diff options
author | Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> | 2020-03-24 03:25:58 +0300 |
---|---|---|
committer | Bjorn Helgaas <bhelgaas@google.com> | 2020-03-28 19:52:22 +0300 |
commit | 6d2c89441571ea534d6240f7724f518936c44f8d (patch) | |
tree | c1cb538207b3c6eb192c367ac8a069838f24da37 /Documentation/PCI/pcieaer-howto.rst | |
parent | b5dfbeacf74865a8d62a4f70f501cdc61510f8e0 (diff) | |
download | linux-6d2c89441571ea534d6240f7724f518936c44f8d.tar.xz |
PCI/ERR: Update error status after reset_link()
Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But during fatal error
recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT
or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using
reset_link()) pcie_do_recovery() will report the recovery result as
failure. Update the status of error after reset_link().
You can reproduce this issue by triggering a SW DPC using "DPC Software
Trigger" bit in "DPC Control Register". You should see recovery failed
dmesg log as below:
pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000
pcieport 0000:00:16.0: DPC: software trigger detected
pci 0000:04:00.0: AER: can't recover (no error_detected callback)
pcieport 0000:00:16.0: AER: device recovery failed
Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
[bhelgaas: split pci_channel_io_frozen simplification to separate patch]
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Diffstat (limited to 'Documentation/PCI/pcieaer-howto.rst')
0 files changed, 0 insertions, 0 deletions