ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 893 deletions

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
deleted file mode 100644
index b6b27e93857f..000000000000
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ /dev/null
@@ -1,893 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
- *
- * Based on omap3-beagle-xm.dts
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "OMAP3 GTA04";
-	compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd;
-		display1 = &tv0;
-		/delete-property/ mmc2;
-		/delete-property/ mmc3;
-	};
-
-	ldo_3v3: fixedregulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ldo_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	/* fixed 26MHz oscillator */
-	hfclk_26m: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		aux-button {
-			label = "aux";
-			linux,code = <KEY_PHONE>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-	};
-
-	antenna-detect {
-		compatible = "gpio-keys";
-
-		gps_antenna_button: gps-antenna-button {
-			label = "GPS_EXT_ANT";
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LINEIN_INSERT>;
-			gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
-			interrupt-parent = <&gpio5>;
-			interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "gta04";
-
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	/* GSM audio */
-	sound_telephony {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "GTA04 voice";
-		simple-audio-card,bitclock-master = <&telephony_link_master>;
-		simple-audio-card,frame-master = <&telephony_link_master>;
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-inversion;
-		simple-audio-card,frame-inversion;
-		simple-audio-card,cpu {
-			sound-dai = <&mcbsp4>;
-		};
-
-		telephony_link_master: simple-audio-card,codec {
-			sound-dai = <&gtm601_codec>;
-		};
-	};
-
-	gtm601_codec: gsm_codec {
-		compatible = "option,gtm601";
-		#sound-dai-cells = <0>;
-	};
-
-	spi_lcd: spi {
-		compatible = "spi-gpio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi_gpio_pins>;
-
-		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-
-		/* lcd panel */
-		lcd: td028ttec1@0 {
-			compatible = "tpo,td028ttec1";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-
-			backlight = <&backlight>;
-			label = "lcd";
-			port {
-				lcd_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm11 0 12000000 0>;
-		pwm-names = "backlight";
-		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <9>;	/* => 90 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-	};
-
-	pwm11: pwm-11 {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer11>;
-		#pwm-cells = <3>;
-		ti,clock-source = <0x01>;
-	};
-
-	hsusb2_phy: hsusb2-phy-pins {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-		#phy-cells = <0>;
-	};
-
-	tv0: connector {
-		compatible = "composite-video-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&opa_out>;
-			};
-		};
-	};
-
-	tv_amp: opa362 {
-		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				opa_in: endpoint {
-					remote-endpoint = <&venc_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				opa_out: endpoint {
-					remote-endpoint = <&tv_connector_in>;
-				};
-			};
-		};
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
-	};
-
-	/* devconf0 setup for mcbsp1 clock pins */
-	pinmux@48002274 {
-		compatible = "pinctrl-single";
-		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7>;	/* MCBSP1 CLK pinmux */
-		#pinctrl-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcbsp1_devconf0_pins>;
-		mcbsp1_devconf0_pins: mcbsp1-devconf0-pins {
-			/*                   offset bits mask */
-			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
-		};
-	};
-
-	/* devconf1 setup for tvout pins */
-	pinmux@480022d8 {
-		compatible = "pinctrl-single";
-		reg = <0x480022d8 4>;	/* CONTROL_DEVCONF1 */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x81>;	/* TV out pin control */
-		#pinctrl-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tv_acbias_devconf1_pins>;
-		tv_acbias_devconf1_pins: tv-acbias-devconf1-pins {
-			/*			offset	bits	mask */
-			pinctrl-single,bits = <0x00 0x40800 0x40800>;	/* set TVOUTBYPASS and TVOUTACEN */
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: gpio1-pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
-			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	hsusb2_pins: hsusb2-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	uart1_pins: uart1-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: uart2-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: uart3-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	mmc1_pins: mmc1-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	backlight_pins: backlight-pinmux-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
-		>;
-	};
-
-	dss_dpi_pins: dss-dpi-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-
-	gps_pins: gps-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
-		>;
-	};
-
-	hdq_pins: hdq-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
-		>;
-	};
-
-	bmp085_pins: bmp085-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
-		>;
-	};
-
-	bma180_pins: bma180-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
-		>;
-	};
-
-	itg3200_pins: itg3200-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
-		>;
-	};
-
-	hmc5843_pins: hmc5843-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
-		>;
-	};
-
-	penirq_pins: penirq-pins {
-		pinctrl-single,pins = <
-			/* here we could enable to wakeup the cpu from suspend by a pen touch */
-			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
-		>;
-	};
-
-	camera_pins: camera-pins {
-		pinctrl-single,pins = <
-			/* set up parallel camera interface */
-			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
-			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
-			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
-			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
-			OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
-			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
-			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
-			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
-			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
-			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
-		>;
-	};
-
-	mcbsp1_pins: mcbsp1-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
-			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
-			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
-			/* mcbsp_clks is used as PENIRQ */
-			/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)	   mcbsp_clks.mcbsp_clks */
-			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
-		>;
-	};
-
-	mcbsp2_pins: mcbsp2-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dx */
-		>;
-	};
-
-	mcbsp3_pins: mcbsp3-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dx */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dr */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_clkx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_fsx */
-		>;
-	};
-
-	mcbsp4_pins: mcbsp4-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_clkx */
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_dr */
-			OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_dx.mcbsp4_fsx */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: hsusb2-2-pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	spi_gpio_pins: spi-gpio-pinmux-pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		clocks = <&hfclk_26m>;
-		clock-names = "fck";
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			ti,enable-vibra = <1>;
-			codec {
-				ti,ramp_delay_value = <3>;
-			};
-		};
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-idle";
-			ti,system-power-controller;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	/* pressure sensor */
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bmp085_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
-		vdda-supply = <&vio>;
-		vddd-supply = <&vio>;
-	};
-
-	/* accelerometer */
-	bma180@41 {
-		compatible = "bosch,bma180";
-		reg = <0x41>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bma180_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
-	};
-
-	/* gyroscope */
-	itg3200@68 {
-		compatible = "invensense,itg3200";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&itg3200_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
-	};
-
-	/* leds + gpios */
-	tca6507: tca6507@45 {
-		compatible = "ti,tca6507";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x45>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gta04_led0: led@0 {
-			label = "gta04:red:aux";
-			reg = <0x0>;
-		};
-
-		gta04_led1: led@1 {
-			label = "gta04:green:aux";
-			reg = <0x1>;
-		};
-
-		gta04_led3: led@3 {
-			label = "gta04:red:power";
-			reg = <0x3>;
-			linux,default-trigger = "default-on";
-		};
-
-		gta04_led4: led@4 {
-			label = "gta04:green:power";
-			reg = <0x4>;
-		};
-
-		wifi_reset: led@6 {
-			/* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
-			reg = <0x6>;
-			compatible = "gpio";
-		};
-	};
-
-	/* compass aka magnetometer */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5883l";
-		reg = <0x1e>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hmc5843_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;	/* gpio112 */
-	};
-
-	/* touchscreen */
-	tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&penirq_pins>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
-		ti,x-plate-ohms = <600>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <640>;
-		touchscreen-max-pressure = <1000>;
-		touchscreen-fuzz-x = <3>;
-		touchscreen-fuzz-y = <8>;
-		touchscreen-fuzz-pressure = <10>;
-		touchscreen-inverted-y;
-	};
-
-	/* RFID EEPROM */
-	m24lr64@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mcspi1 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "disabled";
-};
-
-&mcspi3 {
-	status = "disabled";
-};
-
-&mcspi4 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	ti,non-removable;
-	broken-cd;	/* hardware has no CD */
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux4>;
-	bus-width = <4>;
-	ti,non-removable;
-	cap-power-off-card;
-	mmc-pwrseq = <&wifi_pwrseq>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-#define BIT(x) (1 << (x))
-&twl_gpio {
-	/* pullups: BIT(2) */
-	ti,pullups = <BIT(2)>;
-	/*
-	 * pulldowns:
-	 * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
-			 BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
-};
-
-&twl_keypad {
-	status = "disabled";
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	gnss: gnss {
-		compatible = "wi2wi,w2sg0004";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gps_pins>;
-		sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		lna-supply = <&vsim>;
-		vcc-supply = <&ldo_3v3>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-/* spare */
-&vaux1 {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-/* sensors */
-&vaux2 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-always-on;	/* we should never switch off while vio is on! */
-};
-
-/* camera */
-&vaux3 {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
-};
-
-/* WLAN/BT */
-&vaux4 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* GPS LNA */
-&vsim {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* Needed to power the DPI pins */
-
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = < &dss_dpi_pins >;
-
-	status = "okay";
-	vdds_dsi-supply = <&vpll2>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "okay";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&opa_in>;
-			ti,channels = <1>;
-			ti,invert-polarity;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		ti,nand-ecc-opt = "ham1";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gpmc,device-width = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,we-off-ns = <40>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,sync-clk-ps = <0>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-
-		bootloaders_env@240000 {
-			label = "U-Boot Env";
-			reg = <0x240000 0x40000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x600000>;
-		};
-
-		filesystem@880000 {
-			label = "File System";
-			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
-		};
-	};
-};
-
-&mcbsp1 { /* FM Transceiver PCM */
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-};
-
-&mcbsp2 { /* TPS65950 I2S */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-};
-
-&mcbsp3 { /* Bluetooth PCM */
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp3_pins>;
-};
-
-&mcbsp4 { /* GSM voice PCM */
-	status = "okay";
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp4_pins>;
-};
-
-&hdqw1w {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-/* image signal processor within OMAP3 SoC */
-&isp {
-	ports {
-		port@0 {
-			reg = <0>;
-			parallel_ep: endpoint {
-				ti,isp-clock-divisor = <1>;
-				ti,strobe-mode;
-				bus-width = <8>;/* Used data lines */
-				data-shift = <2>; /* Lines 9:2 are used */
-				hsync-active = <0>; /* Active low */
-				vsync-active = <1>; /* Active high */
-				data-active = <1>;/* Active high */
-				pclk-sample = <1>;/* Falling */
-			};
-		};
-		/* port@1 and port@2 are not used by GTA04 */
-	};
-};