Age | Commit message (Collapse) | Author | Files | Lines |
|
Upstream poky made a commit that adds an `/etc/motd` with a strong
warning that meta-poky is not intended to be used for production
purposes. There isn't anything we use directly from meta-poky anymore,
so clean up all references to it.
See poky commit a226865c8683398b5f58628ba2ec5aee1ee6c19d for additional
context.
We could potentially switch from using the `poky` subtree to picking
up OECore directly, but right now it also provides us a qualified set of
OECore + bitbake.
Tested: Built yosemite4 and confirmed `motd` output is absent when
SSHing in.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I9c08650d2278b3ba26794c009adad3e593767f58
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I28ee50fa55ae47dd7fd8c99f8f6db8f5f6dfa53d
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I85272779478b66452acd11be93f5fea99e4c3a34
|
|
This moves the OpenBMC kernel to a v6.5 base for ASPEED.
The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device
tress are now under an 'aspeed' subdirectory. This change means systems
must describe the KERNEL_DEVICETREE with the aspeed directory prefix.
There are 78 patches in the tree, with 40 of those patches not
yet queued for merging in v6.6.
The remaining out of tree patches include:
Andrew Jeffery (6):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
Cédric Le Goater (1):
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (16):
ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
soc: aspeed: xdma: Add trace events
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
eeprom: ee1004: Enable devices on multiple busses
dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom
eeprom: ee1004: Add OF matching support
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
leds: Ensure hardware blinking turns off when requested
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (14):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Add secure boot controller support
dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
ARM: dts: nuvoton: npmc750-evb: Add default console
tpm: tis-i2c: Add more compatible strings
leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()"
arm64: configs: Add Nuvoton NPCM defconfig
ARM: configs: aspeed: Add new FSI drivers
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
ARM: config: aspeed: Add Ampere SMPro drivers
ARM: config: Add openbmc defconfig
ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx
Johannes Holland (1):
dt-bindings: tpm: Add schema for TIS I2C devices
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I8e54833ac78e540e9dd5011533d53ff9a3af6763
|
|
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I65febeeec11e6e5b40ee728f42cfbe77023dae1e
|
|
We also need to move the conf-notes.txt files.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ic44e015c0216b526de4fec277ad42f162bca1f33
|
|
The latest poky commit is requiring us to have all of
our template configs in a subdirectory instead of directly in
the `conf` directory. Without this we end up with errors during
setup like:
```
Error: TEMPLATECONF value (which is .../openbmc/meta-facebook/meta-bletchley/conf) must point to meta-some-layer/conf/templates/template-name
```
Fix this by moving all of our template files into the 'default'
template subdirectory (following the pattern of poky) and modifying
`setup` as necessary to follow.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iecefde73d55acbb6bc63ae3d68c4311adaf327ae
|
|
Per [1][2], Yocto is starting to deprecate ABORT and has replaced
the "ABORT" action in BB_DISKMON_DIRS entries with "HALT".
1. https://wiki.yoctoproject.org/wiki/Inclusive_language
2. https://git.yoctoproject.org/poky/commit/?id=4f77505d94a8f6260933f457e9848d1d2fa98ce5
Tested:
Built obmc-phosphor-image successfully and eliminate the following
warnings:
```
WARNING: The BB_DISKMON_DIRS "ABORT" action has been renamed to
"HALT", update configuration
```
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: If57d0ded9fac41e23b31b01e2a0e309ac7388148
|
|
* Deprecate N-1 release (hardknott).
* Enable N+1 release (kirkstone).
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I39e027e02dab64b4390b46ffbd9c299c858f403e
|
|
Commit 605c37cb989a95c02633fcb93efb45102781b4bb switched the tree to use
'package_ipk' instead of 'package_rpm'. Since then a few other systems
have gone in which used an old package setting. Sync them to use IPK.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Iecd2f65871038d6139c87f910c7c7fb19a115067
|
|
Add network bonding configuration and name resolution configuration for S6Q.
Tested:
There are two interfaces eth0 and eth1 bonded to bond0. Bonding details can be found at /proc/net/bonding/bond0.
Signed-off-by: Jerry Wan <jerry.wan@quantatw.com>
Change-Id: Ic11fbc3a8ea3ac4859e60a62288e9c2e03f6f41e
|
|
These config files contains the gpio configuartion which will be used by
the x86 power control.
Tested: Tested and verified in S6Q.
Change-Id: I3e2684b2d7b0e6f3c6eb874569d5c82f6b733e02
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
|
|
Initial introduction of Quanta S6Q family equipped with Aspeed 2600 BMC
SoC.
Tested:
1. Build Quanta S6Q board and load on the target hardware.
2. Ensure that BMC boots to console.
Change-Id: Ia16d5fd6e38e2191908c0bec44cb412be254a433
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
|