dt-bindings: PCI: Convert generic host binding to DT schema

Convert the generic PCI host binding to DT schema. The derivative Juno,
PLDA XpressRICH3-AXI, and Designware ECAM bindings all just vary in
their compatible strings. The simplest way to convert those to
schema is just add them into the common generic PCI host schema.

The HiSilicon ECAM and Cavium ThunderX PEM bindings have an additional
'reg' entry, but are otherwise the same binding as well.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <andrew.murray@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 42 deletions

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 0dcb87d6554f..d6796ef54ea1 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -41,45 +41,3 @@ Hip05 Example (note that Hip06 is the same except compatible):
 				 0x0 0 0 3 &mbigen_pcie 3 12
 				 0x0 0 0 4 &mbigen_pcie 4 13>;
 	};
-
-HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
-
-Some BIOSes place the host controller in a mode where it is ECAM
-compliant for all devices other than the root complex. In such cases,
-the host controller should be described as below.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
-		   "hisilicon,hip07-pcie-ecam"
-
-- reg            : Two entries: First the ECAM configuration space for any
-		   other bus underneath the root bus. Second, the base
-		   and size of the HiSilicon host bridge registers include
-		   the RC's own config space.
-
-Example:
-	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,hip06-pcie-ecam";
-		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
-		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
-		bus-range = <0  31>;
-		msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
-		msi-map-mask = <0xffff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
-			  0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
-				 0x0 0 0 2 &mbigen_pcie0 650 4
-				 0x0 0 0 3 &mbigen_pcie0 650 4
-				 0x0 0 0 4 &mbigen_pcie0 650 4>;
-	};