diff options
Diffstat (limited to 'meta-raspberrypi/README.md')
| -rw-r--r-- | meta-raspberrypi/README.md | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/meta-raspberrypi/README.md b/meta-raspberrypi/README.md index 2125767933..6c4e1e44ee 100644 --- a/meta-raspberrypi/README.md +++ b/meta-raspberrypi/README.md @@ -5,6 +5,7 @@ Yocto BSP layer for the Raspberry Pi boards - <http://www.raspberrypi.org/>. [](https://yocto-ci.resin.io/job/meta-raspberrypi1) [](https://yocto-ci.resin.io/job/meta-raspberrypi2) [](https://yocto-ci.resin.io/job/meta-raspberrypi3) +[](https://yocto-ci.resin.io/job/meta-raspberrypi4) [](https://meta-raspberrypi.readthedocs.io/en/latest/?badge=latest) [](https://matrix.to/#/#meta-raspberrypi:cub.icu) @@ -52,6 +53,28 @@ This layer depends on: 5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used) 6. Boot your RPI. +## Quick Start with kas + +1. Install kas build tool from PyPi (sudo pip3 install kas) +2. kas build meta-raspberrypi/kas-poky-rpi.yml +3. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used) +4. Boot your RPI. + +To adjust the build configuration with specific options (I2C, SPI, ...), simply add +a section as follows: + +``` +local_conf_header: + rpi-specific: | + ENABLE_I2C = "1" + RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt" +``` + +To configure the machine, you have to update the `machine` variable. +And the same for the `distro`. + +For further information, you can read more at <https://kas.readthedocs.io/en/1.0/index.html> + ## Maintainers * Andrei Gherzan `<andrei at gherzan.ro>` |