Merge tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These extend the int340x thermal driver, add thermal DT bindings for
  some Qcom platforms, add DT bindings and support for Armada AP807 and
  MSM8909, allow selecting the bang-bang thermal governor as the default
  one, address issues in several thermal drivers for ARM platforms and
  clean up code.

  Specifics:

   - Add new IOCTLs to the int340x thermal driver to allow user space to
     retrieve the Passive v2 thermal table (Srinivas Pandruvada)

   - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms
     (Konrad Dybcio)

   - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)

   - Add DT bindings for QCom ipq9574 (Praveenkumar I)

   - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)

   - Allow selecting the bang-bang governor as default (Thierry Reding)

   - Refactor and prepare the code to set the scene for RCar Gen4
     (Wolfram Sang)

   - Clean up and fix the QCom tsens drivers. Add DT bindings and
     calibration for the MSM8909 platform (Stephan Gerhold)

   - Revert a patch introducing a wrong usage of devm_of_iomap() on the
     Mediatek platform (Ricardo Cañuelo)

   - Fix the clock vs reset ordering in order to conform to the
     documentation on the sun8i (Christophe JAILLET)

   - Prevent setting up undocumented registers, enable the only
     described sensors and add the version 2.1 on the Qoriq sensor (Peng
     Fan)

   - Add DT bindings and support for the Armada AP807 (Alex Leibovich)

   - Update the mlx5 driver with the recent thermal changes (Daniel
     Lezcano)

   - Convert to platform remove callback returning void on STM32 (Uwe
     Kleine-König)

   - Add an error information printing for devm_thermal_add_hwmon_sysfs()
     and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
     Qoriq, Mediateka and QCom (Yangtao Li)

   - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)

   - Use the dev_err_probe() function in the QCom tsens alarm driver
     (Luca Weiss)"

* tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
  thermal/drivers/qcom: Remove redundant msg at probe time
  thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
  thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
  thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
  drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
  thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
  thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
  thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
  thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
  thermal/drivers/stm32: Convert to platform remove callback returning void
  net/mlx5: Update the driver with the recent thermal changes
  thermal/drivers/armada: Add support for AP807 thermal data
  dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
  thermal/drivers/qoriq: Support version 2.1
  thermal/drivers/qoriq: Only enable supported sensors
  thermal/drivers/qoriq: No need to program site adjustment register
  thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
  ...

4 files changed, 60 insertions, 62 deletions

diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index b0bee7e42038..ab8b8fccc7af 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -8,6 +8,7 @@ Required properties:
     * marvell,armada380-thermal
     * marvell,armadaxp-thermal
     * marvell,armada-ap806-thermal
+    * marvell,armada-ap807-thermal
     * marvell,armada-cp110-thermal
 
 Note: these bindings are deprecated for AP806/CP110 and should instead
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
deleted file mode 100644
index a3e9ec5dc7ac..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Binding for Thermal Sensor driver for BCM2835 SoCs.
-
-Required parameters:
--------------------
-
-compatible: 		should be one of: "brcm,bcm2835-thermal",
-			"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
-reg:			Address range of the thermal registers.
-clocks: 		Phandle of the clock used by the thermal sensor.
-#thermal-sensor-cells:	should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml)
-
-Example:
-
-thermal-zones {
-	cpu_thermal: cpu-thermal {
-		polling-delay-passive = <0>;
-		polling-delay = <1000>;
-
-		thermal-sensors = <&thermal>;
-
-		trips {
-			cpu-crit {
-				temperature	= <80000>;
-				hysteresis	= <0>;
-				type		= "critical";
-			};
-		};
-
-		coefficients = <(-538)	407000>;
-
-		cooling-maps {
-		};
-	};
-};
-
-thermal: thermal@7e212000 {
-	compatible = "brcm,bcm2835-thermal";
-	reg = <0x7e212000 0x8>;
-	clocks = <&clocks BCM2835_CLOCK_TSENS>;
-	#thermal-sensor-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
new file mode 100644
index 000000000000..2b6026d9fbcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 thermal sensor
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-thermal
+      - brcm,bcm2836-thermal
+      - brcm,bcm2837-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#thermal-sensor-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    thermal@7e212000 {
+      compatible = "brcm,bcm2835-thermal";
+      reg = <0x7e212000 0x8>;
+      clocks = <&clocks BCM2835_CLOCK_TSENS>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963a6834..27e9e16e6455 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -29,6 +29,8 @@ properties:
         items:
           - enum:
               - qcom,mdm9607-tsens
+              - qcom,msm8226-tsens
+              - qcom,msm8909-tsens
               - qcom,msm8916-tsens
               - qcom,msm8939-tsens
               - qcom,msm8974-tsens
@@ -48,6 +50,7 @@ properties:
               - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
+              - qcom,qcm2290-tsens
               - qcom,sc7180-tsens
               - qcom,sc7280-tsens
               - qcom,sc8180x-tsens
@@ -56,6 +59,7 @@ properties:
               - qcom,sdm845-tsens
               - qcom,sm6115-tsens
               - qcom,sm6350-tsens
+              - qcom,sm6375-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
               - qcom,sm8350-tsens
@@ -67,6 +71,12 @@ properties:
         enum:
           - qcom,ipq8074-tsens
 
+      - description: v2 of TSENS with combined interrupt
+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
+
   reg:
     items:
       - description: TM registers
@@ -223,12 +233,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq8064-tsens
-              - qcom,mdm9607-tsens
-              - qcom,msm8916-tsens
               - qcom,msm8960-tsens
-              - qcom,msm8974-tsens
-              - qcom,msm8976-tsens
-              - qcom,qcs404-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1
     then:
@@ -244,22 +249,7 @@ allOf:
       properties:
         compatible:
           contains:
-            enum:
-              - qcom,msm8953-tsens
-              - qcom,msm8996-tsens
-              - qcom,msm8998-tsens
-              - qcom,sc7180-tsens
-              - qcom,sc7280-tsens
-              - qcom,sc8180x-tsens
-              - qcom,sc8280xp-tsens
-              - qcom,sdm630-tsens
-              - qcom,sdm845-tsens
-              - qcom,sm6350-tsens
-              - qcom,sm8150-tsens
-              - qcom,sm8250-tsens
-              - qcom,sm8350-tsens
-              - qcom,sm8450-tsens
-              - qcom,tsens-v2
+            const: qcom,tsens-v2
     then:
       properties:
         interrupts: