Merge tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Other than new device support and some minor fixes this has been a
  really quiet release, the only notable things are the new drivers.

  There's a couple of MFDs among the new devices so the generic parts
  are pulled in:

   - Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
     PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
     Instruments TPS65086"

* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
  regulator: userspace-consumer: Drop event support for this cycle
  regulator: aw37503: Switch back to use struct i2c_driver's .probe()
  dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
  regulator: dt-bindings: Add Awinic AW37503
  regulator: aw37503: add regulator driver for Awinic AW37503
  regulator: tps65086: Select dedicated regulator config for chip variant
  mfd: tps65086: Read DEVICE ID register 1 from device
  regulator: raa215300: Update help description
  regulator: raa215300: Add missing blank space
  regulator: raa215300: Change rate from 32000->32768
  regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
  regulator: raa215300: Add const definition
  regulator: raa215300: Fix resource leak in case of error
  regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
  regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
  regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
  regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
  regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
  regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
  regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
  ...

20 files changed, 626 insertions, 154 deletions

diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
index 3725348bb235..02f45b5834d0 100644
--- a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -28,75 +28,37 @@ properties:
       the VSEL pin is assumed to be low.
     type: boolean
 
-  regulators:
-    type: object
-    additionalProperties: false
+  inl1-supply:
+    description: Handle to the INL1 input supply (REG5-7)
 
-    properties:
-      REG1:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
+  inl2-supply:
+    description: Handle to the INL2 input supply (REG8-9)
 
-        properties:
-          vp1-supply:
-            description: Handle to the VP1 input supply
+  inl3-supply:
+    description: Handle to the INL3 input supply (REG10-12)
 
-      REG2:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
+  vp1-supply:
+    description: Handle to the VP1 input supply (REG1)
 
-        properties:
-          vp2-supply:
-            description: Handle to the VP2 input supply
+  vp2-supply:
+    description: Handle to the VP2 input supply (REG2)
 
-      REG3:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
+  vp3-supply:
+    description: Handle to the VP3 input supply (REG3)
 
-        properties:
-          vp3-supply:
-            description: Handle to the VP3 input supply
-
-      REG4:
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
+  vp4-supply:
+    description: Handle to the VP4 input supply (REG4)
 
-        properties:
-          vp4-supply:
-            description: Handle to the VP4 input supply
+  regulators:
+    type: object
+    additionalProperties: false
 
     patternProperties:
-      "^REG[5-7]$":
+      "^REG([1-9]|1[0-2])$":
         type: object
         $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          inl1-supply:
-            description: Handle to the INL1 input supply
-
-      "^REG[8-9]$":
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          inl2-supply:
-            description: Handle to the INL2 input supply
-
-      "^REG1[0-2]$":
-        type: object
-        $ref: /schemas/regulator/regulator.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          inl3-supply:
-            description: Handle to the INL3 input supply
-
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/regulator/adi,max77857.yaml b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml
new file mode 100644
index 000000000000..d1fa74aca721
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77857.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX77857 Buck-Boost Converter
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+  - Okan Sahin <Okan.Sahin@analog.com>
+
+description: Analog Devices MAX77857 Buck-Boost Converter
+
+properties:
+  compatible:
+    enum:
+      - adi,max77831
+      - adi,max77857
+      - adi,max77859
+      - adi,max77859a
+
+  reg:
+    description: I2C address of the device
+    items:
+      - enum: [0x66, 0x67, 0x6E, 0x6F]
+
+  interrupts:
+    maxItems: 1
+
+  adi,switch-frequency-hz:
+    description: Switching frequency of the Buck-Boost converter in Hz.
+    items:
+      - enum: [1200000, 1500000, 1800000, 2100000]
+
+  adi,rtop-ohms:
+    description: Top feedback resistor value in ohms for external feedback.
+    minimum: 150000
+    maximum: 330000
+
+  adi,rbot-ohms:
+    description: Bottom feedback resistor value in ohms for external feedback.
+
+dependencies:
+  adi,rtop-ohms: [ 'adi,rbot-ohms' ]
+  adi,rbot-ohms: [ 'adi,rtop-ohms' ]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: regulator.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,max77831
+
+    then:
+      properties:
+        adi,switch-frequency-hz:
+          items:
+            enum: [1200000, 1500000, 1800000]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@66 {
+            reg = <0x66>;
+            compatible = "adi,max77857";
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+            adi,rtop-ohms = <312000>;
+            adi,rbot-ohms = <12000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
new file mode 100644
index 000000000000..c92a881ed60e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW37503 Voltage Regulator
+
+maintainers:
+  - Alec Li <like@awinic.com>
+
+description:
+  The AW37503 are dual voltage regulator, designed to support positive/negative
+  supply for driving TFT-LCD panels. It support software-configurable output
+  switching and monitoring. The output voltages can be programmed via an I2C
+  compatible interface.
+
+properties:
+  compatible:
+    const: awinic,aw37503
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+required:
+  - compatible
+  - reg
+  - outp
+  - outn
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "awinic,aw37503";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index dc626517c2ad..13b3f75f8e5e 100644
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -95,11 +95,6 @@ properties:
           Properties for a single BUCK regulator
 
         properties:
-          regulator-name:
-            pattern: "^BUCK([1-2])$"
-            description: |
-              BUCK2 present in DA9122, DA9220, DA9131, DA9132 only
-
           regulator-initial-mode:
             enum: [ 0, 1, 2, 3 ]
             description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
@@ -122,6 +117,23 @@ required:
   - reg
   - regulators
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - dlg,da9122
+                - dlg,da9131
+                - dlg,da9132
+                - dlg,da9220
+    then:
+      properties:
+        regulators:
+          properties:
+            buck2: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
new file mode 100644
index 000000000000..bad140418e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor SLG51000 Voltage Regulator
+
+maintainers:
+  - Eric Jeong <eric.jeong.opensource@diasemi.com>
+  - Support Opensource <support.opensource@diasemi.com>
+
+properties:
+  compatible:
+    const: dlg,slg51000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dlg,cs-gpios:
+    maxItems: 1
+    description:
+      GPIO for chip select
+
+  vin3-supply:
+    description:
+      Input supply for ldo3, required if regulator is enabled
+
+  vin4-supply:
+    description:
+      Input supply for ldo4, required if regulator is enabled
+
+  vin5-supply:
+    description:
+      Input supply for ldo5, required if regulator is enabled
+
+  vin6-supply:
+    description:
+      Input supply for ldo6, required if regulator is enabled
+
+  vin7-supply:
+    description:
+      Input supply for ldo7, required if regulator is enabled
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^ldo[1-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+        required:
+          - regulator-name
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@75 {
+            compatible = "dlg,slg51000";
+            reg = <0x75>;
+            dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+            vin5-supply = <&vreg_s1f_1p2>;
+            vin6-supply = <&vreg_s1f_1p2>;
+
+            regulators {
+                ldo1 {
+                    regulator-name = "slg51000_b_ldo1";
+                    regulator-min-microvolt = <2400000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo2 {
+                    regulator-name = "slg51000_b_ldo2";
+                    regulator-min-microvolt = <2400000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo3 {
+                    regulator-name = "slg51000_b_ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+
+                ldo4 {
+                    regulator-name = "slg51000_b_ldo4";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+
+                ldo5 {
+                    regulator-name = "slg51000_b_ldo5";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo6 {
+                    regulator-name = "slg51000_b_ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo7 {
+                    regulator-name = "slg51000_b_ldo7";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 2e720d152890..0221397eb51e 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -29,10 +29,12 @@ properties:
     patternProperties:
       "^buck[1-4]$":
         $ref: regulator.yaml#
+        unevaluatedProperties: false
         type: object
 
       "^ldo[1-4]$":
         $ref: regulator.yaml#
+        unevaluatedProperties: false
         type: object
 
     additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index f3fcfc8be72f..6de5b027f990 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -21,7 +21,6 @@ properties:
 
   regulators:
     type: object
-    $ref: regulator.yaml#
 
     description: |
       list of regulators provided by this controller, must be named
@@ -39,11 +38,13 @@ properties:
       ldortc:
         type: object
         $ref: regulator.yaml#
+        unevaluatedProperties: false
 
     patternProperties:
       "^ldo[1-4]$":
         type: object
         $ref: regulator.yaml#
+        unevaluatedProperties: false
 
       "^buck[1-4]$":
         type: object
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index e384e4953f0a..0eda44752cdd 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -68,18 +68,22 @@ properties:
       "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
         $ref: regulator.yaml#
         type: object
+        unevaluatedProperties: false
 
       "^vgen[1-6]$":
         $ref: regulator.yaml#
         type: object
+        unevaluatedProperties: false
 
       "^vldo[1-4]$":
         $ref: regulator.yaml#
         type: object
+        unevaluatedProperties: false
 
       "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
         $ref: regulator.yaml#
         type: object
+        unevaluatedProperties: false
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
index 8a08698e3484..b4eb4001eb3d 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
@@ -49,7 +49,7 @@ patternProperties:
   ".*-supply$":
     description: Input supply phandle(s) for this node
 
-  "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$":
+  "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$":
     description: List of regulators and its properties
     $ref: regulator.yaml#
     unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index b9498504ad79..127a6f39b7f0 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -53,6 +53,7 @@ description: |
       For PMR735A, smps1 - smps3, ldo1 - ldo7
       For PMX55, smps1 - smps7, ldo1 - ldo16
       For PMX65, smps1 - smps8, ldo1 - ldo21
+      For PMX75, smps1 - smps10, ldo1 - ldo21
 
 properties:
   compatible:
@@ -84,13 +85,14 @@ properties:
       - qcom,pmr735a-rpmh-regulators
       - qcom,pmx55-rpmh-regulators
       - qcom,pmx65-rpmh-regulators
+      - qcom,pmx75-rpmh-regulators
 
   qcom,pmic-id:
     description: |
         RPMh resource name suffix used for the regulators found
         on this PMIC.
     $ref: /schemas/types.yaml#/definitions/string
-    enum: [a, b, c, d, e, f, g, h, k]
+    enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n]
 
   qcom,always-wait-for-ack:
     description: |
@@ -109,6 +111,7 @@ properties:
   bob:
     type: object
     $ref: regulator.yaml#
+    unevaluatedProperties: false
     description: BOB regulator node.
     dependencies:
       regulator-allow-set-load: [ regulator-allowed-modes ]
@@ -117,6 +120,7 @@ patternProperties:
   "^(smps|ldo|lvs|bob)[0-9]+$":
     type: object
     $ref: regulator.yaml#
+    unevaluatedProperties: false
     description: smps/ldo regulator nodes(s).
     dependencies:
       regulator-allow-set-load: [ regulator-allowed-modes ]
@@ -424,10 +428,28 @@ allOf:
         vdd-l11-l13-supply: true
       patternProperties:
         "^vdd-l[1347]-supply$": true
-        "^vdd-l1[0245789]-supply$": true
+        "^vdd-l1[024579]-supply$": true
         "^vdd-l2[01]-supply$": true
         "^vdd-s[1-8]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx75-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l18-supply: true
+        vdd-l4-l16-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l8-l9-supply: true
+        vdd-l11-l13-supply: true
+        vdd-l20-l21-supply: true
+      patternProperties:
+        "^vdd-l[137]-supply$": true
+        "^vdd-l1[024579]-supply$": true
+        "^vdd-s([1-9]|10)-supply$": true
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
new file mode 100644
index 000000000000..f02f97d4fdd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,sdm845-refgen-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. REFGEN Regulator
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The REFGEN (reference voltage generator) regulator provides reference
+  voltage for on-chip IPs (like PHYs) on some Qualcomm SoCs.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-refgen-regulator
+              - qcom,sc8180x-refgen-regulator
+              - qcom,sm8150-refgen-regulator
+          - const: qcom,sdm845-refgen-regulator
+
+      - items:
+          - enum:
+              - qcom,sc7280-refgen-regulator
+              - qcom,sc8280xp-refgen-regulator
+              - qcom,sm6350-refgen-regulator
+              - qcom,sm6375-refgen-regulator
+              - qcom,sm8350-refgen-regulator
+          - const: qcom,sm8250-refgen-regulator
+
+      - enum:
+          - qcom,sdm845-refgen-regulator
+          - qcom,sm8250-refgen-regulator
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator@162f000 {
+      compatible = "qcom,sm8250-refgen-regulator";
+      reg = <0x0162f000 0x84>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index a8ca8e0b27f8..9ea8ac0786ac 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -110,6 +110,7 @@ patternProperties:
   "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
     description: List of regulators and its properties
     $ref: regulator.yaml#
+    unevaluatedProperties: false
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
index d9c23333e157..cd06e957b9db 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
@@ -29,6 +29,7 @@ patternProperties:
   "^DSV(LCM|P|N)$":
     type: object
     $ref: regulator.yaml#
+    unevaluatedProperties: false
     description:
       Properties for single Display Bias Voltage regulator.
 
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
index 358297dd3fb7..e95e046e9ed6 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
@@ -21,6 +21,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - richtek,rt5733
       - richtek,rt5739
 
   reg:
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
index 446ec5127d1f..fec3d396ca50 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
@@ -121,6 +121,7 @@ properties:
     description: load switch current regulator description.
     type: object
     $ref: regulator.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
new file mode 100644
index 000000000000..609c06615bdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2208 SubPMIC Regulator
+
+maintainers:
+  - Alina Yu <alina_yu@richtek.com>
+
+description: |
+  RTQ2208 is a highly integrated power converter that offers functional safety dual
+  multi-configurable synchronous buck converters and two LDOs.
+
+  Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted
+  switching operation in normal mode; the latter defines the operation in suspend to RAM mode.
+
+  No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching
+  operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous
+  conduction mode (FCCM).
+
+  The definition of modes is in the datasheet which is available in below link
+  and their meaning is::
+    0 - Auto mode for power saving, which reducing the switching frequency at light load condition
+    to maintain high frequency.
+    1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency.
+
+  Datasheet will be available soon at
+  https://www.richtek.com/assets/Products
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq2208
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    
+  richtek,mtp-sel-high:
+    type: boolean
+    description:
+      vout register selection based on this boolean value.
+      false - Using DVS0 register setting to adjust vout
+      true - Using DVS1 register setting to adjust vout
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^buck-[a-h]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          description for buck-[a-h] regulator.
+
+        properties:
+          regulator-allowed-modes:
+            description:
+              two buck modes in different switching accuracy.
+              0 - Auto mode
+              1 - FCCM
+            items:
+              enum: [0, 1]
+
+      "^ldo[1-2]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          regulator description for ldo[1-2].
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@10 {
+        compatible = "richtek,rtq2208";
+        reg = <0x10>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        richtek,mtp-sel-high;
+
+        regulators {
+          buck-a {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-b {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-c {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-d {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-e {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-f {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-g {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-h {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          ldo1 {
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+            };
+          };
+          ldo2 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
index e6e5a9a7d940..ef62c618de67 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
@@ -35,6 +35,7 @@ properties:
       "^(p|n)avdd$":
         type: object
         $ref: regulator.yaml#
+        unevaluatedProperties: false
         description: |
           regulator description for pavdd and navdd.
 
diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt
deleted file mode 100644
index aa0733e49b90..000000000000
--- a/Documentation/devicetree/bindings/regulator/slg51000.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Dialog Semiconductor SLG51000 Voltage Regulator
-
-Required properties:
-- compatible : Should be "dlg,slg51000" for SLG51000
-- reg : Specifies the I2C slave address.
-- xxx-supply: Input voltage supply regulator for ldo3 to ldo7.
-  These entries are required if regulators are enabled for a device.
-  An absence of these properties can cause the regulator registration to fail.
-  If some of input supply is powered through battery or always-on supply then
-  also it is required to have these parameters with proper node handle of always
-  on power supply.
-    vin3-supply: Input supply for ldo3
-    vin4-supply: Input supply for ldo4
-    vin5-supply: Input supply for ldo5
-    vin6-supply: Input supply for ldo6
-    vin7-supply: Input supply for ldo7
-
-Optional properties:
-- interrupt-parent : Specifies the reference to the interrupt controller.
-- interrupts : IRQ line information.
-- dlg,cs-gpios : Specify a valid GPIO for chip select
-
-Sub-nodes:
-- regulators : This node defines the settings for the regulators.
-  The content of the sub-node is defined by the standard binding
-  for regulators; see regulator.txt.
-
-  The SLG51000 regulators are bound using their names listed below:
-    ldo1
-    ldo2
-    ldo3
-    ldo4
-    ldo5
-    ldo6
-    ldo7
-
-Optional properties for regulators:
-- enable-gpios : Specify a valid GPIO for platform control of the regulator.
-
-Example:
-	pmic: slg51000@75 {
-		compatible = "dlg,slg51000";
-		reg = <0x75>;
-
-		regulators {
-			ldo1 {
-			        regulator-name = "ldo1";
-			        regulator-min-microvolt = <2400000>;
-			        regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2 {
-			        regulator-name = "ldo2";
-			        regulator-min-microvolt = <2400000>;
-			        regulator-max-microvolt = <3300000>;
-			};
-
-			ldo3 {
-			        regulator-name = "ldo3";
-			        regulator-min-microvolt = <1200000>;
-			        regulator-max-microvolt = <3750000>;
-			};
-
-			ldo4 {
-			        regulator-name = "ldo4";
-			        regulator-min-microvolt = <1200000>;
-			        regulator-max-microvolt = <3750000>;
-			};
-
-			ldo5 {
-			        regulator-name = "ldo5";
-			        regulator-min-microvolt = <500000>;
-			        regulator-max-microvolt = <1200000>;
-			};
-
-			ldo6 {
-			        regulator-name = "ldo6";
-			        regulator-min-microvolt = <500000>;
-			        regulator-max-microvolt = <1200000>;
-			};
-
-			ldo7 {
-			        regulator-name = "ldo7";
-			        regulator-min-microvolt = <1200000>;
-			        regulator-max-microvolt = <3750000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index 7d53cfa2c288..c9586d277f41 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -25,8 +25,8 @@ properties:
 patternProperties:
   "^(reg11|reg18|usb33)$":
     type: object
-
     $ref: regulator.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
index 011819c10988..11e378648b3f 100644
--- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -29,11 +29,13 @@ properties:
       Initial data for the LDO1 regulator.
     $ref: regulator.yaml#
     type: object
+    unevaluatedProperties: false
 
   micvdd:
     description:
       Initial data for the MICVDD regulator.
     $ref: regulator.yaml#
     type: object
+    unevaluatedProperties: false
 
 additionalProperties: true