summaryrefslogtreecommitdiff
path: root/meta-facebook
AgeCommit message (Collapse)AuthorFilesLines
2022-11-21meta-bletchley: phosphor-network: enable force-sync-mac optionPotin Lai1-0/+3
For Bletchley, the flash is not embedded on the Chassis Controller Board (CCB), and the phosphor-network is only sync MAC address on first boot by default, the BMC may use the wrong MAC address after replacing the CCB. Enable the force-sync-mac option to ensure that the BMC loads the correct MAC address from the CCB on every boot. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: Ic55c5a11bea89618c429f855f2791e94e2c17a81
2022-11-18fb-ipmi-oem: srcrev bump f24c78e898..e9baaff143Andrew Geissler1-1/+1
Bonnie Lo (1): appcommands: support multi-host set/get fw version Change-Id: Id2fbed8ae2572617c303c338cf12517cefbe3110 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-11-07meta-facebook: phosphor-led-manager: enable lamp testingPotin Lai2-1/+3
Enable lamp testing feature for Bletchley (and all other systems). Signed-off-by: Potin Lai <potin.lai@quantatw.com> Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I9bfb937a46bd1784bf156d459536ea060e572dc8
2022-11-03meta-facebook: add timezone support for all systemsPotin Lai1-1/+1
Add timezone support for all systems. Tested on bletchley: root@bletchley:~# timedatectl | grep "Time zone" Time zone: PST8PDT (PDT, -0700) Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: Ic1e6da1cf4e84d2b0a907fd0969dd290fef30153
2022-11-02meta-facebook: phosphor-fan: avoid conflict with PSM targetsPatrick Williams1-26/+26
When using PSM, phosphor-fan is not responsible for installing some of the target files and bitbake fails with two packages installing the same files. Add some detection as a quick workaround so that Greatlakes can successfully build. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Idf7b49baa9a030cbf5afc983459d66f2557e085b
2022-11-01meta-facebook: enable Redfish power and thermal sensorsDelphineCCChiu1-0/+1
Support power and thermal sensor in `redfish/v1/chassis/{board_name}/sensor`. Tested: Check redfish `redfish/v1/chassis/{board_name}/sensor` API Signed-off-by: DelphineCCChiu <Delphine_CC_Chiu@wiwynn.com> Change-Id: If72f685810c43381fffb2dabbe651c5b9f995e7f
2022-11-01meta-facebook: greatlakes: initial phopsphor-state-manager supportKarthikeyan Pasupathi15-2/+317
Added machine layer support for greatlakes to support control the BMC, Chassis, and Host. It supports requests to power on and off the system by the user. Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com> Change-Id: Ie62cc289783d47d8b50cd0c555157749f160c253
2022-11-01meta-facebook: add memory usage warning thresholdPotin Lai1-0/+6
Add a log only warning threshold at 70% memory usage. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I74c49efeaedacff20f59a646c2a8e37ec76b5e7f
2022-11-01meta-bletchley: use mdio-tools instead mdio-utilPotin Lai2-3/+12
Introduce mdio-tools package to replace mdio-util script. This commit relies on the linux kernel patch below. LINK: https://lore.kernel.org/all/20221025055046.1704920-1-potin.lai.pt@gmail.com/ Tested Result: Check host status by power-ctrl which will call mdio internally. root@bletchley:~# power-ctrl sled6 status On Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I482dde297acb7797896d9b7ae07580104fb21540
2022-10-28meta-bletchley: fb-ipmi-oem: disable me_supportPotin Lai1-0/+1
The Host on Bletchley doesn't support IPMI and ME feature. Disable ME support for Bletchley. This commit relies on the patch below: https://gerrit.openbmc.org/c/openbmc/fb-ipmi-oem/+/58233 Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I753c07af0ea58c45ace837a4ddffd1b64a879184
2022-10-28fb-ipmi-oem: srcrev bump 3f6712731c..f24c78e898Andrew Geissler1-1/+1
Bonnie Lo (1): biccommands: post code handler Potin Lai (3): usb-dbg: modify HostSelector interface usb-dbg: add meson option for enabling ME support usb-dbg: get MaxPostion from DBus Change-Id: I3669f106420f3f5656d58077379ceda3aa607ed6 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-10-25meta-facebook : Enable phosphor-gpio-monitor in packagegroupKumar Thangavel1-0/+1
TESTED : Verified phosphor-gpio-monitor package enabled for facebook platforms. Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com> Change-Id: If5aae60ab27d8be4c0204df82b06af23df7f707d
2022-10-25meta-bletchley: add bletchley-host-state-monitor servicePotin Lai3-3/+216
Add a service for monitoring host power state by query port status via mdio bus. Test Results: - Poweron SLED6 root@bletchley:~# obmcutil -i=6 poweron root@bletchley:~# obmcutil -i=6 state CurrentBMCState : xyz.openbmc_project.State.BMC.BMCState.Ready CurrentPowerState : xyz.openbmc_project.State.Chassis.PowerState.On CurrentHostState : xyz.openbmc_project.State.Host.HostState.Running BootProgress : xyz.openbmc_project.State.Boot.Progress.ProgressStages.Unspecified OperatingSystemState: xyz.openbmc_project.State.OperatingSystem.Status.OSStatus.Inactive root@bletchley:~# journalctl -u bletchley-host-state-monitor ... Oct 24 07:55:17 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 5 Oct 24 07:55:18 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 4 Oct 24 07:55:22 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 5 Oct 24 07:55:23 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 4 Oct 24 07:55:27 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 5 Oct 24 07:55:29 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 4 Oct 24 07:55:30 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 3 Oct 24 07:55:31 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 2 Oct 24 07:55:33 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 1 Oct 24 07:55:34 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed, update host state to ON - Poweroff SLED6 root@bletchley:~# obmcutil -i=6 poweroff root@bletchley:~# obmcutil -i=6 state CurrentBMCState : xyz.openbmc_project.State.BMC.BMCState.Ready CurrentPowerState : xyz.openbmc_project.State.Chassis.PowerState.Off CurrentHostState : xyz.openbmc_project.State.Host.HostState.Off BootProgress : xyz.openbmc_project.State.Boot.Progress.ProgressStages.Unspecified OperatingSystemState: xyz.openbmc_project.State.OperatingSystem.Status.OSStatus.Inactive root@bletchley:~# journalctl -u bletchley-host-state-monitor Oct 21 09:38:21 bletchley systemd[1]: Started Bletchley host state monitoring. ... Oct 24 07:55:17 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 5 Oct 24 07:55:18 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 4 Oct 24 07:55:22 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 5 Oct 24 07:55:23 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 4 Oct 24 07:55:27 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 5 Oct 24 07:55:29 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 4 Oct 24 07:55:30 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 3 Oct 24 07:55:31 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 2 Oct 24 07:55:33 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:OFF, current:ON), check count: 1 Oct 24 07:55:34 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed, update host state to ON Oct 24 08:03:38 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:ON, current:OFF), check count: 5 Oct 24 08:03:39 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:ON, current:OFF), check count: 4 Oct 24 08:03:40 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:ON, current:OFF), check count: 3 Oct 24 08:03:42 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:ON, current:OFF), check count: 2 Oct 24 08:03:43 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed (previous:ON, current:OFF), check count: 1 Oct 24 08:03:44 bletchley bletchley-host-state-monitor[905]: SLED6: detected state changed, update host state to OFF Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I5916cd411c0d7d625b54f74c888aa380e00a1853
2022-10-24meta-bletchley: add ACPIPowerState interfacePotin Lai2-0/+10
Add ACPIPowerState interface to phosphor-settings for each host. Test Results: ``` root@bletchley:~# busctl call xyz.openbmc_project.ObjectMapper \ > /xyz/openbmc_project/object_mapper \ > xyz.openbmc_project.ObjectMapper GetSubTree sias / 0 1 \ > xyz.openbmc_project.Control.Power.ACPIPowerState -j { "type" : "a{sa{sas}}", "data" : [ { "/xyz/openbmc_project/control/host1/acpi_power_state" : { "xyz.openbmc_project.Settings" : [ "org.freedesktop.DBus.Introspectable", "org.freedesktop.DBus.Peer", "org.freedesktop.DBus.Properties", "xyz.openbmc_project.Control.Power.ACPIPowerState" ] }, "/xyz/openbmc_project/control/host2/acpi_power_state" : { "xyz.openbmc_project.Settings" : [ "org.freedesktop.DBus.Introspectable", "org.freedesktop.DBus.Peer", "org.freedesktop.DBus.Properties", "xyz.openbmc_project.Control.Power.ACPIPowerState" ] }, "/xyz/openbmc_project/control/host3/acpi_power_state" : { "xyz.openbmc_project.Settings" : [ "org.freedesktop.DBus.Introspectable", "org.freedesktop.DBus.Peer", "org.freedesktop.DBus.Properties", "xyz.openbmc_project.Control.Power.ACPIPowerState" ] }, "/xyz/openbmc_project/control/host4/acpi_power_state" : { "xyz.openbmc_project.Settings" : [ "org.freedesktop.DBus.Introspectable", "org.freedesktop.DBus.Peer", "org.freedesktop.DBus.Properties", "xyz.openbmc_project.Control.Power.ACPIPowerState" ] }, "/xyz/openbmc_project/control/host5/acpi_power_state" : { "xyz.openbmc_project.Settings" : [ "org.freedesktop.DBus.Introspectable", "org.freedesktop.DBus.Peer", "org.freedesktop.DBus.Properties", "xyz.openbmc_project.Control.Power.ACPIPowerState" ] }, "/xyz/openbmc_project/control/host6/acpi_power_state" : { "xyz.openbmc_project.Settings" : [ "org.freedesktop.DBus.Introspectable", "org.freedesktop.DBus.Peer", "org.freedesktop.DBus.Properties", "xyz.openbmc_project.Control.Power.ACPIPowerState" ] } } ] } ``` Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: Icd573faf69d818b394cccab223c56a260a55767c
2022-10-24meta-facebook : Enable phosphor-fan in packagegroupKumar Thangavel1-0/+1
TESTED : Verified phosphor-fan and sensor-monitor package enabled for facebook platforms. Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com> Change-Id: I01798e122d75f078f011538b5032056106912727
2022-10-24meta-bletchley: enable obmc-phosphor-buttons featurePotin Lai3-0/+32
Enable obmc-phosphor-buttons and add gpio_defs.json to support the feature of debug card button. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I673db3587232bfc57dabc5fa157ae9945cb25974
2022-10-24meta-facebook: update bletchley nvme configPotin Lai2-9/+3
1. Move nvme_config.json to meta-facebook layer 2. Update nvme thermal sensor thresholds base as suggested by thermal team. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: Ia444afa2a27032c88302e913eb07909f7123c608
2022-10-24meta-bletchley: add switch diagnostics scriptPotin Lai2-0/+42
Add a switch diagnostics script to dump port register via mdio bus. Tested: root@bletchley:~# /usr/libexec/bletchley-switch-diag ======================================== Port 10 (BMC) **************************************** [00]: 0E07 (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07FE (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0001 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0000 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 001B (Debug Counters) ======================================== ======================================== Port 3 (SLED1) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07FD (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0002 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 2 (SLED2) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07FB (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0004 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 1 (SLED3) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07F7 (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0008 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 7 (SLED4) **************************************** [00]: 100F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07EF (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0010 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0000 (Debug Counters) ======================================== ======================================== Port 6 (SLED5) **************************************** [00]: 1D4F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07DF (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0020 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0075 (Debug Counters) ======================================== ======================================== Port 5 (SLED6) **************************************** [00]: 1D4F (Port Status) [01]: 0003 (Physical Control) [02]: 0000 (Flow Control) [03]: 1920 (Switch Identifier) [04]: 007F (Port Control 0) [05]: 0000 (Port Control 1) [06]: 07BF (Port Based VLAN Map) [07]: 0001 (Default VLAN ID & Priority) [08]: 2080 (Port Control 2) [09]: 0001 (Egress Rate Control) [0A]: 8000 (Egress Rate Control 2) [0B]: 0040 (Port Association Vector) [0C]: 0000 (Port ATU Control) [0D]: 0000 (Override) [0E]: 0000 (Policy & MGMT Control) [10]: 0000 (Extended Port Control Operation) [11]: 0000 (Extended Port Control Data) [16]: 0033 (LED Control) [17]: 0000 (IP Priority Mapping Table) [18]: 0000 (IEEE Priority Mapping Table) [19]: 0000 (Port Control 3) [1B]: 8000 (Queue Counters) [1C]: 0000 (Queue Control) [1D]: 0000 (Queue Control 2) [1E]: 0000 (Enable & Cut Through) [1F]: 0058 (Debug Counters) ======================================== Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I3915e0747beeb8f8a3d06d3409ac55ed0cd50b41
2022-10-24meta-bletchley: introduce bletchley-system-state-initPotin Lai5-0/+94
Because Bletchley does not have IPMI between Bmc & Host, the Host init state will set to Off after Bmc booted. We require an extra service to check and set Host state & Chassis power state to correct state before doing any power action or power policy restore. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I680bc62559ea6f7df6dbe171b54d2cda0c7ae0d4
2022-10-24meta-bletchley: enable kernel loadable module supportPotin Lai1-0/+2
In order to add mdio-tools and mdio-netlink package, enable kernel loadable module support. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I7ce0634fdac5e2e400c3eded32ab9fe490794fb4
2022-10-24meta-bletchley: update fsc configuration R06 (inlet)Potin Lai1-44/+50
Update inlet based FSC configuration R06. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I8ad53ec0eace157af47503892beae3820a8520ac
2022-10-14treewide: more obmc-host-ctl cleanupsPatrick Williams2-2/+0
obmc-host-ctl is defined as a MACHINE, DISTRO, and IMAGE feature. The IMAGE feature pulls in a virtual provider only if the COMBINED feature (MACHINE + DISTRO) is enabled. This is only done on openpower machines. There are a lot of other places where machines are half-way disabling this feature and/or changing variables which have zero effect anyhow. Clean up almost all references to `obmc-host-ctl`. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I090d782bb6a34dc4e3c43df97e8ccf6e1812fed5
2022-10-13fb-ipmi-oem: srcrev bump 85ac24de4a..3f6712731cAndrew Geissler1-1/+1
Bonnie Lo (1): oemcommands: set system guid Change-Id: I274b644e69922287393910b49760352f4e54355a Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-10-13treewide: remove pointless abstractionsBrad Bishop1-1/+1
All of these abstractions have exactly one implementation. Remove the indirection to improve at a glance comprehension. Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Change-Id: I5d701aff6d0876fa3b2d16c841cbdcb0433b221f
2022-10-11fb-ipmi-oem: srcrev bump 020ff3e49f..85ac24de4aAndrew Geissler1-1/+1
Karthikeyan Pasupathi (1): greatlakes: Added config files for debug card Change-Id: I514789b3882a5d83095d30fe8da9af84cd90e23f Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-10-10meta-facebook: add emmc dependencies and timeoutPatrick Williams2-1/+3
Add dependencies so that the `emmc-init` service only runs if the device is present. Add a timeout parameter to the fstab entry for the device so that the timeout is a reasonably short amount, since we expect the device to always be immediately available. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I405a6773ff71f9eb047c4bb9d684fdd9b5d97948
2022-10-07meta-facebook: Add json file for health monitor.Jayashree Dhanapal2-0/+57
BMC health monitor json file is added for Facebook platform to monitor the CPU, Memory and Storage usage. It will reboot the target, once it exceeds the critical threshold value. Tested: Tested in Facebook YosemiteV3.5 platform Signed-off-by: Jayashree Dhanapal <jayashree-d@hcl.com> Change-Id: Ieb7486b558de087fac7e9acaba1d88771a5b7626
2022-10-06meta-facebook: bletchley: 32-bit idevicerestore supportPotin Lai3-0/+8
Add a few recipe tweaks in order to enable idevicerestore to run on 32-bit platforms like AST2600. - Add large file support (-D_FILE_OFFSET_BITS=64): - idevicerestore - libzip - Modify usbmuxd.service to discard "--user usbmuxd" and move PIDFile under /run. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I5dc3c925b4b61207b17e3739c42336d6da5c512c Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2022-10-06meta-facebook: add emmc-init packagePotin Lai4-0/+82
Add a service and script for detecting the state of the eMMC device and formatting it if needed. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I4618d1691dedcff582772a0749c5797ad052f238 Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2022-10-06meta-facebook: add secondary-emmc featurePotin Lai6-0/+26
* Define a MACHINE_FEATURE that enables a secondary eMMC device. * Add kernel and base-files support for mounting the eMMC device using btrfs. * Enable machine feature for Bletchley. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I3fde3b285720c137c4e5bbbad233e4ef40b84d54
2022-10-06meta-facebook: bletchley: set kernel VMSPLIT_3G_OPTPatrick Williams1-0/+2
We are increasing the RAM for PVT to 2G. In order for userspace to be able to access larger amounts of RAM (and mmap'd files), move the VMSPLIT up to 3G. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I96f095f3ea3f6e9e585764d14bbe17ef67df9a8a
2022-10-04meta-facebook : Add phosphor-buttons gpio config YV2Naveen Moses2-0/+123
This change adds phosphor-buttons gpio configs for the following : 1. Power button 2. Reset button 3. Host selector 4. Debug host selector button 5. serial uart mux To keep the install method common for copying gpio_defs.json file in supported platforms the install method is moved to obmc-phosphor-buttons_git.bb file. Signed-off-by: Naveen Moses <naveen.mosess@hcl.com> Change-Id: I91a106fdc5ac9aa83eec63cbd41a9615b380c37d
2022-09-30add langdale to compatible layerAndrew Geissler5-5/+5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
2022-09-20fb-ipmi-oem: srcrev bump e4d6fe74c8..020ff3e49fAndrew Geissler1-1/+1
Patrick Williams (1): selcommands: add include for flat_map Change-Id: I803a54069a2a0e9758d085493e115cafdb8fcaa9 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-09-15meta-bletchley: fix enclosure identify feature on redfishPotin Lai2-2/+7
Add xyz.openbmc_project.Inventory.Item.Panel interfae into /system/chassis/bmc inventory object papth because bmcweb uses xyz.openbmc_project.Inventory.Item.Panel to determine if the FRU has LED indicators. Also add both enclosure_identify enclosure_identify_blink led group difinition in led.yaml, which are required by redfish. Tested Results: 1. Enable LED indicator [potin@localhost redfish-testing]$ curl -k -H "X-Auth-Token: $token" \ > -X PATCH https://$bmc_ip/redfish/v1/Chassis/bmc \ > -d '{"LocationIndicatorActive":true}' [potin@localhost redfish-testing]$ curl -k -H "X-Auth-Token: $token" \ > https://$bmc_ip/redfish/v1/Chassis/bmc 2>/dev/null \ > | grep Indicator "IndicatorLED": "Blinking", "LocationIndicatorActive": true, 2. Disable LED indicator [potin@localhost redfish-testing]$ curl -k -H "X-Auth-Token: $token" \ > -X PATCH https://$bmc_ip/redfish/v1/Chassis/bmc \ > -d '{"LocationIndicatorActive":false}' [potin@localhost redfish-testing]$ curl -k -H "X-Auth-Token: $token" \ > https://$bmc_ip/redfish/v1/Chassis/bmc 2>/dev/null \ > | grep Indicator "IndicatorLED": "Off", "LocationIndicatorActive": false, Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: Ice0fd7ab6fbdc82e87ac314396db4b33b313234b
2022-09-15meta-bletchley: bsp: increase vmalloc to 768MPotin Lai1-1/+1
We notice the spi-aspeed-smc driver failed to Tested on QEMU with 2GB memory: - vmalloc=512M: spi-aspeed-smc shows ioremap failed root@bletchley:~# dmesg | grep "Kernel command line:" [ 0.000000] Kernel command line: console=ttyS4,57600n8 root=/dev/ram rw vmalloc=512M root@bletchley:~# dmesg | grep spi-aspeed-smc [ 2.410462] spi-aspeed-smc 1e620000.spi: CE0 read buswidth:2 [0x203b0641] [ 4.908989] spi-aspeed-smc 1e620000.spi: Calibration area too uniform, using low speed [ 4.909416] spi-aspeed-smc 1e620000.spi: CE1 read buswidth:2 [0x203b0041] [ 4.968292] spi-aspeed-smc 1e631000.spi: ioremap failed for resource [mem 0x50000000-0x5fffffff] [ 4.969035] spi-aspeed-smc 1e631000.spi: missing AHB mapping window [ 4.969301] spi-aspeed-smc: probe of 1e631000.spi failed with error -12 - vmalloc=768M: spi-aspeed-smc probe successfully root@bletchley:~# dmesg | grep "Kernel command line:" [ 0.000000] Kernel command line: console=ttyS4,57600n8 root=/dev/ram rw vmalloc=768M root@bletchley:~# dmesg | grep spi-aspeed-smc [ 2.672402] spi-aspeed-smc 1e620000.spi: CE0 read buswidth:2 [0x203b0641] [ 2.844554] spi-aspeed-smc 1e620000.spi: Calibration area too uniform, using low speed [ 2.845442] spi-aspeed-smc 1e620000.spi: CE1 read buswidth:2 [0x203b0041] Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I7ad7a2127a103db7cbefd6d89d42bd780294ceb0
2022-09-12treewide: handle more upstream TEMPLATECONF movePatrick Williams4-0/+0
We also need to move the conf-notes.txt files. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ic44e015c0216b526de4fec277ad42f162bca1f33
2022-09-09treewide: handle upstream TEMPLATECONF movePatrick Williams8-0/+0
The latest poky commit is requiring us to have all of our template configs in a subdirectory instead of directly in the `conf` directory. Without this we end up with errors during setup like: ``` Error: TEMPLATECONF value (which is .../openbmc/meta-facebook/meta-bletchley/conf) must point to meta-some-layer/conf/templates/template-name ``` Fix this by moving all of our template files into the 'default' template subdirectory (following the pattern of poky) and modifying `setup` as necessary to follow. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Iecefde73d55acbb6bc63ae3d68c4311adaf327ae
2022-09-06meta-bletchley: introduce board-type-checker-fpb servicePotin Lai4-0/+138
Add board-type-checker-fpb service for checking the board type (main or 2nd source) of front panel board. Base on the board type result, this service help probing i2c device with compatable driver and creating a softlink to link virtual sensor configuration to corresponding json file. This commit require a kernel patch to remove hdc1080 node from devicetree. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I2b9aabb41c9749f525fe5444fb519871f0a7796d
2022-09-06meta-bletchley: phosphor-virtual-sensor: add config for each FPB typePotin Lai3-2/+147
Add virtual sensor configuration for each front panel board type, and the phosphor-virtual-sensor require board-type-checker-fpb to setup the softlink of configuration. This patch relies on the patch below: https://gerrit.openbmc.org/c/openbmc/openbmc/+/56384 Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I8537985682228aa651d6286aaac3aa5dac285795
2022-09-06meta-bletchley: phosphor-ipmi-host: skip Ipmi SoftPowerOff servicePotin Lai1-0/+5
Bletchley doesn't have IPMI support, skip xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service service Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I5a302d92cbfbaeabf921b46fe3026d48bf0ce6fb
2022-09-06meta-bletchley: motor-ctrl: map host power action to obmc host targetPotin Lai2-5/+5
Mapping AC relay on/off to chassis power on/off: - host-ac-on@.service --> obmc-chassis-poweron@.target - host-ac-off@.service --> obmc-chassis-poweroff@.target Mapping host power button on/off to host starting/stopping - host-poweron@.service --> obmc-host-starting@.target - host-poweroff@.service --> obmc-host-stopping@.target Test Results: root@bletchley:~# obmcutil -i=6 poweron root@bletchley:~# obmcutil -i=6 state CurrentBMCState : xyz.openbmc_project.State.BMC.BMCState.Ready CurrentPowerState : xyz.openbmc_project.State.Chassis.PowerState.On CurrentHostState : xyz.openbmc_project.State.Host.HostState.Running BootProgress : xyz.openbmc_project.State.Boot.Progress.ProgressStages.Unspecified OperatingSystemState: xyz.openbmc_project.State.OperatingSystem.Status.OSStatus.Inactive root@bletchley:~# obmcutil -i=6 poweroff root@bletchley:~# obmcutil -i=6 state CurrentBMCState : xyz.openbmc_project.State.BMC.BMCState.Ready CurrentPowerState : xyz.openbmc_project.State.Chassis.PowerState.Off CurrentHostState : xyz.openbmc_project.State.Host.HostState.Off BootProgress : xyz.openbmc_project.State.Boot.Progress.ProgressStages.Unspecified OperatingSystemState: xyz.openbmc_project.State.OperatingSystem.Status.OSStatus.Inactive Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I1fa2ec6d9233be61117149ac7f7d46f0417a6930
2022-09-06meta-bletchley: power-ctrl: add delay in do_action_on()Potin Lai1-0/+1
In Bletchley, we check host link status from switch to identify the host power state. During the power on process, the host (MAC mini) need some extra times to stable link status. Add extra 10 seconeds delay into do_action_on() to avoid get wrong host power state during stress testing of host power on/off. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: Ica628df42e29912029b44675aacdf555263cb6fa
2022-08-30fb-ipmi-oem: srcrev bump e40592a7cb..e4d6fe74c8Andrew Geissler1-1/+1
Logananth Sundararaj (1): Add BIC to handle the DCMI commands Change-Id: Ic747c6b2c172d8506642755d533082aa98558d8f Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2022-08-25meta-facebook : Add Whitelist as IPMI restriction mode by defaultKumar Thangavel4-1/+17
Added IPMI restriction mode as Whitelist by default mode for all the hosts in machine layer for Facebook YosemiteV2 platform. TESTED : Built Facebook YosemiteV2 images and loaded on the target hardware. Verified restriction mode as whitelist by default. Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com> Change-Id: Ib3e98615a2ec80d241f1677ac1838de5a837c6d0
2022-08-20phosphor-fan: Rename meson optionMatt Spinler1-1/+1
The option that tells the code to use the host state as the power state was renamed in the code. phosphor-fan-presence: srcrev bump bf8e56f699..b7dd3e222c Matt Spinler (2): control: Display locked targets in debug dump meson: Rename host power state checking option Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: Ic4dfd0c600b31a3aa0d0c9b8101c27e488812bb2 Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2022-08-19phosphor-fan: Build with mesonMatt Spinler1-1/+1
The phosphor-fan-presence repository added meson support, so start using it. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: If850d3d379ad82dc8f9691efd7a0561f350543dc
2022-08-18fby35: Rename to greatlakesPeter Delevoryas14-7/+7
Change-Id: Ia7e6bbf0506e9e6acb99fdf67fc7d55a20588a0d Signed-off-by: Peter Delevoryas <peter@pjd.dev>
2022-08-18meta-bletchley: enable IPMB for USB debug cardPotin Lai2-0/+13
1. Add IPMB channel configuration for USB debug card. 2. Enable both phosphor-ipmi-ipmb and fb-ipmi-oem. This patch relies on the kernel patch below: https://lore.kernel.org/all/20220810004338.329832-2-potin.lai.pt@gmail.com/ Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I10c0a99530519e9533dbf0ac5b22a31051f91f98
2022-08-16meta-bletchley: bsp: set vmalloc to 512MPotin Lai1-1/+1
The vmalloc not automatic assigned correctly With 2048MB memory. Manual append `vmalloc=512M` in bootargs to avoid boot issue of vmap allocation failed. Signed-off-by: Potin Lai <potin.lai@quantatw.com> Change-Id: I11d3c8babb533ac94e81017da19feadeda45f1e2
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-19 07:52:06 +0300