summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/renesas/r8a77990.dtsi
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2019-01-30 19:53:27 +0300
committerArnd Bergmann <arnd@arndb.de>2019-01-30 19:55:11 +0300
commitd2849a5871f183d500a45d0ba849cc7e43ea3792 (patch)
treee204acecbd1f99fdcf8b14a6dd16b80b320fbb8c /arch/arm64/boot/dts/renesas/r8a77990.dtsi
parent4165ef5d00be0f6d38bb1afd22fdd435fcdf35eb (diff)
parent3e279a1d44d73aea9ce428ae68e76bf85117031a (diff)
downloadlinux-d2849a5871f183d500a45d0ba849cc7e43ea3792.tar.xz
Merge tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Renesas ARM64 Based SoC DT Updates for v5.1 R-Car H3 (r8a7795) SoC - Sort i2c and pciec0 nodes within soc node R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs - Remove BUSIF0 settings from rcar_sound,ssi R-Car M3-W (r8a7796) based Salvator-XS board - Convert to new LVDS DT bindings R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Use audio-graph-card to allow secondary sound device on kingfisher daugher board - Add HDMI sound support Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Add pcm3168 sound codec R-Car E3 (r8a77990) SoC - Enable DMA for SCIF2 R-Car E3 (r8a77990) based Ebisu board - HS400 for onboard eMMC - Use simple-audio-card rather than simple-scu-audio-card - Correct EthernetAVB phy mode as rgmii - Add backlight and follow-up to correct duplicate regulator number R-Car V3M (r8a77970) based v3msk starter kit - Specify EtherAVB PHY IRQ now that GPIO support is present R-Car D3 (r8a77995) based draak board - Set better backlight levels RZ/G2M (r8a774a1) SoC - Correct hsusb reg size RZ/G2E (r8a774c0) SoC - Intial SoC DT - Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI, I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output, USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support - A follow-up patch included in this pull-request enables DMA for SCIF2 so that DMA is enabled for all SCIF nodes * tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (44 commits) arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 arm64: dts: renesas: r8a77990: Enable DMA for SCIF2 arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2 arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec arm64: dts: renesas: ulcb: add HDMI sound support arm64: dts: renesas: ulcb: use audio-graph-card arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node arm64: dts: renesas: r8a77990: sort pciec0 node within soc node arm64: dts: renesas: r8a774a1: Fix hsusb reg size arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes arm64: dts: renesas: r8a774c0: Add PCIe device node arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a77990.dtsi')
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi194
1 files changed, 98 insertions, 96 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 5ce2dcea5136..732ead4a94d1 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -240,6 +240,74 @@
resets = <&cpg 906>;
};
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a77990";
+ reg = <0 0xe6060000 0 0x508>;
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a77990";
+ reg = <0 0xe60b0000 0 0x15>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a77990-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a77990-rst";
+ reg = <0 0xe6160000 0 0x0200>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a77990-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ thermal: thermal@e6190000 {
+ compatible = "renesas,thermal-r8a77990";
+ reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 407>;
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -369,74 +437,6 @@
status = "disabled";
};
- pfc: pin-controller@e6060000 {
- compatible = "renesas,pfc-r8a77990";
- reg = <0 0xe6060000 0 0x508>;
- };
-
- i2c_dvfs: i2c@e60b0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,iic-r8a77990";
- reg = <0 0xe60b0000 0 0x15>;
- interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 926>;
- power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
- resets = <&cpg 926>;
- dmas = <&dmac0 0x11>, <&dmac0 0x10>;
- dma-names = "tx", "rx";
- status = "disabled";
- };
-
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a77990-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
- clock-names = "extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- #reset-cells = <1>;
- };
-
- rst: reset-controller@e6160000 {
- compatible = "renesas,r8a77990-rst";
- reg = <0 0xe6160000 0 0x0200>;
- };
-
- sysc: system-controller@e6180000 {
- compatible = "renesas,r8a77990-sysc";
- reg = <0 0xe6180000 0 0x0400>;
- #power-domain-cells = <1>;
- };
-
- thermal: thermal@e6190000 {
- compatible = "renesas,thermal-r8a77990";
- reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 522>;
- power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
- resets = <&cpg 522>;
- #thermal-sensor-cells = <0>;
- };
-
- intc_ex: interrupt-controller@e61c0000 {
- compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
- #interrupt-cells = <2>;
- interrupt-controller;
- reg = <0 0xe61c0000 0 0x200>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
- GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
- resets = <&cpg 407>;
- };
-
hscif0: serial@e6540000 {
compatible = "renesas,hscif-r8a77990",
"renesas,rcar-gen3-hscif",
@@ -993,7 +993,9 @@
<&cpg CPG_CORE R8A77990_CLK_S3D1C>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
-
+ dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+ <&dmac2 0x13>, <&dmac2 0x12>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
@@ -1526,6 +1528,33 @@
resets = <&cpg 408>;
};
+ pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a77990",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
vspb0: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
@@ -1724,33 +1753,6 @@
};
};
- pciec0: pcie@fe000000 {
- compatible = "renesas,pcie-r8a77990",
- "renesas,pcie-rcar-gen3";
- reg = <0 0xfe000000 0 0x80000>;
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x00 0xff>;
- device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
- /* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
- clock-names = "pcie", "pcie_bus";
- power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
- resets = <&cpg 319>;
- status = "disabled";
- };
-
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;