Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 448 deletions

diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
deleted file mode 100644
index f28a4c3ea501..000000000000
--- a/arch/arm/mach-omap1/board-h2.c
+++ /dev/null
@@ -1,448 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2.c
- *
- * Board specific inits for OMAP-1610 H2
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * H2 specific changes and cleanup
- * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
- */
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-#include "board-h2.h"
-
-/* The first 16 SoC GPIO lines are on this GPIO chip */
-#define OMAP_GPIO_LABEL			"gpio-0-15"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-static const unsigned int h2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-static struct mtd_partition h2_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data h2_nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= h2_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
-};
-
-static struct resource h2_nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nor_resource,
-};
-
-static struct mtd_partition h2_nand_partitions[] = {
-#if 0
-	/* REVISIT:  enable these partitions if you make NAND BOOT
-	 * work on your H2 (rev C or newer); published versions of
-	 * x-load only support P2 and H3.
-	 */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H2_NAND_RB_GPIO_PIN	62
-
-static int h2_nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data h2_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
-		.partitions		= h2_nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= h2_nand_dev_ready,
-	},
-};
-
-static struct resource h2_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nand_resource,
-};
-
-static struct smc91x_platdata h2_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource h2_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1610_ETHR_START,		/* Physical */
-		.end	= OMAP1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device h2_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &h2_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
-	.resource	= h2_smc91x_resources,
-};
-
-static struct resource h2_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h2_keymap_data = {
-	.keymap		= h2_keymap,
-	.keymap_size	= ARRAY_SIZE(h2_keymap),
-};
-
-static struct omap_kp_platform_data h2_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h2_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h2_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h2_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h2_kp_resources),
-	.resource	= h2_kp_resources,
-};
-
-static const struct gpio_led h2_gpio_led_pins[] = {
-	{
-		.name		= "h2:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h2:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h2_gpio_led_data = {
-	.leds		= h2_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
-};
-
-static struct platform_device h2_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h2_gpio_led_data,
-	},
-};
-
-static struct platform_device *h2_devices[] __initdata = {
-	&h2_nor_device,
-	&h2_nand_device,
-	&h2_smc91x_device,
-	&h2_kp_device,
-	&h2_gpio_leds,
-};
-
-static void __init h2_init_smc91x(void)
-{
-	if (gpio_request(0, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-}
-
-static int tps_setup(struct i2c_client *client, void *context)
-{
-	if (!IS_BUILTIN(CONFIG_TPS65010))
-		return -ENOSYS;
-
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
-				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
-
-	return 0;
-}
-
-static struct tps65010_board tps_board = {
-	.base		= H2_TPS_GPIO_BASE,
-	.outmask	= 0x0f,
-	.setup		= tps_setup,
-};
-
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.platform_data	= &tps_board,
-	}, {
-		.type = "isp1301_omap",
-		.addr = 0x2d,
-		.dev_name = "isp1301",
-	},
-};
-
-static struct gpiod_lookup_table isp1301_gpiod_table = {
-	.dev_id = "isp1301",
-	.table = {
-		/* Active low since the irq triggers on falling edge */
-		GPIO_LOOKUP(OMAP_GPIO_LABEL, 2,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init h2_init(void)
-{
-	h2_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
-	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
-	 * detecting that in code here, to avoid probing every possible flash
-	 * configuration...
-	 */
-	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
-	h2_nor_resource.end += SZ_32M - 1;
-
-	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
-	h2_nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
-
-	gpiod_add_lookup_table(&isp1301_gpiod_table);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* MMC:  card detect and WP */
-	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
-	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	h2_smc91x_resources[1].start = gpio_to_irq(0);
-	h2_smc91x_resources[1].end = gpio_to_irq(0);
-	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
-	omap_serial_init();
-
-	/* ISP1301 IRQ wired at M14 */
-	omap_cfg_reg(M14_1510_GPIO2);
-	h2_i2c_board_info[0].irq = gpio_to_irq(58);
-	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
-			      ARRAY_SIZE(h2_i2c_board_info));
-	omap1_usb_init(&h2_usb_config);
-	h2_mmc_init();
-
-	omapfb_set_lcd_config(&h2_lcd_config);
-}
-
-MACHINE_START(OMAP_H2, "TI-H2")
-	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END