Age | Commit message (Collapse) | Author | Files | Lines |
|
On witherspoon-tacoma the GPIO that specifies if the system is water
cooled is Q7 (135). Update phosphor-cooling-type's config file
appropriately.
(From meta-ibm rev: 5d62a1c264bd72d9070e046a5ec10ad9b8715392)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I63131a81ecb984e7746e54a98c539a52d887e155
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The check_pnor_format checks if the PNOR is formatted as UBI,
so it should only be added if the UBI feature is enabled.
(From meta-ibm rev: 091f26661b09c9d0a6f6b632b40cc8a84eac25c3)
Change-Id: Ief252652cd347a0bf4a8f8eb592672d0e9740514
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
For the witherspoon-128 machine, add a kernel patch for a
witherspoon-128 devicetree that includes the upstream devicetree but
sets the proper flash node attributes. This will keep the devicetree
better in sync with the upstream one.
(From meta-ibm rev: f7f93979873dc762aa9676a4a8714806d12f638f)
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Change-Id: I6ff03cbfd80a9df1b139625fb11b16b7684b4aa5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
It is not yet supported in the kernel.
(From meta-ibm rev: 37b0344925323c3de0bd86fd00ea075e383153da)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ie09afb9a4ee1d96d7b2a70fe79ef9a85d8971ea2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Utilize the pgood property as a precondition to loading fan control
events based on property states other than the OCC active events. Since
the OCCs are not active when powered off (pgood = 0) those events having
OCCs active as a precondition are not necessary to be added.
This is the first step to enabling fan control to run at BMC standby.
When the default phosphor-fan-control@.service starts after power on,
the pgood property value is already set to 1. Therefore this produces no
change in fan control activity.
Tested:
No change in fan speed control
(From meta-ibm rev: dadf39cdbb093e0c2566189f3e876dd3c01e13d0)
Change-Id: Ieb010804d59ed318463fca1fcbdce5b5123b81df
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ipkvm is not needed for the witherspoon-tacoma system. May bring this
back in some day for testing purposes but there are no near term plans
to use or support this.
(From meta-ibm rev: 3e11092404f8512241209c4ea26988171cf35263)
Change-Id: Ibb0bc351504070661179491d07f3af144cc97602
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add Rainer power-on configuration support and remove unused GPIOs.
(From meta-ibm rev: 114bd7308d03fe7949517cd939b6dd9f575d59cb)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I29df80c5d446ebcba929cef334f06969c258f5d9
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add Rainier system power sequencer configuration file.
(From meta-ibm rev: 65ba7af3ef1f36b4b77c5776478b59d1a7bf2334)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: Ia55257b24e1e5095bbd9db24fbf67e5968c4f9cc
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ipkvm is not needed for the rainier system
(From meta-ibm rev: 556f78bc1a4c0d02496e79754fa6fa7147c98e02)
Change-Id: I79f19dca7024025efcbe25ac3a55df9bf047bcbb
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This system's GPIO layout is different than witherspoon's.
(From meta-ibm rev: e401c9560f4f7d85952d1630095df9ad784de0b2)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I4ed9f1de4b25258e791a514643863494a99fde3d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
witherspoon-pfault-analysis is promoted to phosphor-power:
https://lists.ozlabs.org/pipermail/openbmc/2019-August/017729.html
This patch does the first migration step which is to point this recipe
at the canonical repository.
A subsequent step could be adding a phosphor-power recipe in OpenBMC's
meta-phosphor.
(From meta-ibm rev: de9a39f0a56410de046a260b51ca7ff9f162b12c)
Change-Id: Ib6af976ac3b82d37f96dea4b45bba730ca98753d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set the flash size so we get 128MiB images.
Remove INITRAMFS and IMAGE_FSTYPES overrides so we get the standard
phosphor images.
(From meta-ibm rev: 1c12470b1ea14d6b043e0b214e800b974d10a36d)
Change-Id: Ic941879b882aae809693a7901f3af95d23db5d05
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Rainier is a POWER system with an ast2600.
Build instructions:
TEMPLATECONF=meta-ibm/meta-witherspoon/conf . oe-init-build env
MACHINE=rainier DISTRO=openbmc-openpower bitbake obmc-phosphor-image
(From meta-ibm rev: 4c39d65a0b5678042a96324197c37478d81d6d4a)
Change-Id: I4bf5424d99ea643f7262ae17c962d2b7dd280076
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Change tpm connector instance name to prevent wrong name in bmc yaml
file.
(From meta-ibm rev: dad5e4f56d827cab311d9399a48bd09c26296f15)
Change-Id: I919a8faadd3036b98215b76195602c1f8fb12435
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
IBMBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-ibm rev: 9585e66aba26c0c0c7b10ed2552f3e42aaae078c)
Change-Id: Iec1fe1ed7cd96615c51d5e81be60f4189c8e970c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-ibm rev: fd1276f3a466058f0f0adbbbc6de889c0ceff9ac)
Change-Id: I6d9db69525486e394a3e4757d3173284d0b07109
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Display sample build invocations when sourcing oe-init-build-env.
These are only the most commonly used combinations of
distro/machine/image and not an exhaustive list of all supported
configurations. Rather the purpose of displaying these is to help
bitbake newcomers quickly initiate a build without having to set DISTRO
and MACHINE in local.conf or wonder which image recipe to bake.
(From meta-ibm rev: 85057176dc1cee6ab5c78ca949f89e5cdb555bca)
Change-Id: Ie16860278d9d779fa1d53025a29609ad45dcb94f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Brad Bishop (3):
build: fix some warnings
build: add support for building with meson
build: drop autotools
(From meta-ibm rev: 23d2feff13ee457a36f13bb6d615d0a11cc2428b)
Change-Id: Icb648c74c18d203318692cfb5febc8672a437b95
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Get total power from occ.
(From meta-ibm rev: 5f74841d980f274383dd0bf1c16b1c3df18142e2)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I97bf6b2229890dca1a0bda421b85b10392c2a814
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
IBMBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-ibm rev: cbbb0e5b4e44d831fce5daafd13272d401440f40)
Change-Id: Ib214f92b2c384e3eb2a1f53ecf4b21034438d001
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The cooling-type in phosphor-fan is optional, and Romulus is a
air-cooled system and does not require cooling-type application at all.
Remove the cooling-type app and the related configuration files.
Tested: Verify the generated phosphor-fan related hpp and cpp files are
identical as before, and the system is able to power on and do
fan monitor/control without problem.
(From meta-ibm rev: 3168f5e5fb59bd37eed1600d42a8d6fc02875fea)
Change-Id: I30f47ef63f4ff5bea89f31966273930baaf070ea
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-ibm rev: effd83bdc65d9ae8f9d000205f8d55e0c29557e4)
Change-Id: I5d8fb1cd15e0b0bf2c2360631be8f259f42be98f
Signed-off-by: Alvin Wang <alvinwang@msn.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The tacoma card is a boxelder replacement (witherspoon bmc card) with an
ast2600 on it.
By default use core-image-minimal as the initramfs. To add the full
OpenBMC userspace set INITRAMFS_IMAGE="obmc-phosphor-image" in local.conf.
Build instructions:
TEMPLATECONF=meta-ibm/meta-witherspoon/conf . oe-init-build-env
MACHINE=witherspoon-tacoma DISTRO=openbmc-openpower bitbake aspeed-image-norootfs
(From meta-ibm rev: 77e917a89fd591bdc614aab362138f563460a316)
Change-Id: I75374dbb3a01a66b2c70d96e56587a818262ebf8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Now the mihawk fan event will build error on openbmc master.
So I made some changes in order to solve the problem.
Tested: Verify fan control functionality of mihawk image
(From meta-ibm rev: 3e3ec10428cabe6917ea982159565024fcd21f9b)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I84aa7e8fd85dba15a5a84bbf7944bb286e5ba9ae
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Creating and Registering service files with additional
text data to uniquely identify IBM BMCs in a network.
(From meta-ibm rev: 2c2b286604e82f89edd973bc15aee78ecf4b9a7f)
Change-Id: I3b843684f5df6a9b2cbe8a3709ee1203fb44ce42
Signed-off-by: asmithakarun <asmithkr@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add mihawk's ipmi sensor and fru yaml.
Tested: Use ipmi command to get the sensor list and fru data.
(From meta-ibm rev: 05c9a2734de75271837313f0e1794c58df50e990)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: Ic85af9b0cc1b44a3377fa919e63ab04dbff7a31c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Witherspoon has only one LAN interface which is channel number 1.
The json file provided by the phosphor layer has channel information
for two LAN interfaces. The phosphor layer config file is modified to
mark the channel number 2 as reserved.
(From meta-ibm rev: 48dc78b5e8b6deba59e4aa200b8d88f10e277b69)
Change-Id: I4af0b7e682d2ec266831c7053926d1515f62c726
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable this config for mihawk so the fan sensors are working, otherwise
hwmon will fail and exit when fans are not working.
Tested: Verify that the fan_tach sensors return -ETIMEOUT when host is
powered off and do not exit with failure.
(From meta-ibm rev: 2e39633c12f7914b1a4a398bbff9b467930bb731)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I0a7e881de5d5baa8d4db3cac9ca3cb46ec08faf4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Since mihawk has share and dedicated two ports, so use two mac addresses.
Tested:Use ip a command to see two mac addresses
(From meta-ibm rev: ed92ee6fa8847511fbf2049e02ef3f8f0d7a7c70)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I43b3b78f7efd7e339e91bdc356283f6b9ffe1a5c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Most of mihawk's sensors are different from witherspoon, so I temporarily
added the mihawk part and did not change the witherspoon.
Add mihawk version of fan control and d-bus monitor.
Mihawk does not have a water cooled mode, so another independent folder is added.
Tested: 1.Shut down the system if more than three cores
have a temperature greater than 100 degrees Celcius.
2.Fan control support cpu core, dimm, Onboard.
3.Confirm that sensor is able to return normally via REST.
(From meta-ibm rev: 949f91431bba2f0139cc823d674a741f9590c885)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: Icc401f32c67b622f0f1448e1166112e02c135a8f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Pick up new IPMI clear sensor
(From meta-ibm rev: 033ecca0a4321aba8000fd289c43aa38721255b2)
Change-Id: I5c42bad754157bcae47463a1e8d6c0d1993e45d8
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This extension will (when it's complete) create IBM's Platform Event
Logs (PELs) for every OpenBMC event log, as well as provide features
to exchange them with the host, package them for Redfish, etc.
(From meta-ibm rev: 625fc419ae882dd572a1045bdca3286b896a69fe)
Change-Id: Ia215ce221ac58037c0f8029362181dde8a94d42e
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The contents of this up-stream include the following items
1.Basic function
2.Led settings
3.GPIO monitor (id button and power supply)
4.Linux dts patch.
(From meta-ibm rev: c53430a2234917b71f29d7e61d6aea749c45a2fc)
Change-Id: Id0e47fd9197c8b2a70cbc94888bd572255664cdd
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
A recent kernel update added a second input current/voltage/power
reading to the hwmon sysfs attributes for the ir35221 VRMs, and it threw
off the labels in the config files since they were hardcoded for the
specific previous numbers. For example, curr2_input previously
represented an output current but now represents an input current.
Fix this by using the LABEL mode in hwmon to find which sysfs file to
use for a particular sensor by the contents of its corresponding label
file. For example, the p0_vdd_current sensor should look at the sysfs
file that has a corresponding 'iout1' value in the currX_label file.
Tested: Test that the voltages are back within thresholds again and not
showing values around 12V.
(From meta-ibm rev: bca7ed0127f9e82895fb60b66b325347970f0860)
Change-Id: I9f28c9445daf9ce6206ff9e38e271ac805768fae
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Aatir Manzur (1):
Power supply input faults resolution
(From meta-ibm rev: bc9be1c977fcea7543aab6f2ffd51372bb3e805f)
Change-Id: I46d82875b474abe1af478e8bbfd7d1141d2d5c3d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
BMCWeb uses ObjectMapper associations to find sensor information for
Redfish. Due to BMCWeb enhancements for the Power and SensorCollection
schemas, the following Witherspoon association changes are required:
* Remove the "chassis" <-> "all_sensors" association for power supplies.
Power supplies were considered chassis by BMCWeb as a short-term
solution, but they have been moved to the Power schema.
* Add the power supply sensors to the "chassis" <-> "all_sensors"
association for the top level chassis.
* Add other missing power sensors to the "chassis" <->
"all_sensors" association for the top level chassis. These
associations were temporarily removed due to limitations in the BMCWeb
support for power sensors. These limitations have been addressed.
See https://github.com/openbmc/docs/blob/master/sensor-architecture.md
for more information on sensor associations used by BMCWeb.
(From meta-ibm rev: a1c35f612f58e5453fe988d59db21a8673fdcfa4)
Change-Id: Ibea5bdea58711e96faff4937ecccedcc695d9ba4
Signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
As on Witherspoon, some VRMs on Swift need their AVS buses enabled
as part of the power on sequence. The AVS bus connects those VRMs
to the processors so the processors can set voltages.
On Witherspoon, the sequence was
1. Disable the AVS bus
2. Manually set VRM voltages
3. Enable AVS bus
Currently on Swift there is no need to manually set voltages, so
the AVS bus disable service and script isn't required.
Tested: Tested on swift, and ensured both witherspoon and
witherspoon-128 still have all avs scripts and
services installed.
(From meta-ibm rev: f1ceece0b75a4522ef3089319b12d22fd83ed9ef)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ifd7ebdd5ec3dcdfef97c04e666d83fcb4991b452
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
Fix association path when resolving input faults
(From meta-ibm rev: aa31db48bd98f4d22b8b0b6a6316aefcd4bc5daa)
Change-Id: I3813ee4174d6aeebc6c7014d4b7d059e65b9ad99
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Swift MRW has been updated and this commit utilizes some unused
sensors for Swift starting at 0xFE and counting backwards
(From meta-ibm rev: df212c93689bd73f0e760ed3cfffada6fa6b9ffa)
Change-Id: Ica981d322f51fec94c0db94884938a60b637eb73
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
A lot of cleanup of IPMI sensors in this update
(From meta-ibm rev: e80fecfd67ea850b6dba5af303e97ad7f8896ea6)
Change-Id: Icd26b566002bf34b09b936300e89cd1a8fa4b9a5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (2):
Update .gitignore
Don't try to read GPIOs when no device path
(From meta-ibm rev: adf123779de48ee17f2d8c53f4e3d865e575c2f9)
Change-Id: Ia97046f0d856266907831be9fc552d6d750d14f9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Use an override in bbappends in meta-witherspoon as described and
recommended in the "following best practices when creating layers"
section of the the Yocto development tasks manual.
ibm-ac-server represents common machine configuration shared by all of
IBMs "Accelerated Compute" class of servers. Apply it wherever any
variables are un-bounded by any override.
This enables more flexible use of meta-witherspoon in build
configurations, and easy addition of machines to the layer.
(From meta-ibm rev: bb0e1d0699a4b9905c053c94af7d882cd71779fc)
Change-Id: I82f7338b0d7a64b5e7a67e19bcdff07f48a332d4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-ibm rev: 8f7ff601395419a933eb0506d5cc07fd805f7708)
Change-Id: Iffb2c550511b4024b721c2ba81aec1f909ce7703
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
As of today the IBM(witherspoon) layer supports three of IBMs
"Acclerated Compute" class of systems: witherspoon, witherspoon-128 and
swift.
Most of the bbappends are required for all three. Prior to this patch
this was handled by bbappending without any override. This is counter
to best practices and pollutes the metadata for layer users using
recipes from meta-witherspoon.
Add a new ibm-ac-server MACHINEOVERRIDE so that bbappends that work on
all of IBM's AC systems can be overridden appropriately without having
to explicitly list every system.
(From meta-ibm rev: b770d19fc3e9774a1ad80be55b2f986d02847c26)
Change-Id: I69ae41fa80612d1c019f031a02e32c01580b7939
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The ordering of the values in MACHINEOVERRIDES is wrong:
MACHINEOVERRIDES="witherspoon-128:witherspoon"
This means that:
FOO_witherspoon = "bar"
will override:
FOO_witherspoon-128 = "baz"
which is the opposite of expectation. The ordering is a function of
config file include order and choice of the predot vs postdot operator.
Use the same include ordering and dot operators as meta-fsl-arm to get
the overrides to appear in MACHINEOVERRIDES in the correct order such
that the expected semantics are provided and:
FOO_witherspoon-128 = "bar"
will override:
FOO_witherspoon = "baz"
(From meta-ibm rev: a12ff8392546591d8b52927da983dd76d2c0f1bd)
Change-Id: I823e236bd0147cc058052d85778b522e74fabb28
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Using a distro feature here might be a case of too much abstraction.
Instead, just enable them because that is what is desired for those
systems. This is slightly easier to comprehend.
Revisit, if at a later time, several phosphor-software-manager users
enable signature verification and file syncing when using UBI (making
the abstraction useful). If/when that occurs, those configure options
and packages should be enabled via the distro feature in the base
recipe and not in a bbappend.
(From meta-ibm rev: 50eebe208babfe35ccd5a3ed8d560669381e82a5)
Change-Id: Ic4ac7f89eeb4575e6dabb68bb61aa55835316864
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit adds the xyz.openbmc_project.Inventory.Item.Accelerator
interface to IPMI GPU functional sensors.
This was something done earlier by commit
f510f7b6b708b22db1f08faf369994f01edd0ddc.
The same is being ported now to the new sensor config YAML.
Tested:
Loaded this change up on a witherspoon. Verified that the
inventory objects created by host-ipmid now implement the
xyz.openbmc_project.Inventory.Item.Accelerator interface.
busctl call xyz.openbmc_project.ObjectMapper /xyz/openbmc_project/object_mapper
xyz.openbmc_project.ObjectMapper GetSubTree sias
"/xyz/openbmc_project/inventory" 0 1
"xyz.openbmc_project.Inventory.Item.Accelerator"
a{sa{sas}} 6
"/xyz/openbmc_project/inventory/system/chassis/motherboard/gv100card0"
....
....
(From meta-ibm rev: 2b99559bff775f719fb79a5a770b5267bbbd6dcc)
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Change-Id: Ic132c417aca171e23f5d72705461fe3378e194b0
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
There are two directory names in the path that are different based
on the I2C bus.
(From meta-ibm rev: d4f13c672063f32ce6aafdaaf63ce34e79f7a4b5)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I37288264ff5098f75780c243b47f46f312f98854
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Do what poky does and add a (commented out) MACHINE entry for each
supported machine. MACHINE=witherspoon remains the default.
This makes is clear to anyone looking at local.conf.sample what machines
are supported by the layer.
(From meta-ibm rev: 275e64f3c4b4b6c6b84985f8000c3def18d1da0d)
Change-Id: I83bd116e137aa9380a95abe5069f1a9c21df6983
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Use typical bitbake metadata style and use double instead of single
quotes, and put the append operator prior to the override.
(From meta-ibm rev: 5670481726ee9e986090498e921f446ed61f1b84)
Change-Id: I744a54540b671b534f1eb1cac0a87e1891c782be
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|