Documentation/arm/sa1100: Remove some obsolete documentation

The support for the following boards, among others, was removed in 2004
with commit "[ARM] Remove broken SA1100 machine support.":

- ADS Bitsy
- Brutus
- Freebird
- ADS GraphicsClient Plus
- ADS GraphicsMaster
- Höft & Wessel Webpanel
- Compaq Itsy
- nanoEngine
- Pangolin
- PLEB
- Yopy

Tifon support has been removed in 2.4.3.3.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

1 files changed, 0 insertions, 51 deletions

diff --git a/Documentation/arm/sa1100/adsbitsy.rst b/Documentation/arm/sa1100/adsbitsy.rst
deleted file mode 100644
index c179cb26b682..000000000000
--- a/Documentation/arm/sa1100/adsbitsy.rst
+++ /dev/null
@@ -1,51 +0,0 @@
-===============================
-ADS Bitsy Single Board Computer
-===============================
-
-(It is different from Bitsy(iPAQ) of Compaq)
-
-For more details, contact Applied Data Systems or see
-http://www.applieddata.net/products.html
-
-The Linux support for this product has been provided by
-Woojung Huh <whuh@applieddata.net>
-
-Use 'make adsbitsy_config' before any 'make config'.
-This will set up defaults for ADS Bitsy support.
-
-The kernel zImage is linked to be loaded and executed at 0xc0400000.
-
-Linux can  be used with the ADS BootLoader that ships with the
-newer rev boards. See their documentation on how to load Linux.
-
-Supported peripherals
-=====================
-
-- SA1100 LCD frame buffer (8/16bpp...sort of)
-- SA1111 USB Master
-- SA1100 serial port
-- pcmcia, compact flash
-- touchscreen(ucb1200)
-- console on LCD screen
-- serial ports (ttyS[0-2])
-  - ttyS0 is default for serial console
-
-To do
-=====
-
-- everything else!  :-)
-
-Notes
-=====
-
-- The flash on board is divided into 3 partitions.
-  You should be careful to use flash on board.
-  Its partition is different from GraphicsClient Plus and GraphicsMaster
-
-- 16bpp mode requires a different cable than what ships with the board.
-  Contact ADS or look through the manual to wire your own. Currently,
-  if you compile with 16bit mode support and switch into a lower bpp
-  mode, the timing is off so the image is corrupted.  This will be
-  fixed soon.
-
-Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!