diff options
author | Stephan Gerhold <stephan@gerhold.net> | 2023-05-29 15:46:58 +0300 |
---|---|---|
committer | Bjorn Andersson <andersson@kernel.org> | 2023-05-30 00:37:01 +0300 |
commit | 41e22c2ff38eaea777f1158071539e659aa7980d (patch) | |
tree | cba75067ec38286420d058ae1040ee0f1802bde3 /arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | |
parent | eaa53a85748d58c4398c5c9acaa8d01d92adbb67 (diff) | |
download | linux-41e22c2ff38eaea777f1158071539e659aa7980d.tar.xz |
arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
MSM8916 is the only ARM64 Qualcomm SoC that is still using the old
&msmgpio name. Change this to &tlmm to avoid confusion.
Note that the node ordering does not change because the MSM8916 device
trees have pinctrl separated at the bottom (similar to sc7180).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-1-bec0f5fb46fb@gerhold.net
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 34 |
1 files changed, 17 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 29aaa35438a3..b02e8f9a8ca0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -43,7 +43,7 @@ button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -55,21 +55,21 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_RED>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-1 { - gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-2 { - gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_BLUE>; default-state = "off"; function = LED_FUNCTION_INDICATOR; @@ -78,7 +78,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -94,7 +94,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -104,7 +104,7 @@ compatible = "kionix,kx023-1025"; reg = <0x1e>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -122,7 +122,7 @@ compatible = "avago,apds9930"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -146,7 +146,7 @@ regulator-name = "outp"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; @@ -154,7 +154,7 @@ regulator-name = "outn"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; }; @@ -169,7 +169,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -199,11 +199,11 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x28>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; @@ -264,7 +264,7 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; /* - * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>. * However, gpio38 does not change its state when inserting/removing the * SD card, it's just low all the time. The Huawei kernel seems to use * polling for SD card detection instead. @@ -276,7 +276,7 @@ * Maybe Huawei decided to replace the second SIM card slot with the * SD card slot and forgot to re-route to gpio38. */ - cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; }; &sound { @@ -338,7 +338,7 @@ compatible = "qcom,wcn3620"; }; -&msmgpio { +&tlmm { accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; |