Merge branch 'pci/controller/qcom'

- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
  writing out all the clock names (Manivannan Sadhasivam)

- Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar)

- Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA
  (HDMA) (Manivannan Sadhasivam)

- Enable drivers to supply the eDMA channel count since some can't auto
  detect this (Manivannan Sadhasivam)

- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)

- Override the SA8775P NO_SNOOP default to avoid possible memory corruption
  (Mrinmay Sarkar)

- Make sure resources are disabled during PERST# assertion, even if the
  link is already disabled (Manivannan Sadhasivam)

- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active
  even if other drivers don't vote for it (Krishna chaitanya chundru)

- Add Operating Performance Points (OPP) to scale performance state based
  on aggregate link bandwidth to improve SoC power efficiency (Krishna
  chaitanya chundru)

- Return failure instead of success if dev_pm_opp_find_freq_floor() fails
  (Dan Carpenter)

- Avoid an error pointer dereference if dev_pm_opp_find_freq_exact() fails
  (Dan Carpenter)

- Prevent use of uninitialized data in qcom_pcie_suspend_noirq() (Dan
  Carpenter)

* pci/controller/qcom:
  PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
  PCI: qcom: Prevent potential error pointer dereference
  PCI: qcom: Fix missing error code in qcom_pcie_probe()
  PCI: qcom: Add OPP support to scale performance
  PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps()
  PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  PCI: qcom-ep: Disable resources unconditionally during PERST# assert
  PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
  PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
  PCI: epf-mhi: Enable HDMA for SA8775P SoC
  PCI: qcom-ep: Add HDMA support for SA8775P SoC
  PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers
  PCI: dwc: Skip finding eDMA channels count for HDMA platforms
  PCI: dwc: Refactor dw_pcie_edma_find_chip() API
  PCI: qcom-ep: Add support for SA8775P SOC
  dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
  PCI: qcom: Use devm_clk_bulk_get_all() API

1 files changed, 62 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index a223ce029cab..46802f7d9482 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - qcom,sa8775p-pcie-ep
           - qcom,sdx55-pcie-ep
           - qcom,sm8450-pcie-ep
       - items:
@@ -20,6 +21,7 @@ properties:
           - const: qcom,sdx55-pcie-ep
 
   reg:
+    minItems: 6
     items:
       - description: Qualcomm-specific PARF configuration registers
       - description: DesignWare PCIe registers
@@ -27,8 +29,10 @@ properties:
       - description: Address Translation Unit (ATU) registers
       - description: Memory region used to map remote RC address space
       - description: BAR memory region
+      - description: DMA register space
 
   reg-names:
+    minItems: 6
     items:
       - const: parf
       - const: dbi
@@ -36,13 +40,14 @@ properties:
       - const: atu
       - const: addr_space
       - const: mmio
+      - const: dma
 
   clocks:
-    minItems: 7
+    minItems: 5
     maxItems: 8
 
   clock-names:
-    minItems: 7
+    minItems: 5
     maxItems: 8
 
   qcom,perst-regs:
@@ -57,14 +62,18 @@ properties:
           - description: Perst separation enable offset
 
   interrupts:
+    minItems: 2
     items:
       - description: PCIe Global interrupt
       - description: PCIe Doorbell interrupt
+      - description: DMA interrupt
 
   interrupt-names:
+    minItems: 2
     items:
       - const: global
       - const: doorbell
+      - const: dma
 
   reset-gpios:
     description: GPIO used as PERST# input signal
@@ -125,6 +134,10 @@ allOf:
               - qcom,sdx55-pcie-ep
     then:
       properties:
+        reg:
+          maxItems: 6
+        reg-names:
+          maxItems: 6
         clocks:
           items:
             - description: PCIe Auxiliary clock
@@ -143,6 +156,10 @@ allOf:
             - const: slave_q2a
             - const: sleep
             - const: ref
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          maxItems: 2
 
   - if:
       properties:
@@ -152,6 +169,10 @@ allOf:
               - qcom,sm8450-pcie-ep
     then:
       properties:
+        reg:
+          maxItems: 6
+        reg-names:
+          maxItems: 6
         clocks:
           items:
             - description: PCIe Auxiliary clock
@@ -172,6 +193,45 @@ allOf:
             - const: ref
             - const: ddrss_sf_tbu
             - const: aggre_noc_axi
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 7
+          maxItems: 7
+        reg-names:
+          minItems: 7
+          maxItems: 7
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
 
 unevaluatedProperties: false