Merge tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.11-rc1

  Lots of different things in here:

   - loads of driver updates

   - so many coding style cleanups

   - new IIO drivers

   - Android ION code is finally removed from the tree

   - wimax drivers are moved to staging on their way out of the kernel

  Nothing really exciting, just the constant grind of kernel development :)

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits)
  staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe()
  staging: most: Fix spelling mistake "tranceiver" -> "transceiver"
  staging: qlge: remove duplicate word in comment
  staging: comedi: mf6x4: Fix AI end-of-conversion detection
  staging: greybus: Add TODO item about modernizing the pwm code
  pinctrl: ralink: add a pinctrl driver for the rt2880 family
  dt-bindings: pinctrl: rt2880: add binding document
  staging: rtl8723bs: remove ELEMENT_ID enum
  staging: rtl8723bs: remove unused macros
  staging: rtl8723bs: replace EID_EXTCapability
  staging: rtl8723bs: replace EID_BSSIntolerantChlReport
  staging: rtl8723bs: replace EID_BSSCoexistence
  staging: rtl8723bs: replace _MME_IE_
  staging: rtl8723bs: replace _WAPI_IE_
  staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_
  staging: rtl8723bs: replace _ERPINFO_IE_
  staging: rtl8723bs: replace _CHLGETXT_IE_
  staging: rtl8723bs: replace _COUNTRY_IE_
  staging: rtl8723bs: replace _IBSS_PARA_IE_
  staging: rtl8723bs: replace _TIM_IE_
  ...

1 files changed, 0 insertions, 98 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt b/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
deleted file mode 100644
index df5b9f2ad8d8..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Renesas R-Car GyroADC device driver
-
-The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
-which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
-are sampled by the GyroADC block in a round-robin fashion and the result
-presented in the GyroADC registers.
-
-Required properties:
-- compatible:	Should be "<soc-specific>", "renesas,rcar-gyroadc".
-                The <soc-specific> should be one of:
-		renesas,r8a7791-gyroadc - for the GyroADC block present
-					  in r8a7791 SoC
-		renesas,r8a7792-gyroadc - for the GyroADC with interrupt
-					  block present in r8a7792 SoC
-- reg:		Address and length of the register set for the device
-- clocks:	References to all the clocks specified in the clock-names
-		property as specified in
-		Documentation/devicetree/bindings/clock/clock-bindings.txt.
-- clock-names:	Shall contain "fck". The "fck" is the GyroADC block clock.
-- power-domains: Must contain a reference to the PM domain, if available.
-- #address-cells: Should be <1> (setting for the subnodes) for all ADCs
-		except for "fujitsu,mb88101a". Should be <0> (setting for
-		only subnode) for "fujitsu,mb88101a".
-- #size-cells:	Should be <0> (setting for the subnodes)
-
-Sub-nodes:
-You must define subnode(s) which select the connected ADC type and reference
-voltage for the GyroADC channels.
-
-Required properties for subnodes:
-- compatible:	Should be either of:
-		"fujitsu,mb88101a"
-			- Fujitsu MB88101A compatible mode,
-			  12bit sampling, up to 4 channels can be sampled in
-			  round-robin fashion. One Fujitsu chip supplies four
-			  GyroADC channels with data as it contains four ADCs
-			  on the chip and thus for 4-channel operation, single
-			  MB88101A is required. The Cx chipselect lines of the
-			  MB88101A connect directly to two CHS lines of the
-			  GyroADC, no demuxer is required. The data out line
-			  of each MB88101A connects to a shared input pin of
-			  the GyroADC.
-		"ti,adcs7476" or "ti,adc121" or "adi,ad7476"
-			- TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode,
-			  15bit sampling, up to 8 channels can be sampled in
-			  round-robin fashion. One TI/ADI chip supplies single
-			  ADC channel with data, thus for 8-channel operation,
-			  8 chips are required. A 3:8 chipselect demuxer is
-			  required to connect the nCS line of the TI/ADI chips
-			  to the GyroADC, while MISO line of each TI/ADI ADC
-			  connects to a shared input pin of the GyroADC.
-		"maxim,max1162" or "maxim,max11100"
-			- Maxim MAX1162 / Maxim MAX11100 compatible mode,
-			  16bit sampling, up to 8 channels can be sampled in
-			  round-robin fashion. One Maxim chip supplies single
-			  ADC channel with data, thus for 8-channel operation,
-			  8 chips are required. A 3:8 chipselect demuxer is
-			  required to connect the nCS line of the MAX chips
-			  to the GyroADC, while MISO line of each Maxim ADC
-			  connects to a shared input pin of the GyroADC.
-- reg:		Should be the number of the analog input. Should be present
-		for all ADCs except "fujitsu,mb88101a".
-- vref-supply:	Reference to the channel reference voltage regulator.
-
-Example:
-	vref_max1162: regulator-vref-max1162 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "MAX1162 Vref";
-		regulator-min-microvolt = <4096000>;
-		regulator-max-microvolt = <4096000>;
-	};
-
-	adc@e6e54000 {
-		compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
-		reg = <0 0xe6e54000 0 64>;
-		clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
-		clock-names = "fck";
-		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		pinctrl-0 = <&adc_pins>;
-		pinctrl-names = "default";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		adc@0 {
-			reg = <0>;
-			compatible = "maxim,max1162";
-			vref-supply = <&vref_max1162>;
-		};
-
-		adc@1 {
-			reg = <1>;
-			compatible = "maxim,max1162";
-			vref-supply = <&vref_max1162>;
-		};
-	};