Age | Commit message (Collapse) | Author | Files | Lines |
|
Peter has moved to another team and is no longer working on OpenBMC
efforts. Remove him from the reviewers list for meta-nuvoton.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Id0187f9925b35c72730ed6cce94a6189b4501de0
|
|
The latest arm/optee support 3.19, but we don't have 3.19 support yet.
Currently, we need to use 3.18 as preferred version for build pass.
Once we have support 3.19 then we will update new bbappend for 3.19.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I02bc26d05ee4f647c2cd2803a9ce1488dcfc738d
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I8e54833ac78e540e9dd5011533d53ff9a3af6763
|
|
Changelog:
TIP_FW_L0_0.5.3_L1_0.4.2
==============
- TIP_FW L0 version 0.5.3 and L1 version 0.4.2 L1
- FreeRTOS: in case of assert: print useful info.
- NVIC_BMC_reset: clear NVIC int before reloading BMC.
- in BMC reset and spurious interrupt reset: read the int number from
the active and not the pending.
- NVIC_IntHandlerCommon: bug fix: clear correct number.
- Big fix: enable all traps in hardware_app_init.
- Add task bmc_task to handle BMC reset reload.
- Increase heap_size to 0xA000.
- HOSTPER: set to 1 till KCS bug is fixed.
- Flash: check if FIU1 and FIU 0\CS1 are disabled by OTP bit.
- Flash: bug fix: do not enable FIU1 CS2\3.
- Flash: Allow using a 4MB flash for image.
- Update FreeRTOS to none-MPU version.
- Spurious interrupt handling: in case of spurious interrupt print
correct int number + NVIC state, and then clear it.
- OTP version: use two bits for each version number.
- Copy DBGRST too to INTCR2.
- Debug log: bug fix: data corruption in case of a 16MB flash. Replace
the code so that Debug log is 64KB (one flash block). its location is
- split flash for active recovery: 64KB before recovery image.
- two flash mode: last block in active flash.
- UUID: add full data read (wafer, X\Y, year, work week). Note: debug
chips do not contain this info.
TIP FW 0.5.1 L0 0.4.0 L1
==============
- Set RCR regs only in PORST.
- Change RCR values for TIP reset.
- NVIC: print more data on spurious interrupts.
- SPIX - set FIU_FIX to SINGLES. Other FIUs remain in INCREASING mode as
before.
TIP FW 0.5.1 L0 0.4.0 L1 GOOGLE4
==============
- derived from TIP FW 0.5.1 L0 0.4.0 L1
Tested:
buid pass and boot up successful with correct TIP FW latest version.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I2b5093470d6caa2e26bb287ec7dda3a8d0c4404c
|
|
Changelog:
IGPS 03.08.03 - Jan 9th 2023
==============
- TIP_FW 0.5.3 L0 0.4.2 L1
- FreeRTOS: in case of assert: print useful info.
- NVIC_BMC_reset: clear NVIC int before reloading BMC.
- in BMC reset and spurious interrupt reset: read the int number from
the active and not the pending.
- NVIC_IntHandlerCommon: bug fix: clear correct number.
- Big fix: enable all traps in hardware_app_init.
- Add task bmc_task to handle BMC reset reload.
- Increase heap_size to 0xA000.
- HOSTPER: set to 1 till KCS bug is fixed.
- Flash: check if FIU1 and FIU 0\CS1 are disabled by OTP bit.
- Flash: bug fix: do not enable FIU1 CS2\3.
- Flash: Allow using a 4MB flash for image.
- Update FreeRTOS to none-MPU version.
- Spurious interrupt handling: in case of spurious interrupt print
correct int number + NVIC state, and then clear it.
- OTP version: use two bits for each version number.
- Copy DBGRST too to INTCR2.
- Debug log: bug fix: data corruption in case of a 16MB flash. Replace
the code so that Debug log is 64KB (one flash block). its location is
- split flash for active recovery: 64KB before recovery image.
- two flash mode: last block in active flash.
- UUID: add full data read (wafer, X\Y, year, work week). Note: debug
chips do not contain this info.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ie2d5086127da69f94d7b5cbe55ed89b1e6e49f30
|
|
Changelog:
- Add flag CERBERUS_SECURE_BOOT_ONLY. No udpate, recovery and logging.
Change-Id: Id242eca001cadd7e6a0ed116300baa87f56a0ddb
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
|
|
Also remove Google-specific version since it has been merged into the
mainline branch.
Changelog:
IGPS 03.08.00 - Dec 15th 2022
==============
- TIP_FW: 0.5.0 L0 0.3.9 L1
- Code cleanup for production.
- bug fix key selection during recovery.
- Add DME+RIOT data export to PCI MBOX.
- align BMC and TIP that both will use PLL2 and not CLKREF.
- Bug fix: don't save previous INTCR2 for reset indication.
- Bug fix: update flow using wrong KMT.
- TIP_FW: 0.5.0 L0 0.3.9 L1 GOOGLE3
- aligned to the above release.
- split SFDP
- enable flag CERBERUS_SECURE_BOOT_ONLY
- uboot https://github.com/Nuvoton-Israel/u-boot/releases/tag/v2021.04-npcm8xx-20221215
- OpTee: https://github.com/Nuvoton-Israel/optee_os/releases/tag/npcm845x_3.18.0_v1.0
- linux offset 4MB.
- Update scripts to sign in yocto build (signatures only).
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: I396a8e05bc6aa53fd6c7062ed342ce1f26b7e2fb
|
|
Changelog:
version 0.2.8 - Nov 22 2022
=============
- Bug fix: disable RECALIB in DDR, after training, before sweep phase.
- eSPI: enable auto handshake.
Version 0.2.6 - Oct 26 2022
=============
- Bug fix: If DRAM is 2GB and max DRAM size in header is smaller, GMMAP
should be set according to header, not according to the physical
device.
Version 0.2.4 - Oct 18 2022
=============
- MC: Support 2GB DRAM
- MC: Updated TRFC default to 2GB DRAM and fixed value for 1600/1G
- CLK: always set PLLs by bootblock. Set all dividers in PORST.
- SPI-X: upper limit of 33MHz.
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: Ia82fba195139d245ccb7f62218a900069c575e2c
|
|
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Iaf52326b89e459c17694567c4fbdd7dc874183e3
|
|
According to commment in https://gerrit.openbmc.org/c/openbmc/openbmc/+/57718/4
We have split out the generic meta-nuvoton defconfig change from the EVB change
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I95a53bc4acc39bad21787c059f2e6cde24c3e43e
|
|
Follow the other npcm8xx recipes to use different versions of this
recipe for different platforms.
Tested: build pass and boot up successfully with correct bootblock
version.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ic97de46876e7e821b65515846d40c939d273bcc1
|
|
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I9bfe4ed6065c7f031bfd2bedc2c6eaedc7a5ee62
|
|
IGPS 03.07.03 - Oct 12 2022
==============
- U-boot 2021.04-npcm8xx-20221011
- TIP_FW 0.4.6 L0 0.3.5 L1
- Support all board types (flash connections detected at runtime)
- Bootblock XML: return FIU to 50MHz in bootblock header
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I2bf9fe80c8d66d83109d8aa67c0461f828abfef0
|
|
Joseph Fu (1):
dts: npcm730 GBS: update uboot dts for npcm-v2021.04
Joseph Liu (1):
configs: arbel: update uimage_flash_addr to 0x80400000
Stanley Chu (7):
env: Support ENV offset behind the U-boot image
env: print env offset if uboot pointer is enabled
configs: arbel: add defconfig for enabling uboot_pointer feature
spi: npcm_fiu: support spix
dts: nuvoton-npcm845-evb: enable spix
configs: npcm8xx: change env offset
configs: arbel: change ramdisk load address
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I44ca7bb622ceb721400f3ce14254de7545c6bc35
|
|
Tested: buid pass and boot up successful when loading BB at 0x80000 for example
Verified by bootblock log as below:
==========
Load bootblock
==========
tip_firmware_image_init fiu0 cs0 BOOTBLOCK
tag U. scan from 0x80000000 to 0x88000000
tip_firmware_image_scan_flash BOOTBLOCK found addr 0x80080000 dst 0xfffd0000
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I62eced6d80b48d488348d43468f8f01edf83d79a
|
|
The `{A,B}` expansion syntax is a bash extension which isn't supported
on some other shells.
Tested: Built successfully with non-bash shell
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: Iae3168e0699d0e399b0f1dcfbd978dcc16aadbf5
|
|
These versions of IGPS and the TIP FW have customizations for Google.
Other users of npcm8xx can add customized or pinned versions here too as
necessary.
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: I14001205636fd9697f7953594c3d02ad58b398a1
|
|
This method is less likely to break and require fixes when Nuvoton
adjusts the XML files.
Tested: Still able to build successfully
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: Ib8e67b67cd837d1d5510ab326012d0644b3a2780
|
|
This will allow us to use different versions of this recipe for
different platforms.
Tested: No impact to the resulting recipe
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: I90cf725589c5df48d17668bf8afe3ef3db7d8e2e
|
|
This will allow us to use different versions of this recipe for
different platforms.
Tested: No impact to the resulting recipe
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Change-Id: I5a4e58d0a013ab5ac3df5ff47f02c8004ead6249
|
|
- TIP_FW L0 version 0.4.6 and L1 version 0.3.5 L1
- Support all board types (flash connections detected at runtime)
- To be used in IGPS 3.7.3 and above
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ic4a4e74bb266a0d106af483047cda261dd94788e
|
|
https://gerrit.openbmc.org/c/openbmc/openbmc/+/55099 added npcm8xx-igps
together with a patch, and later npcm8xx-igps SRCREV was bumped in
https://gerrit.openbmc.org/c/openbmc/openbmc/+/57109, but the patch was
not refreshed. This would cause fuzz detected.
Change-Id: Iaeaf5aa8091b347039ed4cfa187e252e60660f00
Signed-off-by: Anthony <anthonyhkf@google.com>
|
|
break
Due to the changes in binutils, when there is any warning during the
linking, it would be treated as a fatal error, breaking the compilation.
Similar fix is added in https://github.com/OP-TEE/optee_os/pull/5474
Optee-os already apply patch in optee/optee-os/0008-no-warn-rwx-segments.patch
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I4a6a688a0fc1c928092d3f6750e79fd8dc23afe7
|
|
Version 0.2.3 - Sep 20 2022:
1. MC: set bit 8 for DLL reset after writing to MRS registers.
2. Flash: remove scan for uboot.
3. Remove FIU driver (not used).
Tested: build pass and boot up successful
>================================================
> Arbel A35 BootBlock by Nuvoton Technology Corp. Ver 0.2.3
>================================================
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I271318595382795153b24e646bdd56d087e1eabc
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
|
|
Nuvoton's npcm8xx full flash image includes TIP FW, Bootblock,
ATF, OPTEE and UBOOT with headers. Generating headers and merging
images are being done by Nuvoton's binary generator tool (Bingo)
which uses external parameters from XML files for that.
Thus, we need to add related fitimage and image type for npcm8xx.
However, before merge this commit, we must wait for below commits were merged.
meta-nuvoton: arm-trusted-firmware: add arm trusted firmware recipe
https://gerrit.openbmc.org/c/openbmc/openbmc/+/55234
meta-nuvoton: add npcm8xx-bootblock recipe
https://gerrit.openbmc.org/c/openbmc/openbmc/+/55117
meta-nuvoton: add npcm8xx-igps recipe
https://gerrit.openbmc.org/c/openbmc/openbmc/+/55099
meta-nuvoton: npcm7xx-bingo: upgrade latest version 0.0.5 support Arbel
https://gerrit.openbmc.org/c/openbmc/openbmc/+/55128
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I4599e39d3873f07cde6904d0f10161964fc45c7a
|
|
Add optee-os and optee-os-tadevkit bbappend
version 3.18.0 base for Nuvoton npcm8xx SOC
Change-Id: I0d3dae985f53f250fbfbc28c431b0e4532f828e8
Signed-off-by: Tim Lee <timlee660101@gmail.com>
|
|
Add for supporting Nuvoton npcm8xx SOC.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ib402cb769f3e97abc05eeb8d147d3f7f3fd71f0a
|
|
Dhananjay asked me to add him to the reviewers list for meta-nuvoton.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Id9fae80ece5fceef4630e8c05a5c9a08147a2bb4
|
|
Upgrade IGPS from 03.06.02 to 03.06.04 and remove duplicate deploy
Previous npcm8xx-ipgs recipe will deploy BB and TIPFW binary.
However, BB and TIPFW recipes already were merged recently.
They will do their own deploy task individually.
Thus, we should remove duplicate deploy in igps recipe.
IGPS 03.06.04 - Aug 14 2022
==============
- TIP_FW 0.4.1 L0 0.2.6 L1
* flash driver bug fixes.
* Core reset bug fix: CORSTC: set to 1s, except MC bit
* Do not continue if BMC fail to boot.
* RESSR: copy values from TIP_SCR1 to INTCR2. Print last reset type.
* OEM: read 2 bytes from OTP (was 1).
- Bootblock is alligned to 512KB.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Id0b7336f0b2ada9e43385d635f3e3536a70aad8d
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iff75df9a12e83e0f480118f4c867ac5cba96a986
|
|
The Arbel NPCM8XX requires a TIP FW image which handles various security tasks.
Releases/TIP_FW_L0_0.4.1_L1_0.2.6 version:
1. Flash driver bug fixes.
2. Bug fix CS1 slew rate.
3. Print all SFDP info.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I54c0c7b46972b7a261c5d8c73472ae57c2346fb7
|
|
The Arbel NPCM8XX requires a bootblock image that will initiate
the DRAM and basic HW settings.
First release constrains only binaries. Version is A35_BootBlock_0.2.2
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ia5904dca98c44df8ed4c2af6f599965ccfd4aec2
|
|
IGPS 03.06.02 - Jul 24 2022
==============
- Restore Z1 XMLs.
- Bug fix ReplaceComponent.bat
- Add fiu clk dividers fields to Bootblock header xml.
- TIP FW: 0.3.9 L0 0.2.4 L1:
- virtual flash bug fix: use memcy instead of tip_memcpy.
- shared attestation hash is 512.
- tip_mbx bug fixes.
- tip_combo: return early if failed to find image.
- init WD0RCR, 2, 3 before BMC starts.
- check load and verify return status. if verify tip images fail in secure boot, restart.
- Bootblock: 0.2.2
- Fix GMMAP value for 2GB and 512MB.
- Add 3 FIU dividers to the the header (require IGPS 3.6.2 and above)
- Bug fix: add support for ODT termination of zero (termination disabled).
- Print pass\fail criteria for sweeps. Need to enable debug prints to use.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ibd19031adf33d6a6ec5ada905490ba50c92e1948
|
|
It is also backward compatible for Poleg.
Tali Perry (5):
First release version 0.0.2
Makefile on root
bingo: add npcm8xx fields support
Update README: version 0.0.5 for Arbel
bingo 0.0.5
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: Ieeaaae338971f3e1f2ed20746089e72560b5e76f
|
|
Peter D has been doing some early prototype work for Meta
with the Nuvoton hardware. Adding him as a reviewer to
the meta.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0123a516c5fbedaf65ef032409b9c7d4c075a9b4
|
|
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I5922de3f0f28932e212f0b5f0d7d6b92af6c0c9f
|
|
SYSFS_DEPRECATED and SYSFS_DEPRECATED_V2 is no longer needed.
Signed-off-by: Brian Ma <chma0@nuvoton.com>
Change-Id: Ie2920b37db6c81a4e5cce067d39aad564fc4aadd
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I746b04e1e36abaf2ff3852beb8a04535692442c1
|
|
The LICENSE string 'GPLv2+' is considered obsolete by Yocto and raises a
warning. Switch them too the accepted tag 'GPL-2.0-or-later'.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I88c639dbb45762e2e019a3503f1f1930b65c09d6
|
|
Charles Boyer (1):
Add Fii Mori project DTS and DTSI files
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I8fe7a6cb0d9bc036cebc2dc223181961f96b4a7e
|
|
* Deprecate N-1 release (hardknott).
* Enable N+1 release (kirkstone).
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
|
|
The MAINTAINERS files are no longer used and are out of date (references
to IRC still exist in most of them). Remove them and rely on the OWNERS
exclusively.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0f5d2719ad97e218ce03c4503efe1b1c92ac455e
|
|
Mustafa Shehabi (1):
dts: npcm730 kudo: update GPIO203 in dtsi
Change-Id: I832de8218da185428661edee55a21aed3828257f
Signed-off-by: Mustafa Shehabi <mustafa.shehabi@fii-na.com>
|
|
e.g.
WARNING: /opt/openbmc/meta-nuvoton/recipes-nuvoton/loadsvf/loadsvf_git.bb: Recipe loadsvf sets S variable with trailing slash '/opt/openbmc/build/gsj/tmp/work/armv7a-openbmc-linux-gnueabi/loadsvf/git-r1/git/', remove it
Signed-off-by: Peter Foley <pefoley@google.com>
Change-Id: Idcfa1306b54ad921519cb2a41f9ccb36f8bb26ac
|
|
Per [1], Yocto is going to start requiring both branch names and
`protocol=https` in GitHub SRC_URI variables. Ran the upstream tool to
automatically fix our URIs.
1. https://git.yoctoproject.org/poky/tree/documentation/migration-guides/migration-3.5.rst#n10
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5f9619f7ff707050b469ae74c8aa16846568c5e4
|
|
Stanley Chu (1):
driver: i2c-npcm7xx: extend the timeout of ack cycle on receving.
Fran Hsu (1):
dts: npcm730 GSZ: update the GPIO default setting.
Signed-off-by: Fran Hsu <fran.hsu@quantatw.com>
Change-Id: Ia2ae99c32dd77255f1bba5b4ccc757fdd5a31469
|
|
The obmc-system-mgmt feature is currently used in the image to trigger
inclusion of a virtual-provider which provides a number of packages many
systems need. Partially revert the removal of this feature so that
the outcome is:
1. The empty obmc-phosphor-sysd package is still removed.
2. By default the 'obmc-system-mgmt' feature is included, unless
specifically exempted.
3. All EVB platforms remove the 'obmc-system-mgmt' feature since
they have no system they are managing.
This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526.
Tested:
* Built `bletchley` and confirmed `packagegroup-fb-apps-system` and
`entity-manager` are present.
```
entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0
packagegroup-fb-apps-system all 1.0-r1
```
* Built `witherspoon` and confirmed `packagegroup-op-apps-system` and
`pdbg` are present.
```
packagegroup-op-apps-system noarch 1.0
pdbg arm1176jzs 3.3
```
* Ran `bitbake -p` on `evb-ast2600` to confirm the undefined
`virtual-obmc-system-mgmt` is not being included in the image.
Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
This moves the OpeNBMC kernel to a v5.14 base. There are 78 patches in
the tree, plus a the MCTP core and device tree changes that were merged
in v5.15 which have been backported.
Andrew Jeffery (11):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
ARM: dts: p10bmc: Drop the openbmc, mctp-lpc node
ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP binding
ARM: dts: aspeed: p10bmc: Enable KCS channel 2
ARM: dts: tacoma: Clean up KCS nodes
B. J. Wyman (2):
ARM: dts: aspeed: Rainier remove PSU gpio-keys
hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
Brad Bishop (3):
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
eeprom: at25: Split reads into chunks and cap write size
Cédric Le Goater (19):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (11):
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
spi: fsi: Reduce max transfer size to 8 bytes
dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible
fsi: occ: Force sequence numbering per OCC
hwmon: (occ) Remove sequence numbering and checksum calculation
Fran Hsu (2):
ARM: dts: nuvoton: npcm730: Add UDC device
ARM: dts: nuvoton: gsj: Add non-mainline nodes
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Isaac Kurth (1):
ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (4):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: dts: ast2600evb: Enable EHCI controller
ARM: dts: aspeed: rainier: Enable earlycon
ARM: configs: aspeed: Add openbmc kernel options
Tomer Maimon (21):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: dts: npcm7xx: Add out of tree nodes
ARM: dts: olympus: Add non-mainline nodes
ARM: dts: npcm750: Add fuse regmap support node
ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
clk: npcm7xx: add read only flag to divider clocks
iio: adc: Add calibration support to npcm ADC
watchdog: npcm: Add DT restart priority and reset type support
pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
pinctrl: pinconf: add pin persist configuration
pinctrl: npcm7xx: Add pin persist configuration support
spi: npcm-pspi: Add full duplex support
dt-binding: bmc: add NPCM7XX JTAG master documentation
misc: Add NPCM7xx JTAG master driver
watchdog: npcm: Modify get reset status function
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
William A. Kennington III (1):
net: npcm: Support for fixed PHYs
Change-Id: I315000ab63c3f6a34d99cf25e366fa0781c85d46
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
We've typically kept these LAYERSERIES_COMPAT to 2 releases: the current
and the upcoming. Remove 'gatesgarth' is it is now 2 releases back.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5e812a94fed1738898af75c0fdee81996a5bbf20
|