: string + persist: true + values: + - value: DEFAULT + description: > + Set current thermal control mode to the + default which will be replaced on startup if + another selected mode was persisted.
\ No newline at end of file diff --git a/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/swift/zones.yaml b/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/swift/zones.yaml new file mode 100644 index 0000000000..c10c6c1860 --- /dev/null +++ b/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/swift/zones.yaml @@ -0,0 +1,68 @@ +manager_configuration: + power_on_delay: 20 + +zone_configuration: + +#Air cooled zones +- zone_conditions: + - name: air_cooled_chassis + + zones: + - zone: 0 + cooling_profiles: + - air + - all + full_speed: 9500 + default_floor: 8000 + increase_delay: 5 + decrease_interval: 30 + interfaces: + - name: xyz.openbmc_project.Control.ThermalMode + properties: + - name: Supported + type: array[string] + values: + - value: DEFAULT + description: > + Default thermal control mode + - name: Current + type: string + persist: true + values: + - value: DEFAULT + description: > + Set current thermal control mode to the + default which will be replaced on startup if + another supported mode was selected & persisted. + +#Water cooled zones +- zone_conditions: + - name: water_and_air_cooled_chassis + + zones: + - zone: 0 + cooling_profiles: + - water + - all + full_speed: 9500 + default_floor: 8000 + increase_delay: 5 + decrease_interval: 30 + interfaces: + - name: xyz.openbmc_project.Control.ThermalMode + properties: + - name: Supported + type: array[string] + values: + - value: DEFAULT + description: > + Default thermal control mode + - name: Current + type: string + persist: true + values: + - value: DEFAULT + description: > + Set current thermal control mode to the + default which will be replaced on startup if + another supported mode was selected & persisted. diff --git a/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml b/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml new file mode 100644 index 0000000000..63303d7c0f --- /dev/null +++ b/meta-ibm/recipes-phosphor/fans/phosphor-fan-control-zone-config/witherspoon/zones.yaml @@ -0,0 +1,100 @@ +manager_configuration: + power_on_delay: 20 + +zone_configuration: + +#Air cooled zones +- zone_conditions: + - name: air_cooled_chassis + + zones: + - zone: 0 + cooling_profiles: + - air + - all + full_speed: 10500 + default_floor: 8000 + increase_delay: 5 + decrease_interval: 30 + interfaces: + - name: xyz.openbmc_project.Control.ThermalMode + properties: + - name: Supported + type: array[string] + values: + - value: DEFAULT + description: > + Default thermal control mode + - value: CUSTOM + description: > + Custom thermal control mode for handling the use of + PCI cards located behind the GPU exhaust that + could overtemp where the default mode is not + sufficient enough. + - value: HEAVY_IO + description: > + Heavy IO thermal control mode for handling the use + of PCI cards that produce heavy IO utilization and + could overtemp. + - value: MAX_BASE_FAN_FLOOR + description: > + Maximum base fan floor mode is for handling the + use of any hardware that requires the highest + amount of cooling even when the system may be idle. + - name: Current + type: string + persist: true + values: + - value: DEFAULT + description: > + Set current thermal control mode to the + default which will be replaced on startup if + another selected mode was persisted. + +#Water cooled zones +- zone_conditions: + - name: water_and_air_cooled_chassis + + zones: + - zone: 0 + cooling_profiles: + - water + - all + full_speed: 10500 + default_floor: 8000 + increase_delay: 5 + decrease_interval: 30 + interfaces: + - name: xyz.openbmc_project.Control.ThermalMode + properties: + - name: Supported + type: array[string] + values: + - value: DEFAULT + description: > + Default thermal control mode + - value: CUSTOM + description: > + Custom thermal control mode for handling the use of + PCI cards located behind the GPU exhaust that + could overtemp where the default mode is not + sufficient enough. + - value: HEAVY_IO + description: > + Heavy IO thermal control mode for handling the use + of PCI cards that produce heavy IO utilization and + could overtemp. + - value: MAX_BASE_FAN_FLOOR + description: > + Maximum base fan floor mode is for handling the + use of any hardware that requires the highest + amount of cooling even when the system may be idle. + - name: Current + type: string + persist: true + values: + - value: DEFAULT + description: > + Set current thermal control mode to the + default which will be replaced on startup if + another selected mode was persisted. |